• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.11-21
• /
• 2022

The COVID-19 started to spread at early 2020 in South Korea and has been threatening our life in many aspects. Countermeasures such as social distancing to prevent COVID-19 spread have brought many changes in our society an human life. In this study, as a part of the COVID-19 pandemic management, drinking water usage change is analyzed to evaluate potential risks on water supply service. We collected hourly water use data of residential area in S city, which is a mid-size city in South Korea, before and after the COVID-19 pandemic. The collected data were analyzed to reveal the changes in total water consumption, water usage weight, and hourly water-demand pattern caused by the COVID-19 pandemic. The case study revealed the noticeable changes in water consumption caused by the COVID-19 pandemic and required more secured and adaptive operation of drinking water system under the pandemic situation caused by infectious disease.

• Water for future
• /
• v.24 no.1
• /
• pp.83-92
• /
• 1991

The purpose of this paper is to estimate river maintenance water of the main gauging stations in Geum river watershed. The estimation methods of river maintenance water are classified into two categories : views of supply and demand. The definition of river main-tenance water in this paper, is the maximum value between mean drought flow and environmental conserving flow. In order to estimate river maintenance water, the mean drought flow estimated at the upstream of the Daecheong Dam but the downstream of the Daecheong Dam estimated mean drought flow and water quality control flow use of QUAL2E Model. In result, a mean drought flow showed large value at the Gong ju and Gyu am station as the downstream of the Daecheong Dam. The river maintenance water is 33.82$m^3$/sec at the Gong ju station, 51.51$m^3$/sec at the Gyu am station. Therefore, an estimation of the river maintenance water in the Geum River watershed concluded suitability which is determined mean drought flow.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.442-446
• /
• 2014

A method for applying emergency ratings to improve the reliability of power supply in ACSR overhead transmission lines is described in this paper. Due to re-regulate power industry, most power companies worldwide as well KEPCO have been searching for only economical strategies without new investment. Power demand was rapidly increasing, however, generation amount did not follow sufficiently. Hence in order to increase the transmission capacity for the existing transmission lines in case of peak load, or contingency in transmission lines, an application method of emergency ratings such as short or long term rating is proposed. If applying long term emergency rating instead of static line rating for the period of a peak load, power transmission can be increased to 10 % or more. Furthermore, it was shown that emergency rating can be effectively used in the contingency of double-circuit transmission lines and/or overload cases.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.61-79
• /
• 2010

As the interest and the importance of environmental protection increases rapidly, the environment considers to be not only the item that requires a control and a duty fundamental element but the fundamental element to enhance the internection icompetitiveness n so. Along with the collapse of the foreign trade barrier and the quality improvement of a customer's life qu life of a an object is shortened liforder to sectsfy the customer's lemands and as the result of it quaother critical issues rmparding the waste treatment and recasles are now thought to be momentou onlyaddition to the issue of the greenhou e gases reduction that is considered as one of me q issues among many internection ienvironmental issues. To keep up the pace with the environmental flow qube notd countries have nlreal iput their attempts to solve this environmental problems through a number of rmpulactios and acctios and they have showed a great concern for it as it is an internection iproblem that they should aasroaeronlythe aspect of not just a compan isr a country but of the wte e globn ivillage. Sueroenvironmental flow alemaned the logistic stratmpy of a compan iand it brought up the demand for the reverse logistics in a supply chain. For the reason above, the concept of reverse logistics and classification, the comparison with any similar concepts and its necessity are studied in this research through the theoretical consideration and the current state of the reverse logistics is organized in this research by acknowledging the domestic development process and the properties regarding the recycles of resources. In addition, the way to apply to the nation was investigated by comparing with the environmentalism development process, the reverse logistics policies and examples of advanced countries in logistics. The research proposed building of intimate cooperative system between a shipper and logistic service provider for the reverse logistics throughout the whole supply chain, the financial support, amendment of regulations, support Eco-friendly logistic technology development and the propagation, effective logistic system development and others and it is expected to bring a significant meaning to the reverse logistic policy and operation later on.

• Journal of Mushroom
• /
• v.3 no.3
• /
• pp.105-108
• /
• 2005

Main materials used as media for oyster mushroom cultivation are pine sawdust, beet pulp, cotton seed pomace. Increases in the price and the unbalance of demand and supply of cotton seed pomace was often damage to oyster mushroom cultivation farm, so we investigated agricultural by-product to replace the cotton seed pomace for bottle cultivation of oyster mushroom. Treatment of coconut oil meal or coconut pomace delayed incubation period about 3 days compared with cotton seed waste treatment(control), but yield and income index showed similar to each other in three treatment. Consequently coconut oil meal and coconut pomace could select for cotton seed pomace substitute.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.854-867
• /
• 2014

In the circumstance that high oil price state is continued over the world, the investment in crude oil development by oil major is a trend of increasing. Recently the number of delivered drill-ship for 5 years has been sharply increased all over the world and about twice than that of past 30 years. As addition to the increase of the drill-ship demand, the operation of drill-ships which is delivered recently is about 3,000 meters, ultra deep sea, on average and the work area is expending. Accordingly the drilling system including the size and length of pipe for drilling has been bigger and bigger and the power supply equipment for operation system also has large capacity. Unlike merchant vessel, high power and high voltage of diesel generators are required for drill-ship for which the demand for V-type 320 bore of diesel generator has increased. It is on the raised that the importance of lubrication oil cleaning for diesel generator on drill-ship which has longer time for construction, and also long term low load operation is unavoidable during commissioning of equipments. Recently it was reported that engine crankpin was damaged due to the hard contact caused by the abnormal wear down(Cam wear) on crankpin and bearing. The same pattern of wear down was found through the inspection on series vessels and the other vessel under commissioning. The purpose of this paper is to analyze of the wear mechanism based on the observation and theories and objective research from actual cases and to prepare the counter measures to avoid foreseeable damage when the lubricating oil is not properly cleaned.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.3-16
• /
• 2014

Car exhaust $CO_2$ gas reduction and fuel efficiency of the car lighter for the current era is a big challenge. The developments of high-performance Nd magnets, Li-ion secondary battery and exhaust gas purification performance of PGM catalysts used in the lightweight EV and HEV are activated. Country in order to improve the car lighter and function that use the resources of rare metals are ubiquitous imported from China because of export supply control, as soaring prices have unstable supply and demand. Compared to the emissions from the next-generation automotive recycling, waste scarce resources need to be. This study investigated the recycling technology analysis and development of the information technology, or delivered to the researchers by giving national car industry aims to contribute to the development. Findings, pulmonary high-performance motor vehicle emissions in the exhaust gas purification PGM Catalysts, Li-ion battery and Nd magnets recycling technology, such as pre- and post-processing techniques to classify technology, pre-urban mining technology mechanical separation by screening techniques under development, the study and post-processing technology has, pyro and hydro metallurgical smelting technology is established. Waste Recycling in terms of economic efficiency of mechanical components for the intensive study of screening techniques is needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.138-144
• /
• 2017

With the increase in power consumption due to the surge in the demand for power, it is necessary to improve the quality or design of the power (supply) for the purpose of reducing the energy consumption and so reduce the power loss. The switchboard is a mechanical device that receives electricity from the electricity generation facilities of KEPCO and divides it into the facilities required for each building. Switchboards generally consist of enclosures, switches, power conductors, and control components. This study deals with energized power conductors, which constitute the main element in the switchboard. Through the measurement of the effective ac resistance, it was confirmed that the vertical array structure of the conventional type plate conductor is inefficient. If the effective AC resistance increases significantly, the sectional area of the conductor becomes relatively large due to the skin effect. In this study, we studied the energy and material savings that could be obtained using the asterisk (*) array structure, which minimizes the effective ac resistance by reducing the skin effect. The core technology principle of this study is the energy saving switchgear based on conductor resistance reduction technology utilizing the asterisk array structure. The present invention involves a plate-shaped conductor arrangement structure capable of canceling out the magnetic field generated on each of the plate conductors (rst or abc) of the AC power supply in the power distribution panel by mutual action. The effect of this structure is to reduce the amount of inductive reactance due to the increase in the cross-sectional area and reduction of the effective AC resistance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.465-471
• /
• 2017

This study examined the effects of neoliberal educational policy on the appointment system of teachers to assess the impacts of this neoliberal education policy. Neoliberal education policy has led to increased private education cost, and strengthened the function of social stratum reproduction in the education system despite increasing the efficiency and flexibility. Since contracted employment was applied to the educational field, the number of regular teachers began to decrease, while that of contracted teachers increased. For example, the number of contracted teachers was 300 in the 1990, which increased to 42,042 in 2015. Neoliberal education policy contributed to teacher's quantitative demand; however, the increase in the number of contracted teachers is ultimately degrading the education quality. In an education market, the issues of balancing between supply and demand often occur. Therefore, it is necessary to strongly control the number of contracted teachers by limiting their contract period. Furthermore, an institutional device that can convert a contracted teacher to a regular one must be established.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.276-284
• /
• 1993

The ABB-CE System-80 reactor power cutback system(RPCS) is designed to enable continuous operation of the reactor without trip in the events of the loss of one of the two main feedwater pumps and loss of load, and thus improves plant availability in a cost effective manner. In this study expansion of RPCS has been investigated for continuous reactor operation without trip in the event of an inward control element assembly(CEA) deviation including a single rod drop. Under the expanded function of RPCS the control system will provide a rapid core power reduction on demand by releasing CEAs to drop into the core and reduce the turbine power, if necessary, to follow the reactor power variation. This design feature which is included as the new design features to be incorporated in the ABB-CE System-80+ meets the EPRI advanced light water reactor(ALWR) requirements. For this study core analysis models of System-80+ have been developed to simulate the nuclear steam supply system(NSSS) response as well as the RPCS initiation of rapid CEA insertion. The results of this study demonstrate that the reactor trip can be avoided in the event of inward CEA deviation including a single rod drop by the RPCS initiation and thus the plant availability and capacity factor would be increased.