• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.734-741
• /
• 2004

This paper presents a network based fire detection system using CAN, in order to evaluate feasibility of home automation protocol for smart home. In general, because a traditional fire detection system has an analog transmission method with 4-20mA current, it has several shortcomings such as weakness to noise. Hence, as an alternative to the traditional system, this paper presents the architecture of CAN based fire detection system and the design method of CAN communication network. Also, the performance of the suggested system is evaluated through an experimental testbed. Especially, CAN has several advantages such as low cost and easiness of implementation compared to Ethernet or ARCNET, which are low layer of BACNet. Therefore, if CAN is adopted as low layer of BACNet, the home automation system is implemented more effectively.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.3
• /
• pp.95-99
• /
• 2003

In this paper, the power system automation based on CAN communication protocol is introduced. Along with digitalization of electrical device, the various on-line services such as remote control, remote monitoring, remote parameter setting, fault data recording and remote diagnostic have been realized and become available. Therefore, it is necessary for those electrical devices to have real-time and reliable communication protocols. Author proposes DNPC(Distributed Network Protocol with CAN) which is proper to the power system SCADA (Supervisory Control And Data Acquisition) and DCS (Distributed Control System). The physical and datalink layer of DNPC protocol consists of the CAN2.0B which has the real-time characteristics and powerful error control scheme. As the transport and application layer, DNP3.0 is adopted because of its flexibility and compatible feature. Using the DNPC protocol, the power system automation is realized.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.9
• /
• pp.898-904
• /
• 2010

Unmanned autonomous forklifts have a great potential to enhance the productivity of material handling in various applications because these forklifts can pick up and deliver loads without an operator and any fixed guide. There are, however, many technical difficulties in developing such forklifts including localization, map building, sensor fusion, control and so on. Implementation, which is often neglected, is one of practical issues in developing such an autonomous device. This is because the system requires numerous sensors, actuators, and controllers that need to be connected with each other, and the number of connections grows very rapidly as the number of devices grows. Another requirement on the integration is that the system should allow changes in the system design so that modification and addition of system components can be accommodated without too much effort. This paper presents a network-based distributed approach where system components are connected to a shared CAN network, and control functions are divided into small tasks that are distributed over a number of microcontrollers with a limited computing capacity. This approach is successfully applied to develop an unmanned forklift.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.81-87
• /
• 2005

This paper addresses the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. CAN built in DSP2812 microprocessor is used to control and monitor the multi-motor system with the inverter driving system. CAN network implementation schemes and the algorithm for multi-motor control and monitoring is also developed. We configure the multi-motor control experimental system to verify the proposed algorithm and the reliability of CAN networks system in the various operation of two induction motors. The experimental results show that CAN based networked intelligent multi-motor control system using DSP2812 microprocessor can carry out the real-time network based control in various speed range and the position control of induction motors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2166-2172
• /
• 2006

This paper presents a quality-of-service-enabled next generation local area network architecture which can provide efficiently convergence services over the Internet protocol. The basic concept of the architecture is to combine such three principle technologies as programmable switched network quality-of-service resource management and Internet protocol based network convergence. We discuss system entities and technologies development, which constitute the proposed network. The architecture of the network is then described. Implementation of systems verifies the proposed technologies. The network as a next generation local area network can provide quality-of-service-enabled real-time communication services as well as existing data traffic, and the open programmable interface can facilitates to adopt cost-effectively emerging new services or functionalities.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.4
• /
• pp.21-28
• /
• 1997

Along with the rapid growth of shipping and transportation , the size of a ship larger and larger. Low speed maneuverabililty of a full ship has been received a great deal of attention concerting about the navigation safety, especially in the harbour area of waterway. And, the iperation of the full ship in harbour area is one fo tehmost difficult technique. Usually highly experienced experts can make a suitable decision considering various propeller ,rudder actions and environmental conditions. The Artificial Neural Network is applied to the automatic berthing control of a ship. The teaching data are made by the berthing simulation of a ship on the computer. And, the layer neural network is used and the 'Error Back-Propagation Algorithm' is used to teach the neural network. Finally, it is shown that the berthing control is successfully done by the established neural network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3529-3550
• /
• 2016

In heterogeneous networks (HetNets), energy saving is vital for a sustainable network development. Many techniques, such as spectrum allocation, network planning, etc., are used to improve the network energy efficiency (EE). In this paper, micro BSs utilizing cell range expansion (CRE) and spectrum allocation are considered in multi-channel heterogeneous networks to improve EE. Hotspot region is assumed to be covered by micro BSs which can ensure that the hotspot capacity is greater than the average demand of hotspot users. The expressions of network energy efficiency are derived under shared, orthogonal and hybrid subchannel allocation schemes, respectively. Particle swarm optimization (PSO) algorithm is used to solve the optimal ratio of subchannel allocation in orthogonal and hybrid schemes. Based on the results of the optimal analysis, we propose three service control strategies on the basis of large-scale user behaviors, i.e., adjust micro cell rang expansion (AmCRE), adjust micro BSs density (AmBD) and adjust micro BSs transmit power (AmBTP). Both theoretical and simulation results show that using shared subchannel allocation scheme in AmBD strategies can obtain maximal EE with a very small area ratio. Using orthogonal subchannel allocation scheme in AmCRE strategies can obtain maximal EE when area ratio is larger. Using hybrid subchannel allocation scheme in AmCRE strategies can obtain maximal EE when area ratio is large enough. No matter which service control strategy is used, orthogonal spectrum scheme can obtain the maximal hotspot user rates.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.464-474
• /
• 2004

This paper proposes a middleware structure for the module-based personal robot, which can run on heterogeneous network interfaces and provides users easy interface-method regardless of underlying heterogeneous interfaces and convenient exchange of modules. The proposed middleware is divided into three layers of a streaming layer (SL), a network adaptation layer (NAL) and a network interface layer (NIL). The streaming layer manages application transactions using middleware services and provides user a uniform interfaces to the proposed middleware. The network adaptation layer manages a message-routing and provides naming service and it is a core of the proposed middleware. And the network interfaces layer manages dependent parts of heterogeneous network interfaces such as IEEE1394, USB, Ethernet, and CAN (Control Area Network). This paper implements the proposed middleware structure, where 3 types of interfaces of IEEE 1394, USB and Ethernet are used, and measures response times among those interfaces.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.145-152
• /
• 2016

The usage of LED(Light Emitting Diode) has been rapidly increased and energy efficient management of LED light system is regarded as an important technology to enhance the energy efficiency. In this paper, we design and implementation of LED lighting controller which can control the LED lighting by using the wire and wireless communication technology based on the LAN(Local Area Network) and PAN(Personal Area Network). The implemented system can reduce the cost of LED lighting installing and avoids complicated wiring problem. And it is possible to minimize power consumption through automatic or manual LED control that they wished. In experimental results, the implemented LED lighting controller was satisfactory for all of the desired functions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.1051-1058
• /
• 2011

Unmanned autonomous forklifts have a great potential to enhance the productivity of material handling in various applications because these forklifts can pick up and deliver loads without an operator and any fixed guide. Especially, automation of pallet loading and unloading technique is useful for enhancing performance of logistics and reducing cost for automation system. There are, however, many technical difficulties in developing such forklifts including localization, map building, sensor fusion, control, and so on. This is because the system requires numerous sensors, actuators, and controllers that need to be connected with each other, and the number of connections grows very rapidly as the number of devices grows. This paper presents a vision sensorbased autonomous loading and unloading for network-based unmanned forklift where system components are connected to a shared CAN network. Functions such as image processing and control algorithm are divided into small tasks that are distributed over a number of microcontrollers with a limited computing capacity. And the experimental results show that proposed architecture can be an appropriate choice for autonomous loading in the unmanned forklift.