• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.67-73
• /
• 2019

In this study, to optimize the production and utilization of biogas for organic waste resources, the precision monitoring of on-site facilities and the energy balance by facility were analyzed, and the solutions for field problems were investigated, and the design and operation guidelines for pretreatment facilities and generators were presented. Gas pre-treatment is required to solve frequent failures and efficiency degradation in operation of high quality refining facilities, and processing processes such as desulfurization, dehumidification, deoxidization, dust treatment, volatile organic compounds, etc. Since these processes are substances that are also eliminated from the high-quality process, quantitative guidelines are not presented in the gas pretreatment process, but are suggested to operate during the processing process as a qualitative guideline. In particular, dust, siloxane, and volatile organic compounds are the main cause of frequent failure of high-quality processes if they are not removed from the gas pretreatment process. Design of the biogas high-quality process. The operation guidelines provide quality standards [Methane content (including propane) of 95% or more] with 90% or more utilization of the total gas generation, two systems, and a margin of 10% or more. It also proposed installing gas equalization tank, installing thermal automatic control system for controlling equalization of auxiliary fuel, installing dehumidification device at the back of high quality for removing moisture generated in the process of gas compression, installing heat-resisting facilities to prevent freezing of facilities in winter and reducing efficiency, and installing membrane facilities in particular.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.169-169
• /
• 2022

Over the past 100 years, the global average temperature has risen by 0.75 ℃. The Korean Peninsula has risen by 1.8 ℃, more than twice the global average. According to the RCP 8.5 scenario, the CO₂ concentration in 2100 will be 940 ppm, about twice as high as current. The National Institute of Crop Science(NICS) is using the SPAR (Soil-Plant Atmosphere Research) facility that can precisely control the environment, such as temperature, humidity, and CO₂. A Python-based colony photosynthesis algorithm has been developed, and the carbon and nitrogen absorption rate of rice is evaluated by setting climate change conditions. In this experiment, Oryza Sativa cv. Shindongjin were planted at the SPAR facility on June 10 and cultivated according to the standard cultivation method. The temperature and CO₂ settings are high temperature and high CO₂ (current temperature+4.7℃ temperature+4.7℃·CO₂ 800ppm), high temperature single condition (current temperature+4.7℃·CO₂ 400ppm) according to the RCP8.5 scenario, Current climate is set as (current temperature·CO₂400ppm). For colony photosynthesis measurement, a LI-820 CO₂ sensor was installed in each chamber for setting the CO₂ concentration and for measuring photosynthesis, respectively. The colony photosynthetic rate in the booting stage was greatest in a high temperature and CO₂ environment, and the higher the nitrogen fertilization level, the higher the colony photosynthetic rate tends to be. The amount of photosynthesis tended to decrease under high temperature. In the high temperature and high CO₂ environment, seed yields, the number of an ear, and 1000 seed weights tended to decrease compared to the current climate. The number of an ear also decreased under the high temperature. But yield tended to increase a little bit under the high temperature and high CO₂ condition than under the high temperature. In addition, In addition to this study, it seems necessary to comprehensively consider the relationship between colony photosynthetic ability, metabolite reaction, and rice yield according to climate change.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.671-678
• /
• 2009

Recently, there have been some researches in the equipment fault detection based on shock and vibration information. Most research of them is based on shock and vibration monitoring to determine the equipment fault or not. Different with engine fault detection based on shock and vibration information we focus on detection of engine for boat and system control. First, it use the duplicated-checking method for shock and vibration information to determine the engine fault or not. If there is a fault happened, we use the integral to determine the error engine shock wave width and detect the fault area. On the other hand, we use the engine trend analysis and standard of safety engine to implement the shock and vibration information database. Our simulation results show that the probability of engine fault determination is 98% and the probability of engine fault detection is 72%

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.554-557
• /
• 2016

Recently, supercomputer has been increasingly adopted as a computing environment for scientific simulation as well as education, healthcare and national defence. Especially, supercomputing system with heterogeneous computing resources is gaining resurgence of interest as a next-generation problem solving environment, allowing theoretical and/or experimental research in various fields to be free of time and spatial limits. However, traditional supercomputing services have only been handled through a simple form of command-line based console, which leads to the critical limit of accessibility and usability of heterogeneous computing resources. To address this problem, in this paper, we provide the design and implementation of web-based HPC (High Performance Computing) job management framework for computational scientific simulation. The proposed framework has highly extensible design principles, providing the abstraction interfaces of job scheduler (as well as bundle scheduler plug-ins for LoadLeveler, Sun Grid Engine, OpenPBS scheduler) in order to easily incorporate the broad spectrum of heterogeneous computing resources such as cluster, computing cloud and grid. We also present the detailed specification of HTTP standard based RESTful endpoints, which manage simulation job's life-cycles such as job creation, submission, control and status monitoring, etc., enabling various 3rd-party applications to be newly created on top of the proposed framework.

• Korean journal of applied entomology
• /
• v.61 no.3
• /
• pp.481-496
• /
• 2022

In order to establish an effective pest control strategy, we investigated the occurrence of lepidopteran insects in the major trees growing in urban forests from 2019 to 2021. In total, we recorded 76 species of 14 families in Prunus spp., 40 species of eight families in Acer spp., 43 species of 10 families in Zelkova serrata, 28 species of seven families in Rhododendron spp., and 10 species of four families in Hibiscus syriacus. Among these, Hyphantria cunea and Lymantria dispar were recorded from all five tree taxa monitored. The most frequently occurring species in the different tree groups were as follows: H. cunea and Phalera flavescens in Prunus yedoensis, Epinotia ulmicola in Z. serrata, and Rehimena surusalis in H. syriacus. H. cunea also occurred in Rhododendron spp. and Acer spp., although the numbers were lower than those recorded in Prunus spp. and Z. serrata. Our results highlight the importance of focusing on the frequency of occurrence of lepidopteran insects in Prunus spp. and Z. serrata, whereas the presence of these insects in both Acer spp. and Rhododendron spp. Appears to be less problematic. From the perspective of reducing the risks to human health, our findings indicate that the application of pheromones for monitoring lepidopteran species and the use of mating disruptors would be desirable approaches that would contribute to minimizing the spraying of pesticides in urban forests.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.527-534
• /
• 2017

The purpose of this study is to develop unmanned equipment that can automatically move to the desired point and measure water quality at the correct depth. For this purpose, we constructed a water sampling lift and water sampling container, an unmanned vessel equipped with a VRS-GPS, an acoustic echo sounder, and a water quality sensor. Also, we developed an automatic navigation algorithm and program, an automatic water sampling program, and a water quality map generation program. As a result of the experiment in the detention pond, the unmanned vessel sailed along the planned route with an accuracy of about 93% within the error range of 3m. In addition, the water quality sensor installed in the lift was able to acquire the water quality of the target area in real time and transmit it to the server via wireless Internet, and it was possible to monitor the water quality of each site in real time. Through field experiments, the water sampling lift was able to control the desired length with an accuracy of about 94%. The stretch length accuracy experiment of the water sampling lift was impossible to measure directly in the water, so it was replaced land-based experiment. We also found some unstable problems due to the weight of the water sampling lift and the weight of the air compressor to operate the water container. Except these two problems, we accomplished purpose of this study. An automated water quality measurement method using an unmanned vessel can be used to measure the quality of water in a difficult to access area and to secure the safety of the worker.

• Korean Journal of Veterinary Research
• /
• v.41 no.3
• /
• pp.421-427
• /
• 2001

This study was performed to evaluate the embolized kidney and contralateral normal kidney using computed tomography (CT) and enhanced computed tomography. Experimental hydronephrosis was induced by ligation of unilateral ureter in Beagle dogs. Renal artery embolization was performed using selective catheterization in the hydronephrotic kidney of seven dogs and EKG, $SpO_2$, body temperature, pulse, and repiratory rate were within normal ranges during procedures. Iohexol-ethanol solution was used as embolic material. There were no dogs expired after TAE-Ra and no side effects associated with regurgitation of iohexol-ehtanol solution. Revascularization of renal artery was not found in angiography in dogs treated by TAE-RA at immediately after TAE-RA and 14 days after TAE-RA. CT showed dilation of urinary collection system and ventral displacement of spleen at 14 days after TAE-RA in one dog not treated by TAE-RA and experimental group treated by TAE-Ra. CT two month after TAE-RA showed the shrunken embolized kidney in experimental group. Transverse CT with contrast enhancement demonstrated the increase of signal intensity at thinned renal cortex in control group not treated by TAE-Ra at 30 days and 60 days, however, there was no increase of signal intensity at shrunken embolized kidney at 60 days after TAE-RA. CT was useful modality for evaluation of the morphology and the size of embolized kidney and contralateral normal kidney. Enhanced CT was availabel for the detection of revascularization of renal artery after TAE-RA in dogs with hydronephrosis. It is conclued that CT is useful modality for the monitoring of the revascularization of the renal artery after TAE-RA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2689-2696
• /
• 2015

Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.

• The Journal of Society for e-Business Studies
• /
• v.9 no.3
• /
• pp.155-167
• /
• 2004

At this time, the two main techniques for achieving web personalization assistant systems generally concern direct manipulation and software agents. While both direct manipulation and software agents are intended for permitting user to complete tasks rapidly, efficiently, and easily, their methodologies are different. The central debate involving these web personalization techniques originates from the amount of control that each allows to, or holds back from, the users. Direct manipulation can provide users with comprehensibel, predictable and controllable user interfaces that give them a feeling of accomplishnent and responsibility. On the other hand, the intelligent software components, the agents, can assist users with artificial intelligence by monitoring or retrieving personal histories or behaviors. In this empirical study, two web personalization assistant systems are evaluated. One of them, WebPersonalizer, is an agent based user personalization tool; the other, AntWorld, is a collaborative recommendation tool which provides direct manipulation interfaces. Through this empirical study, we have focused on two different paradigms as web personalization assistant systems : direct manipulation and software agents. Each approach has its own advantages and disadvantages. We also provide the experimental result that is worth referring for developers of electronic commerce system and suggest the methodologies for conveniently retrieving necessary information based on their personal needs.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.183-190
• /
• 2002

A study was conducted to determine the effect of dietary probiotics or antibiotics on growth and pathological status in growing-finishing pigs. Ninety male pigs weaned at 24 days of age were divided into three groups of 30 pigs each on the basis of body weight and litter. Three groups of ten pigs(one pen) each were assigned to one of the following diets; a control diet or diets containing 0.1% probiotics or 0.1% antibiotics (1:1 mixture of kitasamycin and sulfamethazine). Average daily gain (ADG), feed efficiency(G/F) and the pathological status were monitored. ADG, feed efficiency and carcass quality were not different (P>0.05) among the three treatments. But pork quality in pigs fed probiotics tended to be improved, compared to other treatments. The pigs fed probiotics had lower pathological lesion in intestinal monitoring than that of other treatments pigs. The chemical composition of slurry(BOD, COD, SS, T-N, T-P and ammonia) in the probiotics treatments tended to be decreased, compared to other treatments. Results of this study suggest that dietary probiotics improve pigs' housing environment, and decrease the contents of polluting materials in slurry.