• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1244-1252
• /
• 2008

This paper presents the analysis results obtained by the flight test of reconfiguration flight control system for an aircraft. The reconfiguration flight control system was designed by using control allocation scheme that automatically distributes the demanded control moments determined by control law to each actual control surface. In this paper, some control allocation algorithms for reconfiguration control of general aircraft with redundant control surfaces are summarized and their performance evaluation results through nonlinear simulation and Hardware-In-the-Loop-Simulation (HILS) test are shown. Also, Unmanned Aerial Vehicle (UAV) system adopted as a platform for the flight test of reconfiguration flight controller and the implementation procedure of reconfiguration flight controller into real-time UAV system were introduced. Finally, flight test results were analyzed.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.808-813
• /
• 2003

Maintaining agility and responsiveness m designing and manufacturing activities are the key issues for manufacturing companies to cope with global competition. Distributed design and control systems are regarded as an efficient solution for agility and responsiveness. However, distributed nature of a manufacturing system complicates production activities such as design, simulation, scheduling, and execution control. Especially, existing simulation systems have limited external integration capabilities, which make it difficult to implement complex control mechanisms for the distributed manufacturing systems. Moreover, integration and coupling of heterogeneous components and models are commonly required for the simulation of complex distributed systems. In this paper, a collaborative and adaptive simulation architecture is proposed as an open framework for simulation and analysis of the distributed manufacturing enterprises. By incorporating agents with their distributed characteristics of autonomy, intelligence, and goal-driven behavior, the proposed agent-based simulation architecture can be easily adapted to support the agile and distributed manufacturing systems. The architecture supports the coordination and cooperation relations, and provides a communication middleware among the participants in simulation.

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.25-34
• /
• 2006

For decades, simulation technique has been well validated in areas such as computer and communication systems. Recently, the technique has been much used in the area of transportation and traffic forecasting. Several methods have been proposed for investigating complex traffic flows. However, the dynamics of vehicles and diversities of driver characteristics have never been considered sufficiently in these methods, although they are considered important factors in traffic flow analysis. In this paper, we propose a traffic simulation tool called Multi-Agent for Traffic Simulation with Vehicle Dynamics Model (MATDYMO). Road transport consultants, traffic engineers and urban traffic control center managers are expected to use MATDYMO to efficiently simulate traffic flow. MATDYMO has four sub systems: the road management system, the vehicle motion control system, the driver management system, and the integration control system. The road management system simulates traffic flow for various traffic environments (e.g., multi-lane roads, nodes, virtual lanes, and signals); the vehicle motion control system constructs the vehicle agent by using various vehicle dynamic models; the driver management system constructs the driver agent capable of having different driving styles; and lastly, the integrated control system regulates the MATDYMO as a whole and observes the agents running in the system. The vehicle motion control system and driver management system are described in the companion paper. An interrupted and uninterrupted flow model were simulated, and the simulation results were verified by comparing them with the results from a commercial software, TRANSYT-7F. The simulation result of the uninterrupted flow model showed that the driver agent displayed human-like behavior ranging from slow and careful driving to fast and aggressive driving. The simulation of the interrupted flow model was implemented as two cases. The first case analyzed traffic flow as the traffic signals changed at different intervals and as the turning traffic volume changed. Second case analyzed the traffic flow as the traffic signals changed at different intervals and as the road length changed. The simulation results of the interrupted flow model showed that the close relationship between traffic state change and traffic signal interval.

• 대한전기학회논문지
• /
• 제35권10호
• /
• pp.458-464
• /
• 1986

This paper introduces a method for design verification and performance evaluation of flight control system. The method is a real time hardware in the loop simulation using the hybrid computer and motion table facility. As a typical illustration, a roll control system of flight vehicle is applied. The simulation validity is demonstrated by comparing hardware test results with analog simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.34-39
• /
• 1998

This paper describes the simulation approaches employed for a vector control system of induction motor drive using SIMNON for windows program. SIMNON program tool can solve differential and difference equations for nonlinear dynamical control system. One powerful feature is its ability of allowing integration of individual program modules after each individual module is programed and tested independently. This particular feature is exploited here for an SVPWM inverter drive by real-time modeling and simulation. The suggested programs are provided a simple and complete simulation for induction motor vector drive system.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1997년도 춘계 학술대회 발표집
• /
• pp.124-127
• /
• 1997

A key element in the control of Automated Guided Vehicle Systems (AGVS) is dispatching policy. This paper proposes a new dispatching algorithm for an efficient operation of AGVS. Based on an evolutionary operation, it has an adaptive control capability responding to changes of the system environment. The performance of the algorithm is compared with some well-known dispatching rules in terms of the system throughput through simulation. Sensitivity analysis is carried out varying the buffer capacity and the number of AGVS.

• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.683-690
• /
• 1999

This paper deals with a fault-tolerant control method for robust control of RPV(Remotely Piloted Vehicle). To design the flight control system, the 6-DOF simulation program has been developed based on the dynamic model of RPV. A robust fault detection and diagnosis method proposed by Kwon et al. [8]-[10] is adopted to detect the actuator fault of RPV and to make the controller reconfiguration. The Hoo control method is applied to the flight control system. An integrated simulation for performance evaluation of the fault-tolerat\nt control system designed is performed via 6 DOF simulation and shows that the control system works even under the actuator fault.

• 한국컴퓨터정보학회논문지
• /
• 제9권4호
• /
• pp.49-54
• /
• 2004

규칙 기반 접근 제어가 신분 기반 접근 제어의 완전한 대체 방법이 아니듯이 직무 기반 접근 제어도 신분 기반 접근 제어와 규칙 기반 접근 제어의 병합이 아닌 상호 보완적인 방법이다. 본 논문에서는 기존의 접근 제어 메커니즘을 통합하여 보안성 무결성 및 흐름 제어 보안 기능을 제공하며 직무 중심 조직의 접근 제어 요구를 용이하게 수용할 수 있는 새로운 방식의 통합 접근 제어를 위한 시뮬레이션 모델을 설계하여 이를 실제의 응용 시스템에 적용할 수 있도록 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.156-159
• /
• 1996

An adaptive predictive control for steam-reforming plant which consist of a steam-gas reformer and a waste heat steam-boiler was studied by using MIMO bilinear model. The simulation experiments of the process identification were performed by using linear and bilinear models. From the simulation results it was found that the bilinear model represented the dynamic behavior of a steam-reforming plant very well. ARMA model was used in the process identification and the adaptive predictive control. To verify the performance and effectiveness of the adaptive predictive controller proposed in this study the simulation results of steam-reforming plant control based on bilinear model were compared to those of linear model. The simulation results showed that the adaptive predictive controller based on bilinear model provides better performance than those of linear model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.488-491
• /
• 1997

In this paper, a ncw control 'ialvc which can misc air-iraksge pneumatically and compensate pressure drop for an alrho~ st system uas proposed A new control valve called "Pneuniatic C70ntro1 Valve (PCV)" functions as a control valve to compcns;ltc prcssure in thc casc of air-leakage. by using the pure pneummatic control ofpilot pressure. Based on the sirnulation of the proposed PCY, thc experimental system was fabricaied su as to illustrate the efficient pcrformance of the proposed PCV with anti-leakage. Such good perfo~manccs of PCV in the air-hoist system are shown by the simulation. In addition, the simulation bascd design approach presented in this paper can be applied to any hydraulic or pneumatic-hydraulic system.