• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.3
• /
• pp.149-155
• /
• 2011

Residual stress relief by pulse magnetic treatment is attractive because the process is carried out at room temperature and magnetic fields that are easy to produce and control can be used. This study shows that strong pulse magnetic treatment can lead to stress relaxation of structural steels instead of a conventional heat treatment process. And it makes a comparative study about pulse magnetic treatment and tempering by using Larson-Miller equation. When the specimen was subjected to a pulse magnetic treatment process the residual stress in the specimen was reduced by about 13.8%. It could be compared with tempering at $200^{\circ}C$ for 2hours by using thermal effect of Larson-Miller equation. As a result, it is considered that the pulsed magnetic treatment have an effect of the stress relation by tempering at $200^{\circ}C$ for 2 hours.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.97-100
• /
• 2006

A sensor and measuring system were implemented to measure both uroflow and urophonography signal during urination for diagnose the BPH(benign prostatic hypertrophy). The implemented system was composed of the uroflow sensor using the load-cell, the urophonography measurement sensor so as stethoscope type, pre-processing part for sensors signal detection, amplifier and filter, system control parts and PC measurement program. A simulator of the lower urinary system that is experimental equipment implemented for evaluates the developed system. The two signals were measured using implemented system and analyzed these signal by means of time domain and frequency domain for extraction of the characteristic parameter which can most effectively reflected by the occlusion of the lower urinary system. Furthermore two signals were measured and analyzed with the subject of 5 healthy adult for clinical application possibility of the implemented system. As a result, the most influence bandwidth of effect according to occlusion of the lower urinary system is $253{\sim}282Hz$ of the urophonography signal.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.405-413
• /
• 2002

It is crucial that we should set proper standards capable of efficiently handling new corrections of maps, connections of edges on the maps, administrative districts, and inter-scale connections in order to make serial cadastral maps. This study drew a two dimensional Parameter using an indent point, as a Review Control Point, on forest screening line or boundary line of administrative district. The study also introduced a few different transformations such as Affine Transformation, N-Degree Polynomial Transformation, and Projective Transformation, the two dimensional transformation methods to apply them to the connection of cadastal·forestry maps and the connection of parcels between the administrative districts, on the forestry map designed by discretionary edges on the maps per district unit with parcel numbers and tried to apply the coordinates transformation method to connections of maps to make serial cadastral maps.

• Speech Sciences
• /
• v.2
• /
• pp.67-88
• /
• 1997

The aim of this study is to develop an assessment program of speech rehabilitation for children having some language and speech disorders. Patients of dysarthria, tonsillectomy, tonsilhypertrophy, and nasal obstruction were selected for this experimental clinical phonetic study. Formant variations ($F_1\;&\;F_2$) show pre- and post-operation differences in tonsillectomy and cleft palate patients. Nasal formants ($NF_1\;&\;NF_2$) show pre- and post-operation differences in nasal obstruction. The articulation reaction time (ART) as a parameter was used to assess Voice Onset Time(VOT). It was shown longer duration for hypokinetic dysarthria and shorter for atoxic dysarthria.. The diadochokinetic rate was measured by Visi-pitch. Lower diadochokinetic rate appeared to spastic and dysarthria in comparison with the control group. It was shown that the nasalance of tonsilhypertrophy, nasal obstruction, and cleft palate patients was seen to increase after operation. In addition, the assessment of nasality can be measured only by simple vowels such as /a/ and /i/.

• Journal of ILASS-Korea
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2013

Wall thinning of pipeline in power plants occurs mainly by flow acceleration corrosion (FAC), cavitation erosion (C/E), liquid droplet impingement erosion (LDIE). Wall thinning by FAC and C/E has been well investigated; however, LDIE in plant industries has rarely been studied due to the experimental difficulty of setting up a long injection of highly-pressurized air. In this study, we designed a long-term experimental system for LDIE and investigate the behavior of LDIE for three kinds of materials (A106B, SS400, A6061). The main control parameter was the air-water ratio (${\alpha}$), which was defined as the volumetric ratio of water to air (0.79, 1.00, 1.72). In order to clearly understand LDIE, the spraying velocity (${\nu}$) of liquid droplets was controled larger then 160 m/s and the experiments were performed for 15 days. Therefore, this research focuses relation between erosion rate and air-water ratio on the various pipe-flow materials. NPP(nuclear power plant)'s LDIE prediction theory and management technique were drawn from the obtained data.

• YAKHAK HOEJI
• /
• v.45 no.1
• /
• pp.39-45
• /
• 2001

The pork meat has been reported as one of the food occurring allergic reactions predominantly to korean. To identify the potential food allergens in pork meat, sera were collected from 25 allergic patients to the pork meat and 10 allergic patients not to pork meat as well as 5 normal subjects after skin prick test and open food challenge test. Crude extracts were prepared by blending raw pork meat in phosphate buffered saline (pH 7.0) and the heat treatment on crude extracts was carried to characterize sensibility of the allergens to heat. ELISA was performed to determine specific IgE antibody levels of allergic patients to pork meat, and resulted in twofold higher mean value than that of tolerated patients. Extracted proteins from pork meat was separated with SDS-PAGE followed by immunoblotting using sera from pork sensitive patients and control subjects, respectively. The IgE binding response to pork meat by immunobots correlated with quantitative specific IgE value of each person. Immunoblots showed four prominent IgE-binding bands (66, 60, 50, 44 kDa) in crude extract, but two bands of those (60, 44 kDa) were heat-labile. These results suggest that most prominent allergens from pork meat are four components(66, 60, 50, 44 kDa) in korean and the heat treatment on allergen is additional parameter to characterize allergen.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.24-32
• /
• 2008

This paper discussed the Feasibility study of wind power generation considering the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind speed, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was almost the same at wind power plants installed in southwestern coastal areas where wind speed was low as at those installed in mountain areas in Gangwondo where wind speed was high. This demonstrates that the shape parameter of wind distribution is low due to the characteristics of mountain areas, and the standard deviation of wind speed is large due to the effect of mountain winds, therefore, actual generation compared to southwestern coastal areas is almost similar in mountain areas even though wind speed is high.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.278-281
• /
• 2009

Selective laser sintering(SLS), a kind of rapid prototyping technology, can provide a process to form many types of coatings. Coated layers by selective laser melting are highly influenced by substrate, powder and laser parameters such as laser power, scan rate, fill spacing and layer thickness. Therefore an attempt to fabricate Fe-Ni-Cr coating on AISI H13 tool steel has been performed by selective laser sintering. In this study, Fe-Ni-Cr coating was produced by experimental facilities consisting of a 200W fiber laser which can be focused to 0.08mm and atmospheric chamber which can control atmospheric pressure with Ar. With power increase or energy density decrease, line width was decreased and line surface quality was improved with energy density increase. Surface quality of coating layer was improved with fill spacing optimization or layer thickness decrease.

• Journal of Welding and Joining
• /
• v.14 no.4
• /
• pp.33-42
• /
• 1996

In recent years there has been a significant growth in the use of the automated and/or robotic welding system, carried out as a means of improving productivity and quality, reducing product costs and removing the operator from tedious and potentially hazardous environments. One of the major difficulties with the automated and/or robotic welding process is the inherent lack of mathematical models for determination of suitable welding process parameters. Partial-penetration, single-pass bead-on-plate welds were fabricated in 12mm AS 1204 mild steel flats employing five different welding process parameters. The experimental results were used to develop three empirical equations: curvilinear; polynomial; and linear equations. The results were also employed to find the best mathematical equation under weld bend width to assist in the process control algorithms for the Gas Metal Arc Welding(GMAW) process and to correlate welding process parameters with weld bead width of bead-on-plates deposited. With the help of a standard statistical package program. SAS, multipe regression analysis was undertaken for investigating and modeling the GMAW process, and significance test techniques were applied for the interpretation of the experimental data.

• Korean Journal of Veterinary Research
• /
• v.57 no.1
• /
• pp.43-45
• /
• 2017

This study investigated changes in certain blood parameters in calves and pigs after foot-and-mouth disease (FMD) vaccination. In this study, five calves and five pigs were selected from groups of 10 calves and pigs, respectively, and were vaccinated with an FMD vaccine. The remaining animals formed two non-treatment control groups. Blood samples were collected from all animals on the 1st, 3rd, 5th, and 7th days post-vaccination. In the FMD-vaccinated calves and pigs on day 7 post-vaccination, white blood cell counts, blood urea nitrogen levels, and alanine aminotransferase and aspartate aminotransferase activities were higher than those in the respective controls. The present data suggested that the certain hemato-biochemical parameters on cattle and pigs were meaningfully changed between before and after FMD vaccination.