• KSTLE International Journal
• /
• 제1권2호
• /
• pp.76-82
• /
• 2000

Turbulence in journal bearing operation is examined and the thermal variability is studied for isothermal, convective and adiabatic conditions on the walls under aligned and misaligned conditions. Also, the effects of a contraction ratio at the cavitation region and the mixing between re-circulating oil and inlet oil on the fluid field of oil film are included. An algorithm for the solution of the coupled turbulent Reynolds and energy equations is used to examine the effects of the various factors. Heat convection is found to play only a small role in determining friction and load under no mixing condition. However, under realistic mixing condition, the heat convection cannot be ignored. The wall temperature and heat transfer have been found to be of secondary important factors to the mixing effectiveness at the groove and the final mixture temperature.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.535-538
• /
• 2006

The Objective of this study is to document the three-dimensional flow in a turbine cascade with Contoured endwall in terms of Stanton number distribution to proposes an appropriate contraction ratio of endwall contouring which show the best performance. This study was numerically performed. The results show that heat transfer coefficient on the contoured endwall which has the height of 15% of the axial chord showed best performance. The numerical method and results in this study can be applied to the design of gas turbine cascade with high performance.

• Structural Engineering and Mechanics
• /
• 제19권6호
• /
• pp.707-720
• /
• 2005

The bending stress formula that taking into account the transverse deformation is developed for plane-curved, untwisted isotropic beams subjected to loadings that result in deformations in the plane of curvature. In order to account the transverse Poisson contraction effect, a new constitutive relation between force resultants, moment resultants, mid-plane strains and deformed curvatures for a curved plate is derived in a $6{\times}6$ matrix form. This constitutive relation will provide the fundamental basis to the analyses of curved structures composing of isotropic or anisotropic materials. Then, the bending stress formula of a curved isotropic beam can be deduced from this newly developed curved plate theory. The stress predictions by the present analysis are compared to those by the analysis that neglected the Poisson contraction effect. The results show that the Poisson effect becomes more significant as the Poisson ratio and the curvature are getting larger.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.197-199
• /
• 2004

In this paper, we studied a accuracy for CT using elastic epoxy. According to industry development, the quality where also the electric material is various is demanded. Insulation material is widely used because epoxy is superior to electrical and mechanical property. Until now, the possibility where the crack will occur is high because epoxy used to electrical products had high hardness. If thermal expansion is different of two material, contraction of epoxy heavily transformed turns ratio of CT. Elastic epoxy absorbed in expansion and contraction of substance material by temperature. So we could design more exacted CT. We had elastic test of elastic epoxy and made CT using elastic epoxy. At the result, We obtained turns ratio of within 4% superior to existing CT.

• Korean Journal of Hydrosciences
• /
• 제8권
• /
• pp.19-30
• /
• 1997

The hydraulics of flow within the covered reach of urban streams is very complicated due to the accumulation and interference effect of eddies around the multipli piers supporting the covering slab. An extensive experimental study is done to quantitatively estimate the backwater rise effect caused by various arrays of multiple piers. The factors governing the backwater rise are found out to be the contraction ratio due to the piers. Foude number of the flow, longitudinal pier spacing, and the length of the covered reach. For a single section of lateral pier arralyzed and a multiple regression equation derived. The effect of multiple piers, arrayed in both lateral and longitudinal directions. on the backwater rise is analyzed in terms of the contraction ratio. Froude number, longitudinal pier spacing and the total length of the covered reach. A multiple regression equation for the backwater rise estimation is proposed based on the experimental data collected in this study.

• 대한물리의학회지
• /
• 제7권3호
• /
• pp.275-282
• /
• 2012

Purpose : Bridge exercise has been commonly used in clinical rehabilitation settings to improve trunk control, and hip adductor muscles were a related muscle that may affect trunk muscle activation. The aim of this study was to investigate whether the co-contraction of hip adductor muscles may affect trunk muscle activation during bridge exercises. Methods : Thirty-eight healthy young subjects (19 men and 19 women) performed bridge exercises (with and without hip adduction movement). Surface electromyography (EMG) data were collected from the dominant-side internal oblique (IO), rectus abdominis (RA), multifidus (MF) and erect spine (ES) during bridge exercises to compare trunk muscles activation patterns. Result : The EMG activities of IO and RA appeared to be significantly higher during bridge exercise with hip adductor co-contraction than during bridge exercise alone (p<.01), but there were no significant differences in those of MF and ES. Furthermore, there were significant differences in the IO:RA EMG ratio during bridge exercise with hip adductor co-contraction (p<.05). Conclusion : These findings suggest that integration of hip adduction during bridge exercise may be beneficial in increasing deep muscles' activity for trunk stabilization.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.931-937
• /
• 2018

봉합사는 단순한 접합용로 뿐만 아니라 한방, 미용 심지어 성형 분야에도 사용하고 있다. 특히 미용 성형 분야에 인기를 끌고 있다. 본 논문에서는 기존에 많이 사용했던 PDO 봉합사보다 강도 더 좋은 PCL 및 PLLA 봉합사를 제조하였다. 이들의 수축 특성을 알기 위해 PCL 및 PLLA 봉합사의 수축률, 인장강도 및 연신율을 측정하였다. 또한 직경 및 표면을 보기 위해 SEM을 분석하였다. 수축률은 온도 상관없이 일정기간 지나면 안정화 되다. 또한 온도 높을수록 수축 증가율이 높아진다는 것을 확인할 수 있다. 그리고 유리온도의 전후 온도에 따른 기계적 특성의 변화율이 다르게 나타나는 것을 확인할 수 있다. 또한 온도 높을수록 분자운동 더 빨라지고 인장강도 낮아진다. PCL 및 PLLA 봉합사의 직경은 봉합사의 수축률과 상반관계로 나타나는 것을 확인할 수 있다. 그리고 PLLA 봉합사의 멸균온도는 $45^{\circ}C$로 설정하고 PCL 봉합사의 멸균온도는 $35^{\circ}C$로 설정하는 것이 가장 적절하다고 사료된다.

• 물과 미래
• /
• 제29권3호
• /
• pp.143-152
• /
• 1996

도시하천의 복개구간내 흐름의 수리는 복개슬라브를 지지하는 말뚝군 주위에 발생하는 과류의 중첩 및 간섭효과 때문에 대단히 복잡하다. 본 연구에서는 말뚝군의 여러 가지 배치에 따른 배수위 상승효과를 정량적으로 산정하기 위한 방법을 제안하기 위해 광범위한 실험적 연구를 수행하였다. 배수위 상승을 지배하는 인자로는 말뚝군으로 인한 흐름단면의 축소율과 흐름의 Froude 수, 흐름 방향으로의 말뚝군 간격, 복개구간의 총길이 등으로 밝혀졌다. 흐름방향에 직각인 방향으로 교각을 설치한 경우 단면 축소율과 흐름의 Froude수가 배수위 상승에 미치는 영향을 분석하였으며 배수위 상승량의 산정을 위한 다중회귀분석식을 도출하였다. 흐름의 횡방향 및 종방항으로 배치시킨 말뚝군이 배수위 상승에 미치는 영향도 단면 축소율, 흐름의 Froude 수, 흐름방향의 말뚝간 간격 및 복개구간의 총길이 등의 항으로 분석하였으며, 실험자료의 다중회귀분석에 의해 이들 영향인자를 사용하여 배수위 상승률을 산정할 수 있는 경험식을 도출, 제안하였다.

• PNF and Movement
• /
• 제21권2호
• /
• pp.243-253
• /
• 2023

Purpose: This study aimed to investigate the effects of an abdominal drawing-in maneuver (ADIM) with a light load while sitting on transverse abdominis contraction in subjects with and without low back pain. Methods: In this study, 20 participants with chronic low back pain and 20 controls participated. Ultrasonography was used to assess the thickness of the external oblique (EO), internal oblique (IO), and transversus abdominis (TrA) muscles. Muscle thickness was measured at rest and during ADIM in three different sitting postures: (1) just sitting, (2) sitting loaded position (holding a 1 or 2 kg dumbbell in each hand), and (3) sitting loaded shoulder flexion position (holding a 1 or 2 kg dumbbell in each hand). Results: The contraction ratio (CR) and preferential activation ratio (PAR) of the TrA during ADIM had no significant interactional effect between the group and the sitting postures. However, the CR and PRA of the TrA during the ADIM showed significant differences among the three different sitting postures. The CR of the TrA during the ADIM in the sitting loaded shoulder flexion position was significantly increased compared to that in the sitting position (p<0.05). Moreover, the PRA of the TrA muscle during ADIM in sitting loaded and sitting loaded shoulder flexion positions was significantly higher than that in the sitting position (p<0.05). Conclusion: The findings suggest that ADIM in the sitting-loaded shoulder flexion position should be implemented to facilitate TrA activity.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1790-1800
• /
• 2005

The examination on the operating mechanism of a pulsating heat pipe (PHP) using visualization revealed that the working fluid in the PHP oscillated to the axial direction by the contraction and expansion of vapor plugs. This contraction and expansion is due to the formation and extinction of bubbles in the evaporating and condensing section, respectively. In this paper, a theoretical model of PHP was presented. The theoretical model was based on the separated flow model with two liquid slugs and three vapor plugs. The results show that the diameter, surface tension and charge ratio of working fluid have significant effects on the performance of the PHP. The following conclusions were obtained. The periodic oscillations of liquid slugs and vapor plugs were obtained under specified parameters. When the hydraulic diameter of the PHP was increased to d=3mm, the frequency of oscillation decreased. By increasing the charging ratio from 40 to 60 by volume ratio, the pressure difference between the evaporating section and condensing section increased, the amplitude of oscillation reduced, and the oscillation frequency decreased. The working fluid with higher surface tension resulted in an increase in the amplitude and frequency of oscillation. Also the average temperature of vapor plugs decreased.