• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.366-376
• /
• 2014

Purpose: In the process of anaerobic digestion, stirring of the digester and feeding of organic waste into the digester have been considered important factors for digestive efficiency. The objective of this study was to determine the most appropriate conditions for both stirring interval of the digester and organic feeding frequency in order to improve anaerobic digestion performance. Methods: A 5-L anaerobic digester was used to conduct continuous batch tests to process swine manure and food waste. Four different stirring intervals of the digester were used: 5 min/h, 10 min/2 h, 15 min/3 h, and 20 min/4 h. Results: The application of swine manure to the digester every 5 min/h resulted in the highest production of biogas as well as the highest removal rates of volatile solids (VS) and total chemical oxygen demand. Stirring the digester with a mixture of swine manure and food waste at intervals of 5min/h and 10min/2 h produced the highest biogas yields of 515.3 mL/gVS and 521.1 mL/gVS, respectively. To test different supply frequencies, organic waste was added to the digester in either a 12-hor 24-h cycle. The 24-h cycle produced 1.5-fold greater biogas production than that during the 12-h cycle. Conclusions: Thus, from the above results, to optimize anaerobic digestion performance, the ideal stirring condition must be 5min/h for swine manure feeding and 10min/2h for co-digestion of food waste and swine manure in a 24-h cycle.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.373-375
• /
• 2002

4D CT is a dynamic volume imaging system of moving organs with an image quality comparable to conventional CT, and is realized with continuous and high-speed cone-beam CT. In order to realize 4D CT, we have developed a novel 2D detector on the basis of the present CT technology, and mounted it on the gantry frame of the state-of-the-art CT-scanner. In the present report we describe the design of the first model of 4D CT-scanner as well as the early results of performance test. The x-ray detector for the 4D CT-scanner is a discrete pixel detector in which pixel data are measured by an independent detector element. The numbers of elements are 912 (channels) ${\times}$ 256 (segments) and the element size is approximately 1mm ${\times}$ 1mm. Data sampling rate is 900views(frames)/sec, and dynamic range of A/D converter is 16bits. The rotation speed of the gantry is l.0sec/rotation. Data transfer system between rotating and stationary parts in the gantry consists of laser diode and photodiode pairs, and achieves net transfer speed of 5Gbps. Volume data of 512${\times}$512${\times}$256 voxels are reconstructed with FDK algorithm by parallel use of 128 microprocessors. Normal volunteers and several phantoms were scanned with the scanner to demonstrate high image quality.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.107-114
• /
• 2017

Pseudo capacitors belong to one group of super capacitors which are consisted with non carbon based electrodes. As such, conducting polymers and metal oxide materials have been employed for pseudo capacitors. Conducting polymer based pseudo capacitors have received a great attention due to their interesting features such as flexibility, low cost and ease of synthesis. Much work has been done using liquid electrolytes for those pseudo capacitors but has undergone various drawbacks. It has now been realized the use of solid polymer electrolytes as an alternative. Among them gel polymer electrolytes (GPEs) are in a key place due to their high ambient temperature conductivities as well as suitable mechanical properties. In this study, composition of a polyacrylonitrile (PAN) based GPE was optimized and it was employed as the electrolyte in a pseudo capacitor having polypyrrole (PPy) electrodes. GPE was prepared using ethylene carbonate (EC), propylene carbonate (PC), sodium thiocyanate (NaSCN) and PAN as starting materials. The maximum room temperature conductivity of the GPE was $1.92{\times}10^{-3}Scm^{-1}$ for the composition 202.5 PAN : 500 EC : 500 PC : 35 NaSCN (by weight). Performance of the pseudo capacitor was investigated using Cyclic Voltammetry technique, Electrochemical Impedance Spectroscopy (EIS) technique and Continuous Charge Discharge (GCD) test. The single electrode specific capacity (Cs) was found out to be 174.31 F/g using Cyclic Voltammetry technique at the scan rate of 10 mV/s and within the potential window -1.2 V to 1.2 V. The same value obtained using EIS was about 84 F/g. The discharge capacity ($C_d$) was 69.8 F/g. The capacity fade over 1000 cycles was rather a low value of 4%. The results proved the suitability of the pseudo capacitor for improving the performance further.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.13-18
• /
• 1994

Sapwood samples of pitch pine were treated with disodium octaborate alone by dip-diffusion, or in combination with water-repellent preservative(WRP) and methyl metacrylate(MMA). Treated samples were subjected to an accelerated leaching test for determining the improvement of leaching resistance and to soft rot and mold tests for evaluating the increase in bioefficacy, due to the addition of WRP and MMA applied as a second treatment. The addition of WRP and MMA retarded leaching of boron to some extent from treated samples and this retardation can be explained by improved water repellency of WRP and MMA treated samples. Borate /WRP and borate /MMA systems will not qualify borate treated wood for ground and fresh water contact use but may improve performance of borate treated wood in above-ground applications not subjected to continuous wetting conditions. Bioefficacy against soft rot fungi and mold fungi was improved by a second treatment with WRP. However, improvement in the performance of borate /MMA systems was not observed. Considering improvement in both resistance of leaching and bioefficacy against micro fungi by the treatment of WRP and MMA, simultaneously, the dual treatment of borate treated wood by MMA containing co-biocides might be believed as an ideal treatment system.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.521-528
• /
• 2021

진공 압출성형 방법에 의하여 생산되는 섬유 시멘트 복합체는 연속 생산이 가능하고 고밀도 무기질 재료의 구성이 가능한 제품이다. 보강섬유로 사용하고 있는 폴리프로필렌과 펄프의 연소에 따른 가스의 발생과 이로 인하여 불연성능 시험 중 중심부에 지속적으로 불꽃이 발생하여 성능을 충족하지 못하는 경우가 발생한다. 본 연구에서는 불연 특성 개선을 위하여 내알칼리 성능을 개선한 ARG(Alkali resistant glass)섬유를 보강섬유로 사용하여 시험체를 제조하고 성능 평가를 실시하였다. 섬유량은 부피비를 기준으로 하여 적용하였다. 측정결과 폴리프로필렌을 전량 유리섬유로 대체하고 펄프 사용량을 50% 감소하여 배합할 경우 불꽃은 발생하지 않거나 5초 이내 소화 되는 것을 확인하였다. 패널의 압출성과 생산성, 그리고 경화 후 적정한 인성 및 취성재료의 개선을 위하여 펄프 사용량은 기존 사용량의 50%를 유지하는 것이 바람직하며, 불연성능의 개선을 위하여 별도의 결합재 변경은 필요하지 않은 것으로 확인되었다.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.42-48
• /
• 2021

최근 4차산업혁명을 통해 융합 기술이 발달하면서, 국방 분야에서도 이러한 흐름을 바탕으로 무기체계의 첨단화, 고도화 등을 모색하고 있다. 하지만 첨단 기술을 바탕으로 개발되는 무기체계의 성능시험은 여러 변수들이 존재하며, 실제 운용환경에서 시험을 수행하기에 많은 어려움이 따른다. 이러한 문제점을 극복하기 위한 방안으로 M&S 자원을 적극 활용하여 그 성능을 입증하고 있으나, 사용 중인 M&S 자원의 신뢰성을 보증할 수 있는 수단을 추가로 요구하고 있다. 이에 따라 위한 VV&A 업무 수행을 통해 M&S 자원의 신뢰성을 확보하고 있다. VV&A 업무의 지속적인 요구와 수행으로 인해 관련 제도 등은 많은 발전이 이루어졌지만, 업무 수행을 위한 도구나 기법 등은 제도에 맞추어 발전하지 못하여 업무 수행에 있어 비효율적인 부분이 존재하며, 체계적인 시스템의 부재로 인하여 보안 등 여러 안전사고가 발생할 수 있는 위험성을 다수 내포하고 있다. 본 논문에서는 수행중인 국방M&S VV&A 업무의 문제점 분석을 통해 보다 효율적이고 안전한 방법을 모색하고, 이를 기반으로 업무의 발전방향을 제시하고자 한다.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.553-559
• /
• 2022

본 논문에서는 cascode GaN FET의 하프 브릿지 구성에서 오실레이션 억제를 위한 RC 스너버 회로 설계 기술을 분석한다. 대표적인 WBG 소자인 cascode GaN FET는 우수한 고속 스위칭 특성이 우수하다. 다만, 이러한 고속 스위칭 특성으로 인하여 false turn-off 문제가 야기되며, 이를 억제하기 위해 RC 스너버 회로가 필수적이다. 따라서, 일반적으로 많이 사용되는 실험 기반의 선정 기법과 근궤적법을 이용한 분석 기법을 비교한다. 일반적인 방법의 경우 실험적 경험을 바탕으로 오실레이션 억제 성능이 만족될 때까지 지속적인 회로 변경이 필요하다. 하지만, 근궤적 기법의 경우 비진동 R-C 맵을 기반으로 초기값을 설정 할 수 있다. 이러한 설계 기술에 따른 성능을 비교하기 위해 모의실험과 실제 더블 펄스 회로 구성을 통한 실험을 진행하였다.

• 한국안전학회지
• /
• 제37권5호
• /
• pp.80-88
• /
• 2022

The Korean nuclear industry had developed the SPACE (Safety and Performance Analysis Code for nuclear power plants) code, which adopts a two-fluid, three-field model that is comprised of gas, continuous liquid and droplet fields and has the capability to simulate three-dimensional models. According to the revised law by the Nuclear Safety and Security Commission (NSSC) in Korea, the multiple failure accidents that must be considered for the accident management plan of a nuclear power plant was determined based on the lessons learned from the Fukushima accident. Generally, to improve the reliability of the calculation results of a safety analysis code, verification is required for the separate and integral effect experiments. Therefore, the goal of this work is to verify the calculation capability of the SPACE code for multiple failure accidents. For this purpose, an experiment was conducted to simulate a Control Element Drive Mechanism (CEDM) break with a safety injection failure using the ATLAS test facility, which is operated by Korea Atomic Energy Research Institute (KAERI). This experiment focused on the comparison between the experiment results and code calculation results to verify the performance of the SPACE code. The results of the overall system transient response using the SPACE code showed similar trends with the experimental results for parameters such as the system pressure, mass flow rate, and collapsed water level in component. In conclusion, it can be concluded that the SPACE code has sufficient capability to simulate a CEDM break with a safety injection failure accident.

• 대한치위생과학회지
• /
• 제5권1호
• /
• pp.39-45
• /
• 2022

Background: Dental hygienists undergo 3 or 4 years of college education, and dental hygienist education must receive continuous feedback through evaluation. The purpose of this study was to compare the educational performance of students from the Department of Dental Hygiene in 2018 with those from other departments in the healthcare field. Methods: We used data from the National Assessment of Student Engagement in Learning, conducted by the Korean Educational Development Institute in 2018. The survey data of 55 dental hygiene students and 60 healthcare students at K University were provided after excluding all identifying information. An independent t-test was used for comparisons between the Department of Dental Hygiene and other healthcare departments. Results: Regarding class-related activities, dental hygiene students were passive in presentations, discussions, and projects and had significantly lower grades in cooperative learning and challenging learning. Regarding extra-class activities, dental hygiene students had significantly lower global learning and external experiences, domestic experiences, club activities, and interactions with professors. Regarding learning outcomes, students had significantly lower grades in writing, speaking, critical and analytical thinking, data evaluation, understanding of data meaning, problem-solving ability, goal setting and execution, core content extraction, human and material resource utilization, creative convergence thinking, statistical understanding and analysis, information technology use, collaboration, sense of community, stress management, time management, and foreign language proficiency. Conclusions: Dental hygiene education requires innovation in educational methods and efforts of instructors to improve poor learning activities and outcomes.

• 수산해양기술연구
• /
• 제58권2호
• /
• pp.153-158
• /
• 2022

A telesounder is a device that can monitor the appearance of fish in the sea on land and store fish detection data. This study was conducted to monitor the appearance of fish resources in coastal or near seas by using LTE communication for data transmission of the telesounder. The purpose of this study was to develop a prototype telesounder that can monitor the appearance of fish groups in the waters about 50 km away from the coast and store fish detection data. In this study, the prototype telesounder including a fish finder, communication device and battery for stable operation at sea was developed. The stability of telesounder buoy, data transmission/reception and expected use time were investigated. The expected use time of the telesounder using LTE communication with a lithium battery (12 V, 120 Ah) was about 274 hours under the conditions of 10 minutes off and 10 minutes on, about 520 hours under the conditions of 30 minutes off and 10 minutes on, and about 142 hours under continuous conditions. As a result of the sea test, it was found that the telesounder can be used in the sea area moved about 34 km from the land and the telesounder buoy was evaluated to have secured basic stability (buoyancy balance, waterproof, antenna strength, etc.) for operation in a marine environment.