• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권2호
• /
• pp.846-864
• /
• 2017

Software Defined Network (SDN) realizes management and control over the underlying forwarding device, along with acquisition and analysis of network topology and flow characters through south bridge protocol. Data path Identification (DPID) is the unique identity for managing the underlying device, so forged DPID can be used to attack the link of underlying forwarding devices, as well as carry out DoS over the upper-level controller. This paper proposes a dynamic defense method based on Client-Puzzle model, in which the controller achieves dynamic management over requests from forwarding devices through generating questions with multi-level difficulty. This method can rapidly reduce network load, and at the same time separate attack flow from legal flow, enabling the controller to provide continuous service for legal visit. We conduct experiments on open-source SDN controllers like Fluid and Ryu, the result of which verifies feasibility of this defense method. The experimental result also shows that when cost of controller and forwarding device increases by about 2%-5%, the cost of attacker's CPU increases by near 90%, which greatly raises the attack difficulty for attackers.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.58-67
• /
• 2003

Welding characteristics of austienite 304 stainless and SM45C using a continuous wave Nd:YAG laser n experimentally investigated Laser beam welding is increasingly being used in welding of structural steels. The laser welding process is one of the most advanced manufacturing technologies owing to its high speed and deep penetration. The thermal cycles associated with laser welding are generally much Inter than those involved in conventional welding processes, leading to a rather small weld zone. Experiments are performed for 304 stainless steel plates changing several process parameter such as laser power, welding speed, shielding gas flow rate, presence of surface pollution, with fixed or variable gap and misalignment between the similar and dissimilar and plates, etc. The Nd:YAG laser welding process is one of the most advanced manufacturing technologies owing to its high speed and penetration. This paper describes the weld ability of SM45C carbon steel for machine structural use by Nd:YAG laser. The follow conclusions can be drawn that laser power and welding speed have a pronounced effect on size and shape of the fusion zone. Increase in welding speed resulted in an increase in weld depth/aspect ratio and hence a decrease in the fusion zone size. The penetration depth increased with the increase in laser power.

• Advances in environmental research
• /
• 제4권2호
• /
• pp.105-117
• /
• 2015

The groundwater is a very important part of the environment and must be protected for the benefit of the present and future generation. The contamination of soil and groundwater by chemicals has become an increasing concern in the recent past. These chemicals enter the groundwater system by a wide variety of mechanisms, including accidental spills, land disposal of domestic and industrial wastes and application of agricultural fertilizers. Once introduced into an aquifer, these contaminants will be transported by flowing groundwater and may degrade water quality at nearby wells and streams. For improving the management and protection of groundwater resources, it is important to first understand the various processes that control the transport of contaminants in groundwater. Predictions of the fate of groundwater contaminants can be made to assess the effect of these chemicals on local water resources and to evaluate the effectiveness of remedial actions. In this study, an attempt has been made to investigate the behaviour of solute transport through porous media using laboratory experiments. Sodium chloride was used as a conservative chemical in the experiment. During the experiment, pulse boundary condition and continuous boundary conditions were used. Experimental results have been presented for conservative solute transport in the sand. The pattern of the break through curve remains almost same in all the cases of varying flow rate and initial concentration of conservative chemical.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1154-1159
• /
• 2004

Laser beam welding is increasingly being used in welding of structural steels. The laser welding process is one of the most advanced manufacturing technologies owing to its high speed and deep penetration. The thermal cycles associated with laser welding are generally much faster than those involved in conventional arc welding processes, leading to a rather small weld zone. Experiments are performed for Inconel 600 plates changing several process parameter such as laser power, welding speed, shielding gas flow rate, presence of surface pollution, with fixed or variable gap and misalignment between plate and plate, etc. The follow conclusions can be drawn that laser power and welding speed have a pronounced effect on size and shape of the fusion zone. Increase in welding speed resulted in an increase in weld depth/ aspect ratio and hence a decrease in the fusion zone size. The penetration depth increased with the increase in laser power . Welding characteristics of austienite Inconel 600 using a continuous wave Nd:YAG laser are experimentally investigated. This paper describes the weld ability of inconel 600 for machine structural use by Nd:YAG laser.

• 한국추진공학회지
• /
• 제25권2호
• /
• pp.1-11
• /
• 2021

연소기 내부의 공동은 낮은 속도의 재순환영역과 유동의 진동을 일으켜 연료와 공기의 혼합 효율을 증대시키고, 화염을 유지함으로써 지속적인 연소를 가능하게 한다. 본 연구에서는 공동의 형상 인자에 따른 내부 유동의 특성을 실험과 2차원 전산해석을 통해 관찰하였다. 초음속 연소기 내 유동은 단순히 L/D 이외에도 다양한 공동 형상인자에 따라 크게 영향을 받는 것이 관찰되었다. 동일 L/D에서도 공동의 깊이에 따라 open과 closed 형태가 나타남을 확인하였고, 공동의 후방 경사각, 연소기 높이도 유동 특성이 달라지며, 이는 전압력 손실에 큰 영향을 미치는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2311-2320
• /
• 2022

The main outcomes of the experiments H2P6 performed in the thermal-hydraulics large-scale PANDA facility at PSI in the frame of the OECD/NEA HYMERES-2 project are presented in this article. The experiments of the H2P6 series consists of two PANDA tests characterized by the activation of three (H2P6_1) or one (H2P6_2) cooler(s) in an initially stratified and pressurized containment atmosphere. The initial stratification is defined by a helium-rich region located in the upper part of the vessel and a steam/air atmosphere in the lower part. The activation of the cooler(s) results i) in the condensation of the steam in the vicinity of the cooler(s), ii) the corresponding activation of large scale natural circulation currents in the vessel atmosphere, with the result of iii) the re-distribution and mixing of the Helium stratification initially located in the upper half of the vessel and iv) the continuous pressure decay. The initial helium layer represents hydrogen generated in a postulated severe accident. The main question to be answered by the experiments is whether or not the interaction of the different, localized cooler units would be important for the application of numerical methods. The paper describes the initial and boundary conditions and the experimental results of the H2P6 series with the suggestion of simple scaling laws for both experiments in terms of i) the temperature difference(s) across the cooler(s), ii) the transient steam and helium content and iii) the pressure decay in the vessel. The outcomes of this scaling indicate that the interaction between separate, closely localized units does not play a prominent role for the present experiments. It is therefore reasonable to model several units as one large component with equivalent heat transfer area and total water flow rate.

• Korean Chemical Engineering Research
• /
• 제54권1호
• /
• pp.101-107
• /
• 2016

본 연구에서는 $CO_2$를 이용한 알칼리폐수의 중화처리 시 jet loop reactor의 적용가능성을 검토하고자 하였다. 이를 위해 연속식 jet loop reactor에서 pH=10.1인 알칼리 폐수의 유입유량($Q_{L,in}=0.9{\sim}6.6L/min$)과 유입가스유량($Q_{G,in}=1{\sim}6L/min$)을 변화시키면서 유출수의 pH 변화 및 $CO_2$ 제거특성을 살펴보았다. 중화반응 후 유출수의 pH는 $Q_{L,in}/Q_{G,in}$ 비가 1.1일 때는 $Q_{G,in}$ 및 $Q_{L,in}$이 증가하여도 pH가 7.2 정도로 일정하게 유지되었다. 그러나 $Q_{L,in}/Q_{G,in}$ 비가 1.1 이상에서는 $Q_{L,in}/Q_{G,in}$ 비가 증가할수록 $CO_2$ 제거효율 및 배출수의 pH가 증가하는 경향을 보였다. 본 연구범위에서 얻어진 최대 $CO_2$ 제거효율은 98.06%로 $Q_{G,in}=2L/min$, $Q_{L,in}=4L/min$인 조건이었으며, 이때의 유출수 pH는 8.43 이었다.

• 대한토목학회논문집
• /
• 제32권1B호
• /
• pp.79-84
• /
• 2012

질산성질소는 일반적인 지하수 오염물질로서, 본 연구에서는 영가철을 충진한 복극전해조를 이용하여 서로 다른 조건에서 질산성질소 제거실험을 수행하였다. 실험에 사용된 전해조에는 양쪽 끝에 위치한 주 전극 사이에 전도체로서 영가철이, 비전도체로서 규사가 혼합하여 충진되었다. 모의폐수(오염된 지하수를 모사하였으며 초기 질산성질소 농도 약 30 mg/L, 전기전도도 약 300 ${\mu}S/cm$)를 이용한 연속식 실험에서 인가전압 600 V, 유입유량 20 mL/min으로 최대 99% 이상의 질산성질소를 제거하였다. 최적 혼합비 및 최적 유입유량은 각각 1:1~2:1(규사:영가철), 30 mL/min으로 결정하였다. 질산성질소의 주입농도에 따라 유출수의 pH가 비례적으로 거동하였으며, 질산성질소 환원의 최종산물로서 약 60% 정도가 암모니아로 유출되었다. 실험이 끝난 후 영가철 표면에서의 산화철은 대부분 magnetite형태로 존재하였다.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3022-3029
• /
• 2015

본 연구에서는 물과 비 혼합 비 공비 물질을 작동 유체로 사용하는 가시화 실험 장치를 제작하여 열유속을 증가시키며 시간에 따른 벽면온도 특성과 내부 유동를 카메라로 연속 촬영하며 2유체 열사이폰의 내부의 유동 및 열전달 특성에 대하여 가시적 방법으로 실험을 수행하여 실험 결과로부터 다음과 같은 결론을 얻을 수 있었다. 물과 FC40을 사용한 비 혼합 2유체 열사이폰은 열유속의 크기에 따라 자연대류, 펄스비등, 연속비등의 세가지 영역으로 구분 되었으며 비등은 증기압이 낮은 물에서 발생하였다. 자연대류에서는 액체 풀에서 물의 증발과 대류 액막 유동이 발생하였다. 액체 풀에서 비등이 발생할 때에는 강한 비등에 의하여 FC40과 물의 혼합된 상태로 전 영역에 걸쳐 기-액 이상 유동이 발생하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권3호
• /
• pp.35-48
• /
• 2016

A micromodel was applied to estimate the effects of geological conditions and injection methods on displacement of resident porewater by injecting scCO₂ in the pore scale. Binary images from image analysis were used to distinguish scCO₂-filled-pores from other pore structure. CO₂ flooding followed by porewater displacement, fingering migration, preferential flow and bypassing were observed during scCO₂ injection experiments. Effects of pressure, temperature, salinity, flow rate, and injection methods on storage efficiency in micromodels were represented and examined in terms of areal displacement efficiency. The measurements revealed that the areal displacement efficiency at equilibrium decreases as the salinity increases, whereas it increases as the pressure and temperature increases. It may result from that the overburden pressure and porewater salinity can affect the CO₂ solubility in water and the hydrophilicity of silica surfaces, while the neighboring temperature has a significant effect on viscosity of scCO₂. Increased flow rate could create more preferential flow paths and decrease the areal displacement efficiency. Compared to the continuous injection of scCO₂, the pulse-type injection reduced the probability for occurrence of fingering, subsequently preferential flow paths, and recorded higher areal displacement efficiency. More detailed explanation may need further studies based on closer experimental observations.