• 대한기계학회논문집A
• /
• 제34권7호
• /
• pp.919-928
• /
• 2010

연속주조 시에 폭변경 속도를 향상시키기 위해 폭조정의 4 가지 패턴에 대해 연구하였다. 주요 사항은 폭변경 장치의 구동력을 최소화하고, 몰드 내의 응고막의 변형해석 모델을 개발하고, 폭변경 속도 상승을 제한하는 주요인자를 도출하는 것이다. 폭변경 실험을 근간으로 4 개 패턴의 주요 특징을 도출하였고, 각 패턴에 대한 힘을 비교하였다. 실험은 각 패턴의 구동력 비교를 위해 동일한 주조속도에서 수행하였다. 응고막변형 해석모델의 변수를 조정하기 위해 실험결과를 모델에 적용하였다. 폭변경 속도를 상승시키고, 구동력을 저감시키기 위해 패턴의 변수를 제어하였다. 가장 효율적인 패턴은 고속패턴이었으며, 구동력을 저감하기 위한 주요인자는 구동장치가 이동할 때의 기울기였다.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.285-295
• /
• 2001

The transport phenomena in a wedge-shaped pool of twin-roll continuous caster are affected by the various operating parameters such as the melt-feed pattern, roll-gap thickness, melt-superheat, and casting speed. A computer program has been developed for analyzing the two-dimensional, steady conservation equations for transport phenomena during twin-roll continuous casting process in order to estimate the turbulent melt-flow, temperature fields, and solidification in the wedge-shaped pool. The turbulent characteristics of the melt-flow were considered using a low-Reynolds-number K-$\xi$ turbulence model. Based on the computer program, the effects of the different melt-feed patterns, roll-gap thicknesses, and superheats of melt on the variations of the velocity and temperature distributions, and the mushy solidification were examined. The results show that the liquidus line is located considerably at the upstream region, and in the lower region appear the well-mixed melt-flow and most widely developed mushy zone. Besides, the variation of melt-flow due to varying melt-feed patterns, affects mainly the liquidus line, and scarcely has effects on the solidus line in the outlet region.

• 동력기계공학회지
• /
• 제8권3호
• /
• pp.30-35
• /
• 2004

In the steel making industries, the continuous casting process has been applied to the number of company because of its economical benefit. Casting rolls are utilized for frictional drive and transport of solidifying slap. Dimensional tolerances, mechanical stability and surface condition of the cast roll can affect both the surface and internal quality of the product being cast. To overcome these problems, the industry is accelerating on the rate of technology improvements. Samples were overlaid on the S45C steel by submerged arc welding process. And the hardness, wear, electrochemical corrosion and oxidation tests were carried out. Test results were that all these materials were satisfying basic requirements of caster rolls. By these results, the addition of 0.1%Nb and 0.15%V increase mechanical properties and tempering resistance by its superior carbide forming characteristics in low carbon $12{\sim}13%Cr$ martensitic stainless steels.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2010-2018
• /
• 2003

Although continuous casting process has highly developed, there still remain many problems to be considered. Specifically, two vortex flows resulting from impingement against narrow walls make a flow field unstable in a mold, and it is directly related to internal and external defects of steel products. To cope with this instability, EMBR (Electromagnetic Brake Ruler) technique has been lately studied for the stability of molten steel flow, and it is revealed that molten steel flow in a mold can be controlled with applied magnetic field. However, it is still difficult to clarify flow pattern in an EMBR caster due to complex correlations among variables such as geometric factors, casting conditions, and the place and the intensity of charged magnetic field. In the present study, flow field in a mold is focused with different conditions of electromagnetic effect. To accurately analyze the case, three dimensional low Reynolds turbulent model and appropriate boundary conditions are chosen. To evaluate the electromagnetic effect in molten steel flow, dimensionless numbers are employed. The results show that the location and the intensity of the applied magnetic field significantly influence the flow pattern. Both impingement and internal flow pattern are changed remarkably with the change of the location of applied magnetic field. It turns out that an insufficient magnetic force yields adverse effect like channeling, and rather lowers the quality of steel product.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.216-222
• /
• 2004

The caster roll shells have the good thermal conductivity and the low thermal expansion and have to exhibit high enough strength and good ductility at temperature up to $600^{\circ}C$. Thermal stress in particular is very high due to the contact with the liquid aluminium. The main stresses are of thermal origin, which bring a plastic fatigue on surface. This paper will represent one survey about the investigation of the failure of roll shells for continuous casters and an analysis using the simulation of the temperature distribution and the state of stress during hot rolling. Moreover, there will be a discussion on the roll shell of Mod. HAR 5 which is developed by heat treatment process. Mod. HAR 5 has advantages of high strength, high toughness and increased thermal stress resistance while maintaining the same productivity as the conventional roll.

• 대한산업공학회지
• /
• 제24권4호
• /
• pp.649-660
• /
• 1998

Steel making in Mini Mill consists of three major processing stages: molten steel making in an electric arc fuenace, slab casting in a continuous caster, and hot rolling in a finishing mill. Each processing stage has its own lot grouping criterion. However, these criteria in three stages are conflicting with each other. Therefore, delveloping on efficient lot grouping algorithm to enhance the overall productivity of the Mini Mill is an extremely difficult task. The algorithm proposed in this paper is divided into three steps hierarchically: change grouping, cast grouping, and roll grouping. An efficient charge grouping heuristic is developed by exploiting the characteristics of the orders, the processing constraints and the requirements for the downstream stages. In order to maximaize the productivity of the continuous casters, each cast must contain as many charges as possible. Based on the constraint satisfaction problem technique, an efficient cast grouping heuristic is developed. Each roll consists of two casts satisfying the constraints for rolling. The roll grouping problem is formulated as a weighted non-bipartite matching problem, and an optimal roll grouping algorithm is developed. The proposed algorithm is programmed with C language and tested on a SUN Workstation with real data obtained from the H steel works. Through the computational experiment, the algorithm is verified to yield quite satisfactory solutions within a few minutes.

• 한국주조공학회지
• /
• 제28권3호
• /
• pp.113-118
• /
• 2008

A new approach of producing martensitic structure for guide-roll materials was developed using centrifugal casting instead of classic overlay welding process. Centrifugal casting offered a simpler process, fewer defects and even microstructures. Especially in terms of thermal fatigue cracking which usually occurs in the HAZ of welding beads of used continuous caster guide roll materials made by overlay welding process. A typical tensile strength of 1,600 MPa was obtained by this process and was higher than typical tensile strength($800{\sim}1,200\;MPa$) with overlay welding technique. Tempering at $400{\sim}550^{\circ}C$ for 2 hrs was observed to have significant precipitate hardening effect which increases strength and elongation. Nitrogen content from the Cr-N input in the casting process was found to have positive contribution to decrease the volume fraction of ${\delta}$-ferrite which directly corresponds to increasing strength of the roll materials.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.851-860
• /
• 2020

인구 고령화와 건강 복지에 대한 사회적 관심이 높아지면서 재활복지기를 포함한 실버 및 헬스케어 산업과 관련한 연구들이 활발하게 진행되고 있다. 본 연구에서는 기존에 1차적으로 설계·제작되었던 이·승강 전동휠체어를 사용자 측면에서 보다 더 안전성과 편의성을 갖도록 개선하고자 하였다. 사용자 체형을 고려한 헤드레스트 높이조절 기능의 시트 디자인, 사용성 증대를 위한 암레스트의 길이조절 및 95° 회전 기능, 사용자 탑승 편의성을 위한 바닥까지의 시트하강 및 운행 시 승강할 수 있는 기능, 캐스터 회전반경 및 안전성 증대를 위한 발판 추가 및 풋레스트 길이 조절 기능, 승·하강 시 흔들림 방지를 위한 프레임 및 승·하강 링크 설계 등을 개선시켰다. 또한 안전주행을 위한 컨트롤러 및 드라이브 부문과 사용자 편의성 측면의 기능들을 추가적으로 설계·제작하였다. 추가 기능을 보완하여 제작된 실내 전동휠체어의 동작 상태를 평가하기 위해 구동 실험을 수행하였다. 연속 주행시간, 회전반경, 승·하강 최대 하중, 최대 승강 높이, 소음레벨, 운행 보조센서 센싱 최소거리, 서버 및 앱 프로그램 상호연동 및 기기호환성, 듀티 사이클 최대 오차율의 성능실험을 수행하였다. 실험 결과, 더 개선하여 설계·제작한 전동휠체어는 시험 목표 값을 달성하였으며, 성공적으로 동작하는 것을 확인할 수 있었다. 향후 연구로는 개선하여 제작된 이·승강 전동휠체어에 대해 사용자 측면에서의 사용성 평가를 수행할 것이다.