• 한국정보처리학회논문지
• /
• 제3권6호
• /
• pp.1636-1645
• /
• 1996

본 논문에서는 패턴을 효과적으로 분류하기 위하여 화상자료의 특성인 이웃 화소 간의 종속성을 잘 표현해 주는 깁스확률장의 크리크를 바탕으로 2차원 조건부 모멘트 를 제안하였다. 이 알고리즘 구축은 공간정보를 갖는 조건부 모멘트를 이용하여 특정 벡터를 추출하는 과정과 패턴을 분류하는 과정으로 분리하여 생각한다. 특정벡터를 추출하는 과정은 하나의 패턴에 대해 깁스분포의 크리크로 표현된 파라미터를 추정한 다음, 2차원 조건부 모멘트들을 계산하여 특정벡터로부터 제안된 판별거리함수를 계 산하여 여러 원형 패턴 가운데 최소거리를 산출한 미지의 패턴을 원형패턴으로 분류 한다. 제안된 방법의 성능을 검증하기 위하여 대문자와 소문자 52자로 된 훈련 데이 타를 만들어 486 PC 66Mhz에서 실험을 한 결과 97.5% 이상의 분류성능이 있음을 밝혔 다.

• 한국산업정보학회논문지
• /
• 제6권2호
• /
• pp.16-22
• /
• 2001

본 논문에서는 화상자료의 특성인 이웃 화소간의 종속성을 표현하는데 적합한 깁스분포를 바탕으로 특징벡터를 추출하여 변형된 글자를 인식하는 새로운 방법을 제안하였다. 추출된 특징벡터는 이미지의 크기, 위치, 회전에 대하여 불변한 특성을 갖는 2차원 조건부 모멘트로 구성된다. 변형된 글자 인식을 위한 알고리즘은 특징벡터 추출하는 과정과 패턴을 인식하는 과정으로 구성하였다. (i) 특징벡터는 하나의 이미지에 대하여 추정된 조건부 깁스분포를 바탕으로 2차원 조건부 모멘트를 계산하여 추출한다. (ii) 변형된 문자 인식은 제안된 판별거리함수를 계산하여 최소거리를 산출한 미지의 변형된 문자를 원형문자로 인식한다. 제안된 방법에 대한 성능평가를 위하여, 생성된 훈련 데이터를 만들어 Workstation에서 실험 한 결과 96%이상의 인식성능이 있음을 밝혔다.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.438-444
• /
• 2015

This study describes the effect of T branch shape on internal flow characteristics inside itself. Continuity and three-dimensional Reynolds-averaged Navier-Stokes equation have been used as governing equations for the numerical analysis. The T branch was modeled assuming that it is used for Alaska pipeline project which was planned to provide reliable transportation of natural gas from ANS to Alaska-Yukon border. Therefore the characteristics of T branch and operating condition of pipeline were from report of Alaska pipeline project. The nine T branch shapes were analyzed and the mass flow rate ratio between mainline and branch was assumed to be 0.95 : 0.05, 0.9 : 0.1, 0.85 : 0.15. The results shows that there are typical flow patterns in T branch and the shape of T branch makes some differences to the internal flow of branch rather than mainline.

• 한국해안해양공학회지
• /
• 제6권4호
• /
• pp.327-334
• /
• 1994

실험실 수조에서 조석 및 조류를 발생시키기 위해서는 수조내에 흐름의 분출부와 흡입부를 적절히 설치해야 한다. 분기관은 관수로 측면에 설치된 다수의 구멍을 통하여 관내ㆍ외 압력차에 의해 물을 분출 또는 흡입하는 장치이다. 수조 폭에 따라 균등한 단위폭당 유량을 발생시키기 위해서는 각 구멍의 크기를 적절히 결정해야 하며 이를 위해서는 공급류량, 공급수두, 수두손실, 구멍에서의 분출 및 흡입류량 등의 수리특성을 파악하여야 한다. 본 연구에서는 에너지 방정식과 연속방정식으로부터 비롯되는 비선형 연립방정식을 구성하고 Newton 해법을 적용하여 분출 및 흡입분기관의 수리특성을 파악하였다. 아울러, 자동제어 밸브가 부착된 분기관이 수조폭에 걸쳐 일정한 유량을 유지해야하는 조석수조에 효과적으로 사용될 수 있음을 확인하였다.

• Journal of Chest Surgery
• /
• 제16권3호
• /
• pp.349-355
• /
• 1983

Twenty-seven patients with double-outlet right ventricle underwent complete intracardiac repair between 1978 and 1983, June, at Seoul National University Hospital . Although definite aorto-mitral discontinuity was discovered in 20 patients, both great arteries arose wholly or mostly from the right ventricle in all cases. There were 17 cases with subaortic VSD, 6 with subpulmonic, 2 with doubly-committed, and 2 with non-committed VSD. Pulmonary stenosis was present in 21 patients. Intraventricular baffle repair was applied in 23 patients. Three patients required extracardiac conduit to establish continuity between right ventricle and pulmonary artery, and modified Fontan operation was performed in one patient. Over-all mortality rate was 37.0%, but recently 4 of 15 died [26.7%]. One late death occurred from infective endocarditis. Incremental risk factors were small patient size, subpulmonic or non-committed VSD, presence of PS, coronary artery anomalies, associated valvular lesion and other complicated anomalies. However, great artery relationship, restrictive VSD and transannular patch were not risk factors. No instances of complete heart block occurred. Of the survivors, all showed complete or in complete right bundle branch block and in one patient intermittent ventricular tachycardia had developed. The important cause of death was low cardiac output syndrome.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제22권1호
• /
• pp.28-40
• /
• 2019

The incidence of pediatric-onset inflammatory bowel disease (IBD) is on the rise, accounting for up to 25% of IBD cases. Pediatric IBD often has extensive bowel involvement with aggressive and rapidly progressing behavior compared to adult IBD. Because IBD has a high morbidity rate and can have a lifelong impact, successful transition from pediatric to adult care is important to maintain the continuity of care. Furthermore, successful transition facilitates appropriate development and psychosocial well-being among patients, as well as comprehensive and harmonious healthcare delivery amongst stakeholders. However, there are various obstacles related to patients, family, providers, and organizations that interfere with successful transition. Successful transition requires a flexible and tailored plan that is made according to the patient's developmental abilities and situation. This plan should be established through periodic interviews with the patient and family and through close collaboration with other care providers. Through a stepwise approach to the transition process, patients' knowledge and self-management skills can be improved. After preparation for the transition is completed and the obstacles are overcome, patients can be gradually moved to adult care. Finally, successful transition can increase patients' adherence to therapy, maintain the appropriate health status, improve patients' self-management, and promote self-reliance among patients.

• Steel and Composite Structures
• /
• 제29권6호
• /
• pp.749-758
• /
• 2018

This article derived a hybrid coupling technique using the higher-order displacement polynomial and three soft computing techniques (teaching learning-based optimization, particle swarm optimization, and artificial bee colony) to predict the optimal stacking sequence of the layered structure and the corresponding frequency values. The higher-order displacement kinematics is adopted for the mathematical model derivation considering the necessary stress and stain continuity and the elimination of shear correction factor. A nine noded isoparametric Lagrangian element (eighty-one degrees of freedom at each node) is engaged for the discretisation and the desired model equation derived via the classical Hamilton's principle. Subsequently, three soft computing techniques are employed to predict the maximum natural frequency values corresponding to their optimum layer sequences via a suitable home-made computer code. The finite element convergence rate including the optimal solution stability is established through the iterative solutions. Further, the predicted optimal stacking sequence including the accuracy of the frequency values are verified with adequate comparison studies. Lastly, the derived hybrid models are explored further to by solving different numerical examples for the combined structural parameters (length to width ratio, length to thickness ratio and orthotropicity on frequency and layer-sequence) and the implicit behavior discuss in details.

• Steel and Composite Structures
• /
• 제39권5호
• /
• pp.543-564
• /
• 2021

In this study free vibration analysis of a cracked Goland composite wing is investigated. The wing is modelled as a cantilevered beam based on Euler- Bernoulli equations. Also, composite material is modelled based on lamina fiber-reinforced. Edge crack is modelled by additional boundary conditions and local flexibility matrix in crack location, Castigliano's theorem and energy release rate formulation. Governing differential equations are extracted by Hamilton's principle. Using the separation of variables method, general solution in the normalized form for bending and torsion deflection is achieved then expressions for the cross-sectional rotation, the bending moment, the shear force and the torsional moment for the cantilevered beam are obtained. The cracked beam is modelled by separation of beam into two interconnected intact beams. Free vibration analysis of the beam is performed by applying boundary conditions at the fixed end, the free end, continuity conditions in the crack location of the beam and dynamic stiffness matrix determinant. Also, the effects of various parameters such as length and location of crack and fiber angle on natural frequencies and mode shapes are studied. Modal analysis results illustrate that natural frequencies and mode shapes are affected by depth and location of edge crack and coupling parameter.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.833-841
• /
• 2021

During the postulated severe accident of nuclear reactor, eutectic reaction leads to low-temperature melting of fuel cladding and early failure of core structure. In order to model eutectic melting with the moving particle semi-implicit (MPS) method, the eutectic reaction model is developed to simulate the eutectic reaction phenomenon. The coupling of mass diffusion and phase diagram is applied to calculate the eutectic reaction with the uniform temperature. A heat transfer formula is proposed based on the phase diagram to handle the heat release or absorption during the process of eutectic reaction, and it can combine with mass diffusion and phase diagram to describe the eutectic reaction with temperature variation. The heat transfer formula is verified by the one-dimensional melting simulations and the predicted interface position agrees well with the theoretical solution. In order to verify the eutectic reaction models, the eutectic reaction of uranium and iron in two semi-infinite domains is simulated, and the profile of solid thickness decrease over time follows the parabolic law. The modified MPS method is applied to calculate Transient Reactor Test Facility (TREAT) experiment, the penetration rate in the simulations are agreeable with the experiment results. In addition, a hypothetical case based on the TREAT experiment is also conducted to validate the eutectic reaction with temperature variation, the results present continuity with the simulations of TREAT experiment. Thus the improved method is proved to be capable of simulating the eutectic reaction in the severe accident.

• Tribology and Lubricants
• /
• 제38권6호
• /
• pp.281-286
• /
• 2022

In this study, the effects of Elasto-hydrodynamic lubrication pressure on the critical shoulder height of raceway in an angular contact ball bearing were investigated. Both 3D contact analyses using an influence function and the EHL analysis were conducted for the contact geometry between the ball and raceways. The pressure distributions by 3D contact analysis and EHL analysis for an example bearing were compared. The effect of ellipse truncation on the minimum film thickness also investigated from EHL analysis. The critical shoulder height in the dry contact and the EHL state were compared for various applied loads. It is shown that when the ellipse truncation occurs, the pressure spike for the EHL conjunction is higher than that for the dry contact, and its location moves more inward of the contact center. The steep pressure gradients would increase the flow rate, so in order to maintain flow continuity a significant reduction in film thickness and an abrupt rise in pressure occurs in the edge of shoulder. Significant reduction of the minimum film thickness occurs near the edge of shoulder. The critical shoulder heights in the EHL state are calculated as higher values compared with in the dry contact. This results shows that the determination of critical shoulder height by the EHL analysis is more proper.