• Korean Journal of Food Science and Technology
• /
• v.24 no.1
• /
• pp.14-24
• /
• 1992

An attempt was made to prepare chitin from kuruma prawn shell and antarctic krill for industrial use, and new procedure for the preparation of chitin was developed. When antarctic krill powder and kuruma prawn shell powder were treated through the new procedures developed in this study, purified chitin, identified by IR spectrum and nitrogen content, was obtained. Molecular weight in formic acid of purified chitin was $1.56{\times}10^{5}$ for krill and $1.78{\times}10^{5}$ for kuruma prawn respectively. Degree of polymerization of N-acetylglucosamine was 750 for krill chitin and 850 for kuruma prawn chitin. Purified chitin showed a higher degree of acetylation, and was relatively rich in methionine residue.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.16-22
• /
• 2012

In this paper, the forensic marking algorithm is proposed using psychoacoustic model II and MDCT for high-quality audio. The proposed forensic marking method, that inserts the user fingerprinting code of the audio content into the selected sub-band, in which audio signal energy is lower than the spectrum masking level. In the range of the one frame which has 2,048 samples for FFT of original audio signal, the audio forensic marking is processed in 3 sub-bands. According to the average attack of the fingerprinting codes, one frame's SNR is measured on 100% trace ratio of the collusion codes. When the lower strength 0.1 of the inserted fingerprinting code, SNR is 38.44dB. And in case, the added strength 0.5 of white gaussian noise, SNR is 19.09dB. As a result, it confirms that the proposed audio forensic marking algorithm is maintained the marking robustness of the fingerprinting code and the audio high-quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.620-629
• /
• 2010

The analogue radio broadcasting was proven to be a successful and efficient media of delivering information because of free content and wide availability of cheap receivers. But the competition was more dropped than any other media due to the limited amount of radio spectrum that is available. The risk of doing nothing is to miss the opportunity and to loss existing audiences in the long term, or to be locked into inefficient proprietary systems. That is the reason why it is important to act now. It is time for regulators and market participants to hone their strategies, by clearly establishing factors to adopt the digital radio and to facilitate its diffusion. The purpose of this study is to find adoption factors that affected to potential users of digital radio broadcasting. Former research based on diffusion of innovation theory showed that adoption of innovation is affected by demographic variables, media usage and consumer's attitude of innovation. In this study based on a consumer survey, we examined those factors and characteristics of each steps that suggested in diffusion of innovation theory. The findings of this study have implications to explore the suitable technologies and services of digital radio broadcasting.

• Journal of Surface Science and Engineering
• /
• v.40 no.1
• /
• pp.23-31
• /
• 2007

The objective of this study is to investigate the effect of Al addition on the reaction behavior of cobalt with molten zinc. Pure cobalt specimen was immersion tested in the three kinds of molten zinc (pure, 0.12%Al added and 0.24%Al added) baths at $460^{\circ}C,\;490^{\circ}C\;and\;520^{\circ}C$. For the understanding of degradation processes, specimens were analyzed with scanning electron microscope (SEM) and energy dispersive spectrum (EDS), and electrochemical stripping method. When 0.12% and 0.24% Al was added in molten zinc baths, three intermetallic compounds layers of ${\gamma},\;{\gamma}_1,\;and\;{\gamma}_2$ were formed on the Co matrix and ${\beta}_1$ layer was not formed between the Co matrix and the ${\gamma}$ layer. Particles of CoAl intermetallic compound were formed at the interface between the ${\gamma}_2$ layer and zinc melt and they did not adhere to the Co-Zn intermetallic layer. Weight loss of the Co specimen increased as Al content in the molten zinc increased and the relationship of weight loss vs. immersion time followed parabolic rate law. Rate controlling process for the reaction rate of Co with Al added molten zinc was analyzed as the diffusion process of Al atom through a boundary layer between the ${\gamma}_2$ layer and the Al added zinc melt.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.353-358
• /
• 2006

Flavonoid and limonoid compounds were determined by HPLC on the methanol and ethanol extracts from citron seeds. The quantities of the compounds in these categories were higher in the ethanol extract than methanol extract. The types of these compounds were detected in larger numbers in the ethanol extract. The content of limonin was the largest in both methanol and ethanol extract among the detectable compounds ; 140.34 mg/100g and 170.98 mg/100g, respectively, and the contents of other compounds, caffeic acid, naringin, lutin, nomilin, were found in large amount in this order. The molecular weights of forty two compounds in ethanol extract were determined with mass spectrums and extracted ion current chromatograms by HPLC/MS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.5
• /
• pp.401-406
• /
• 2001

The applicability of non-destructive near infrared reflectance spectroscopic (NIRS) method was tested to determine the protein and oil contents of intact soybean [Glycine max (L.) Merr.] seeds. A total of 198 soybean calibration samples and 101 validation samples were used for NIRS equation development and validation, respectively. In the developed non-destructive NIRS equation for analysis of protein and oil contents, the most accurate equation was obtained at 2, 8, 6, 1(2nd derivative, 8 nm gap, 6 points smoothing, and 1 point second smoothing) and 2, 1, 20, 10 math treatment conditions with Standard Normal Variate and Detrend (SNVD) scatter correction method and entire spectrum (400-2500 nm) by using Modified Partial Least Squares (MPLS) regression, respectively. Validation of these non-destructive NIRS equations showed very low bias (protein: 0.060%, oil: -0.017%) and standard error of prediction (SEP, protein: 0.568 %, oil : 0.451 %) as well as high coefficient of determination ($R^2$, protein: 0.927, oil: 0.906). Therefore, these non-destructive NIRS equations can be applicable and reliable for determination of protein and oil content of intact soybean seeds, and non-destructive NIRS method could be used as a mass screening technique for selection of high protein and oil soybean in breeding programs.

• Analytical Science and Technology
• /
• v.8 no.2
• /
• pp.117-124
• /
• 1995

To Purify hemoproteins showing from 218nm absorbance, crude liver extract of human with hepatocirrhosis was treated with Triton N-101. Hemoproteins were purified by modification of Mohamed's method. This crude extract was applied to Octyl-Sepharose CL-4B column and the step elution was performed with 0.06% Lubrol PX and 0.25% Lubrol PX. The absorption of effluents were examined at 418nm and two peaks were appeared(Fig. 2). Hemoproteins were purified from Hyydroxyapatite and DEAE-Sephadex A-25 columns which the first peak was applied to(Fig. 3, 4). In death with suddenly, purified hemoproteins with 62 and 45kDa were obtained from 12.5% SDS-PAGE. In death with hepatocirrhosis, purified hemoprotein with 54kDa was obtainded from 12.5% SDS-PAGE(Fig. 5). Cytochrome P450 was purified to a specific content of 20.8nmol/mg protein with a recovery of about 4.1%. Absorbance maximum of these hemoproteins were 446nm at UV spectruum(Fig. 6).

• Journal of the Mineralogical Society of Korea
• /
• v.9 no.2
• /
• pp.102-112
• /
• 1996

The precious serpentine, referring to a rare and highly valuable gem variety of serpentine group minerals, is found to occur in serpentinite from Booyo Gren Jade Mine which is located in Oesan-myun, Booyo-gun of Chungchungnam-do. Geommological properties of the precious serpentine have been investigated by use of polarizing microscope, specific gravity balance, refractometer, hardness pencils, X-ray diffractometer, XRF, ICP-MS analyser, and infrared absorption spectroscope.The precious serpentine from Booyo is colored deep green with oily luster and semi-transparent. It is highly tough and Mohs's scale of hardness is measured to be 5-6. Specific gravity is determined to be 2.67, and a single refractive index ND=1.56 is observed by a spot method, using sodium light source. X-ray powder diffraction data is represented by the reflection lines at 7.40(100), 4.64(25), 3.68(68), 2.757(69), 2.530(49), 2.549(32), and 1.710(21${\AA}$), which compares very well with that of antigorite of serpentine group minerals. The major chemical compositions of the precious serpentine group minerals. The major chemical compositions of the precious serpentine are SiO2 42.49%, MgO 39.08%, Fe2O3 3.85%, and H2O 11.87%. Besides, trace elements such as Cr(2188), Ni(1110ppm), Co(58ppm), and Ta (108ppm) are relatively spectrum shows peaks at 3670, 1190, 1070, 980 and 610cm-1. Strong absorption at 3670cm-1 is due to OH stretching, and 1190, 1070 and 980cm-1 due to SiO stretching. The absorption 610cm-1 is formed by alteration of pre-existing ultramafic rock, namely peridotite, with an introduction of fluid with very little content of CO2, under 400$^{\circ}C$ environment. Magnetite inclusions, finely disseminated in the precious serpentine, may be a result of Fe precipitation, during serpentinization of olivine-bearing country rock.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.205-211
• /
• 1995

To increase the solubility of iodine and iodine releasing agents, which are used widely as a topical broad spectrum antiseptics and disinfectant sanitizers, its inclusion complexes were prepared and studied. Inclusion complexes of iodine with ${\beta}-cyclodextrin$ were prepared by coprecipitation method and complex formation was acertained by differential scanning calorimetry and microscopic observation. Iodine content of inclusion complex was determined by means of iodometry. Tablets containing inclusion complex were manufactured with sugar, citric acid, magnesium stearate, dextrose. Stability of inclusion complexes and tablets was evaluated by accelerated stability test, and comparing with PVP-iodine. During preparation, use of 50% ethanol solution is preferable to water as the medium because the former resulted in more stable complex for a month under accelerated storage conditions. Solubility of iodine in KI aqueous solution was 0.048 g/ml and lower than in 50% ethanol solution. Inclusion complex and its tablets were very stable at severe condition for one month, and comparable to PVP-iodine in the aspect of stability. Inclusion complex tabletswere not affected with citric acid, sugar, dextrose, and direct tableting method was recommendable because wet granulation using ethanol gave some release of included iodine during process.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.1
• /
• pp.1-11
• /
• 1996

Mechanical alloying is an effective process to finely distribute inert dispersoids in an Al-TM(TM is a transition metal) system. It has been considered that high melting point aluminides are formed by precipitation from supersaturated Al(Ti) powder. This analysis is based on the fact that much higher content of TM than the solubioity can be dissolved in alpha aluminum during the high energy ball milling. Thus, decomposition behavior of Ti in the Al(Ti) was considered very important. But it is confirmed that the higher portion of Ti than Al(Ti) solid solution is existed as nano-sized Ti particles in the MA powders by high energy ball nilling from the XRD spectrum and TEM analysis in this study. Therefore, the role of undissolved TM particles affect the formation of aluminides should be suitably considered. In this study, we present experimental observation on the formation of $Al_3Ti$ fron mechanical alloyed Al-Ti alloys in the hyperperitectic region. This study showed that, in the mechanically alloyed Al-20wt%Ti specimen, intermediate phase of cubic $Al_3Ti$ and tetragonal $Al_{24}Ti_8$ formed at $300{\sim}400^{\circ}C$ and $400{\sim}500^{\circ}C$, respectively, before the MA state reaches to equilibrium at higher temperatures. The formation behavior of $Ll_2-Al_3Ti$ is interpreted by interdiffusion of Al and Ti in solid state based on the fact that large amount of nano-sized Ti particles exist in the milled powder. Present analysis indicated undissolved Ti particles of nanosize should have played an important role initiation the formation of $Al_3Ti$ phase during annealing.