• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.143-179
• /
• 1989

To observe the bonding behavior of palladium-based alloys to porcelain; 1. Pd-Co binary alloy with the higher cobalt content, 2. Pd-Co binary alloy with the lower cobalt content, 3. Pd-Ag-Sn ternary alloy, 4. Pd-Ag binary alloy, 5. Pd-Cu-Au ternary alloy and 6. Pd-Cu binary alloy were made as 6 groups of experimental alloys. Each group of alloy was divided into 4 sub-groups such as one sub-group that was not degassed and three sub-groups that degassed for 5 minutes, 10 minutes and 15 minutes. On each specimen, weight changes after degassing, morphological changes of oxide layer by changing the degassing time, compositional changes at metal-ceramic interface and bond strength of metal-ceramic measured with planar shear test were observed and compared. The results of the present study allow the following conclusions to be drawn: 1. The alloy showing the greatest bond strength was Pd-Cu alloy without gold and bond strength was decreased by alloying gold to them. 2. Although Pd-Co alloy showed the most prominent oxidation behavior, bond strength of them to porcelain was not greatly high by the formation of porosities at metal-ceramic interfaces. 3. Likewise tin, cobalt formed the peaks on line profiles at metal-ceramic interface, however copper did not exhibit such peaks on line profiles. 4. Mainly, oxide layer on Pd-Co alloy was composed with cobalt, and for Pd-Co alloy with higher cobalt content the rise of bond strength was not significant by increased degassing time. 5. On Pd-Ag alloy not containing tin, during degassing for 15 minutes silver content was increased at metal-ceramic interface. 6. As an oxidized element, tin formed the oxide layers that widen their area by increasing the degassing time, while cobalt and copper showed the morphological changes of particle or crystal on oxide layer.

• 열처리공학회지
• /
• 제13권3호
• /
• pp.143-150
• /
• 2000

Ferritic plasma nitrocarburising was performed on pure iron using a modified DC plasma unit. This investigation was carried out with various gas compositions which consisted of nitrogen, hydrogen and carbon monoxide gases, and various gas pressures for 3 hours at $570^{\circ}C$. After treatment, the different cooling rates(slow cooling and fast cooling) were used to investigate its effect on the structure of the compound layer. The ${\varepsilon}$ phase occupied the outer part of the compound layer and ${\gamma}^{\prime}$ phase existed between the ${\varepsilon}$ phase and the diffusion zone. The gas composition of the atmosphere influenced the constitution of the compound layer produced, i.e. high nitrogen contents were essential for the production of ${\varepsilon}$ phase compound layer. It was found that with increasing carbon content in the gas mixture the compound layer thickness increased up to 10%. In the gas pressure around 3 mbar, the compound layer characteristics were slightly effected by gas pressure. However, in the low gas pressure and high gas pressure, the compound layer characteristics were significantly changed. The constitution of the compound layer was altered by varying the cooling rate. A large amount of ${\gamma}^{\prime}$ phase was transformed from the ${\varepsilon}$ phase during slow cooling.

• 대한지리학회지
• /
• 제42권6호
• /
• pp.898-913
• /
• 2007

전북 부안 화강암지역에서 기반암을 피복하고 있는 세립질 뢰스-고토양 연속층의 퇴적물 특성과 기원지를 검토하였다. 조사단면에서 퇴적층 두께는 약 280cm이며, 상부로부터 표층, Layer 1(고토양), Layer 2(뢰스), Layer 3(고토양), Layer 4(뢰스), Layer 5(고토양)로 이루어져 있다. 대자율값은 각 층준 사이에 뚜렷한 차이를 보이며 변동한다. pH, 산화환원전위(ORP), 수분함량, 토양경도와 달리, 유기물 함량은 대자율과 유사하게 토층의 특징을 잘 반영한다. 세 가지 조건하에서 측정된 토색 중 습윤 상태의 토색이 각 층준의 차이를 양호하게 반영하지만, 먼셀(Munsell) 색체계의 특성상 일부 지점에서는 변화 양상이 다소 불분명하다. 부안단면의 지형적 특성, 퇴적 구조 그리고 주원소 및 희토류 원소 조성이 주변 기반암 및 하천퇴적물과는 분명한 차이를 보이는 반면, 중국 황토고원의 시료와 매우 유사한 조성을 보이기 때문에, 연구 지역의 뢰스는 중국 황토고원 및 그 주변지역에서 기원한 물질에 의해 형성된 것으로 판단된다. 퇴적 이후에는 퇴적지의 환경, 즉 한국의 기후조건, 특히 많은 강수량에 의해 기원지와 다른 풍화특성을 보인다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1326-1331
• /
• 2009

Drying process in the cylindrical thin film layer of sludge with the thickness less than a few millimeters has been investigated. Thin film drying is specially designed and used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic cylindrical surface through which thermal energy is supplied to the layer during drying. The wall temperature is assumed to be constant during drying in the present study for the simplification. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of some physical parameters on drying has been examined to figure out the drying characteristics of the sludge layer.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.215-215
• /
• 2014

Composites layer of Al-Cr-Ni-O system was prepared on a steel plate by hydro-thermal process at $700^{\circ}C$ for 12 hours, which phase identification and thermal conductivity were determined. The composites layer consisted of aluminum nitride, alumina, chromium carbide and aluminium, which density was $3.7kg/m^3$. The thermal conductivity of the coating layer determined by thermal data acquisition system was about 98.0 W/m/ which depended on the AlN content. Numerical modelling of the heat transfer behavior of the coating layer was well agreement with the empirical data.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1128-1133
• /
• 2008

Drying process in the thin film layer of sludge with the thickness less than a few millimeters has been investigated using the simple one-dimensional model. Thin film drying is usually used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic surface through which thermal energy is supplied to the layer during drying. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of heating temperature, film thickness, and air velocity on drying has been examined to figure out the drying characteristics of the sludge layer.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권3호
• /
• pp.81-87
• /
• 2018

It is common practice to display high-quality video images on the large display among the methods of developing tourist attractions and culture in the region as experience contents differentiation is required. This paper combines the local attractions with the OLED dual layer display system and the extended image implementation and augmented interaction technique to give the experiencer a realistic space, such as directing to new experiences and beautiful sights. In this paper, we added UI layer to additional layers of images to enable users to experience sightseeing information, weather, maps, accommodation, festivals and photo materials with images. It is implemented to add fun through interlocking. We also developed transparent OLED and dual layer panel and 3-channel multi-image playback technique.

• 열처리공학회지
• /
• 제1권1호
• /
• pp.8-12
• /
• 1988

This study has been carried out to evaluate gaseous nitrocarburizing treatment undertaken for pure iron at $570^{\circ}C$ in an atmosphere containing 50% endothermic gas, generated from natural gas, and 50% ammonia. The results obtained from the experiment are as follows ; 1) The microstructure of gaseous nitrocarburized pure iron consists of the compound layer on the surface and the diffusion zone beneath it. The compound layer progresses uniformly into ferrite with a thickness of $20{\mu}$ obtained after treating for 3 hours. 2) Chemical analysis has shown that the compound layer has a C/N ratio of 0.19 and that the average combined interstitial content of the compound layer is about 30 atomic percent, which is close to the lower limit of the ${\varepsilon}$-carbonitride phase field in Fe-C-N phase diagram. 3) X-ray diffraction analysis has revealed that the compound layer consists mainly of the c.p.h. phase, ${\varepsilon}-Fe_3$(C.N) and a small amount of $Fe_4N$ and traces of ferrite are also present in the compound layer. 4) The microhardness of the compound layer is about 600 V.H.N and shows a relatively sharp fall-off at the compound layer/diffusion zome interface. 5) The average actual degree of ammonia dissociation is calculated to be 27% for a gaseous nitrocarburizing treatment carried out at $570^{\circ}C$.

• 한국화재소방학회논문지
• /
• 제24권6호
• /
• pp.1-6
• /
• 2010

산불 형태 중에서 뒷불은 지표층 내부의 발화점 이상 온도가 분해층에서 부식층으로 전이되어 뒷불이 발생 할 수 있는 형태로 잠재적 위험성을 가지고 있다. 본 논문은 뒷불의 현장과 유사한 지표층 구조로 설정하여 실험을 통해 뒷불의 잠재적 위험성과 연소특성 규명을 목적으로 한다. 시료는 침엽수종 소나무 낙엽층과 활엽수종 굴참나무 낙엽층으로, 실제 산림내의 지표층 구조인 낙엽층, 분해층, 부식층로 구분하여 재현하였다. 8개의 열전대(K-type)를 층별 경계면과 그 사이에 배치하여 전이온도, 지속시간, 전파속도를 측정하였다. 결과적으로 F-H층으로 전이되는 경우와 전이가 일어나지 않은 경우는 L층과 F층 경계면의 발화조건이며, 유기물층의 뒷불 전이 임계습도는 35~44% 사이에 존재하며, 온도는 $350^{\circ}C$ 이상시 뒷불 전이가 일어날 확률이 아주 높다는 결론을 도출하였다. 본 연구에서는 다층구조의 뒷불 모델을 제시하였으며 이를 사용하여 훈소의 층간 전이현상, 함수율에 따른 발화여부, 전파속도 및 시간에 따른 경계면의 온도변화 등을 알 수 있었다. 또한 뒷불의 연소특성을 규명할 수 있는 실험방법을 확립하였다.

• 한국가금학회지
• /
• 제45권2호
• /
• pp.89-96
• /
• 2018

본 실험은 75주령 산란 성계(Hy-line) 가슴육을 이용하여 너깃을 제조하는데 STPP와 카놀라유 첨가가 이화학적 및 관능적 품질에 미치는 효과를 구명하기 위해 실시하였다. 성계육 너깃에 STPP를 0%, 0.1%, 0.2%, 0.3% 첨가할수록 수분함량과 수율 그리고 전단력과 경도가 유의적으로 증가하였다(P<0.05). 관능평가에서도 STPP 0.3%를 첨가하면 조직감과 향기 점수가 증가하였다(P<0.05). 카놀라유를 5%, 10%, 15%로 각각 첨가하여 성계육 너깃을 제조하면 카놀라유의 함량 증가에 따라 지방 유출과 수분 유출량이 증가하였지만(P<0.05), 전단력 및 경도에서는 유의적으로 감소하였다(P<0.05). 관능평가에서도 카놀라유 15%를 첨가하면 조직감과 종합적 기호도가 유의적인 증가를 나타냈다(P<0.05). 이를 종합해 보면 STPP 0.3%와 카놀라유 15%를 성계육 치킨너깃에 첨가하면 품질이 향상된 제품을 생산할 수 있다고 판단된다.