• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.57-67
• /
• 2020

Pinus densiflora is the most widely distributed tree species in South Korea. Its ecological and socio-cultural attributes makes it one of the most important tree species in S. Korea. In recent times however, the distribution of P. densiflora has been affected by dieback. This phenomenon has largely been attributed to climate change. This study was conducted to investigate the responses of growth and physiology of P. densiflora to drought and nitrogen fertiliz ation according to the RCP 8.5 scenario. A Temperature Gradient Chamber (TGC) and CO₂. Temperature Gradient Chamber (CTGC) were used to simulate climate change conditions. The treatments were established with temperature (control versus +3 and +5℃; aCeT) and CO₂ (control: aCaT versus x1.6 and x2.2; eCeT), watering(control versus drought), fertilization(control versus fertilized). Net photosynthesis (P_n), stomatal conductance (g_s), biomass and relative soil volumetric water content (VWC) were measured to examine physiological responses and growth. Relative soil VWC in aCeT significantly decreased after the onset of drought. P_n and g_s in both aCeT and eCeT with fertiliz ation were high before drought but decreased rapidly after 7 days under drought because nitrogen fertilization effect did not last long. The fastest mortality was 46 days in aCeT and the longest survival was 56 days in eCeT after the onset of drought. Total and partial biomass (leaf, stem and root) in both aCeT and eCeT with fertiliz ation were significantly high, but significantly low in aCeT. The results of the study are helpful in addressing P. densiflora vulnerability to climate change by highlighting physiological responses related to carbon allocation under differing simulated environmental stressors.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.180-203
• /
• 2020

In this study, the period before the Gwanbok of meritorious vassals' portraits was expressed in the acheongsaek-Heuk-Danryung was defined as the first period, and the costumes worn in portraits of meritorious vassals from Gaeguk (1392) in the early Joseon Dynasty to Jwali (1471) during the era of King Seongjong were reviewed. The portraits(1476) of Jeokgae meritorious vassals (1467) depicted as the Gwanbok of acheongsaek Heuk-Danryung were excluded. Among the copies that are currently considered to be portraits of meritorious vassals belonging to the first period, the portraits of Lee-je, Lee Cheon-woo, Ma Cheon-mok, Shin Suk-ju, Seol Gye-jo, and Lee Sung-won were selected, and the formative characteristics of Gwanbok components were examined. The Samo of Sam-Gongsin in the early Joseon Dynasty had a low height, a rounded end, and the side wings were narrow and short. However, since King Danjong, Jeongnan·Jwali meritorious vassals retained a higher form, and the side wings were twice as long. It was also confirmed that the pattern was not expressed in the side wings. The Danryung was expressed in light-colored Danryung without specific colors at the beginning of the country. After King Sejong, the Heuk-Danryung system for Yebok began, but it was not reflected in the Gwanbok of meritorious vassals' portraits, and was expressed as damhongsaek-Danryung after King Danjong. The pattern was not expressed on the exterior of the Danryung, and inner-wrinkled Mu was expressed on the side line. The Dapho and Cheolrik, the undergarments of the Danryung, were also confirmed as being blue (the Dapho) and green (the Cheolrik) after the Jeongnan meritorious vassals. The early Sam-Gongsin's Pumgye was expressed by rank belt, but as the system of rank badge was established after King Danjong, it began to express the Pumgye by rank badge and rank belt. Among the portraits of meritorious vassals, the rank badge was expressed only in the portrait of Sin Suk-ju, a Jeongnan meritorious vassal. As Hwaja worn on the Danryung, Heuk-hwa were confirmed in the Sam-Gongsin portraits of the early Joseon Dynasty. However, in the portraits of Jeongnan and Jwali meritorious vassals after King Danjong, the Baek-hwa was confirmed. In addition, in the seam parts of the Heuk-hwa and Baek-hwa identified in some portraits of meritorious vassals, Hwi decorated with yeongeumsa were identified, and it was found that the Hwaja decorated with Hwi were the Hyeopgeum-hwa worn by the 3rd rank and above.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.56-61
• /
• 1997

A study was carried out to find out the basic information in physical properties for selection and manufacturing the good seedling media through the analysis of the physical properties, such as particle size, water retention and three phases of the major horticultural substrates. Easily available water(EAW), the water contents between 1kPa and 5kPa water potental, was highest in peatmoss with 39%, and perlite 34.0%, vermiculite 16.9%, but the values of osmunda and bark were lower than 4.8%. Water buffering capacity(WBC), the water content between 5kPa and 10kPa, was 6.1% in peatmoss and 2.3% in vermiculite but it was lower than 1.0% in other substrates. To adjust the suitable range of water potential at crossing point of water and air curves to 1.5~2.5kPa, more finer materials were needed in osmunda and bark, and more coarser materials must be added to peatmoss, perlite and vermiculite. Water potentials of substrates in saturated pot condition were equivalent to 2.2kPa in peatmoss and others were ranged in 1.0kPa to 4.3kPa of water potential in pressure chamber.

• The Korean Journal of Mycology
• /
• v.10 no.1
• /
• pp.33-39
• /
• 1982

Carpophores of ten Korean strains of Lentinus edodes (Berk.) Singer, an antitumor polysaccharide producing fungus, were extracted with 0.1N NaOH solution. The extracts were dialized for seven days in distilled water and lyophilized to produce crude polysaccharide powders. Thus obtained crude polysaccharide samples were assayed for sugar contents by colorimetric method with anthrone reagent. Among ten strains examined Lentinus edododes-DMC7 was found to be the richest strain in polysaccharide content of carpophores. By shake culture experiment for biomass production, L. edodes-DMC7 was found to be the second most productive strain among seven strains examined. Cultural characteristics of L. edodes-DMC7 were investigated by shake culture method. The best result was obtained when L. edodes-DMC7 was cultured in the medium containing glucose 8g, starch 80g, yeast extract 12g, $KH_2PO_4\;0.87g,\;MgSO_4{\cdot}7H_2O\;O.5g,\;CaCl_2\;0.3g,\;FeSO_4{\cdot}7H_2O\;10mg\;ZnSO_4{\cdot}7H_2O\;4mg,\;CuSO_4{\cdot}5H_2O\;lmg,\;MnCl_2{\cdot}4H_2O\;7mg\;per\;11\;at\;28^{\circ}C$, 180 rpm, for 12 days. Thus thirty-three grams of dry mycelia was obtained per one liter of medium.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.35-42
• /
• 2018

Objectives: The objectives of this study are to research the usage characteristics of asbestos-containing building materials and to conduct exposure risk assessment by applying no. 2016-230 "Methods of Risk Assessment of Asbestos-Containing Buildings" from the Ministry of Environment. Methods: One hundred buildings located in the Seoul and Gyeonggi-Incheon area were chosen, with 29 in Seoul, 20 in Incheon, and 51 in Gyeonggi-do Province. The year of construction was divided between three buildings in the 1970s, 11 buildings in the 1980s, 42 buildings in the 1990s, and 44 buildings in the 2000s. The bulk samples were analyzed by using a polarizing microscope after a pre-process using a stereomicroscope in a hood with an HEPA filter. This study defined ACMs(asbestos-containing materials) as asbestos when the content percentage was over 1% in the analysis result. Methods and standards of risk assessment of asbestos-containing building materials were conducted by refering to no. 2016-230 "Method of Risk Assessment of Asbestos-Containing Buildings" from the Ministry of Environment. The risk of exposure to ACMs was rated by a score based on three categories(high, middle, low risk of asbestos exposure). Results: In this study, 30 of the 100 buildings and 36 of the 416 bulk samples(8.6%) were found to have had asbestos. Asbestos was detected at a high rate, in 18 out of 42, in buildings constructed in the 1990s and at the lowest rate(7 out of 44) for buildings constructed in the 2000s. As a result of the evaluation according to no. 2016-230 "Method of Risk Assessment of Asbestos-Containing Buildings" of the Ministry of Environment, the risk assessment level of two asbestos-containing building materials was found to be "Medium", and 28 buildings materials were found to be at the "Low" level. Conclusion: As asbestos is regulated by the government, it is required to conduct active management and implemention by introducing methods of risk assessment of asbestos exposure that are supported by data from various situations. In the case of buildings owned by individuals, building owners should be aware of the risk of exposure to asbestos.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.81-99
• /
• 2010

Lately, in consumers' markets the number of new items is rapidly increasing at an overwhelming rate while consumers have limited access to information about those new products in making a sensible, well-informed purchase. Therefore, item providers and customers need a system which recommends right items to right customers. Also, whenever new items are released, for instance, the recommender system specializing in new items can help item providers locate and identify potential customers. Currently, new items are being added to an existing system without being specially noted to consumers, making it difficult for consumers to identify and evaluate new products introduced in the markets. Most of previous approaches for recommender systems have to rely on the usage history of customers. For new items, this content-based (CB) approach is simply not available for the system to recommend those new items to potential consumers. Although collaborative filtering (CF) approach is not directly applicable to solve the new item problem, it would be a good idea to use the basic principle of CF which identifies similar customers, i,e. neighbors, and recommend items to those customers who have liked the similar items in the past. This research aims to suggest a hybrid recommendation procedure based on the preference boundary of target customer. We suggest the hybrid recommendation procedure using the preference boundary in the feature space for recommending new items only. The basic principle is that if a new item belongs within the preference boundary of a target customer, then it is evaluated to be preferred by the customer. Customers' preferences and characteristics of items including new items are represented in a feature space, and the scope or boundary of the target customer's preference is extended to those of neighbors'. The new item recommendation procedure consists of three steps. The first step is analyzing the profile of items, which are represented as k-dimensional feature values. The second step is to determine the representative point of the target customer's preference boundary, the centroid, based on a personal information set. To determine the centroid of preference boundary of a target customer, three algorithms are developed in this research: one is using the centroid of a target customer only (TC), the other is using centroid of a (dummy) big target customer that is composed of a target customer and his/her neighbors (BC), and another is using centroids of a target customer and his/her neighbors (NC). The third step is to determine the range of the preference boundary, the radius. The suggested algorithm Is using the average distance (AD) between the centroid and all purchased items. We test whether the CF-based approach to determine the centroid of the preference boundary improves the recommendation quality or not. For this purpose, we develop two hybrid algorithms, BC and NC, which use neighbors when deciding centroid of the preference boundary. To test the validity of hybrid algorithms, BC and NC, we developed CB-algorithm, TC, which uses target customers only. We measured effectiveness scores of suggested algorithms and compared them through a series of experiments with a set of real mobile image transaction data. We spilt the period between 1st June 2004 and 31st July and the period between 1st August and 31st August 2004 as a training set and a test set, respectively. The training set Is used to make the preference boundary, and the test set is used to evaluate the performance of the suggested hybrid recommendation procedure. The main aim of this research Is to compare the hybrid recommendation algorithm with the CB algorithm. To evaluate the performance of each algorithm, we compare the purchased new item list in test period with the recommended item list which is recommended by suggested algorithms. So we employ the evaluation metric to hit the ratio for evaluating our algorithms. The hit ratio is defined as the ratio of the hit set size to the recommended set size. The hit set size means the number of success of recommendations in our experiment, and the test set size means the number of purchased items during the test period. Experimental test result shows the hit ratio of BC and NC is bigger than that of TC. This means using neighbors Is more effective to recommend new items. That is hybrid algorithm using CF is more effective when recommending to consumers new items than the algorithm using only CB. The reason of the smaller hit ratio of BC than that of NC is that BC is defined as a dummy or virtual customer who purchased all items of target customers' and neighbors'. That is centroid of BC often shifts from that of TC, so it tends to reflect skewed characters of target customer. So the recommendation algorithm using NC shows the best hit ratio, because NC has sufficient information about target customers and their neighbors without damaging the information about the target customers.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.2
• /
• pp.132-139
• /
• 1995

This experiment was canied out to select the soybean of high productivity suited for soiling. and growth characterisitcs, palatability, dry matter and crude protein yield of 10 cultivars of soybean have been evaluated at the experimental forage field. College of Natural Science of Kon-Kuk University in Chungju over three years (1 989-1 09 1 ). The results obtained are summarized as follows: JangBaek showed the tallest plant length from the 70th day to 80th day during cultivation period. and BaekUn showed the tallest at 90th day. PalDal among all cultivars showed the fastest growth rate and the strongest resistant lodging during cultivation period. The stem diameter of 70th day showed highly in order of PalDal and HwangKeum > BaekUn > KwangKyo and JangYeob, the 80th day showed highly in the order of TogYu > BaekCheon > JangBaek and 90th day showed highly in order of BangSa > BaekCheon > JangYeob. Stem hardness was highly increased with increasing of cultivation period, but no significant difference were found among the soybean cultivan. Especially, BaekUn and TogYu of 90th day showed very high as 17.9 and 17.6 kg/cm2, respectively. In the number of branch, PalDal was the lowest during cultivation period(70, 80 and 90th day), and 90th day showed lower two and three times than other soybeans(P<0.05). In the leaf rate, BaekCheon showed the highest according to cultivation period and the lowest in JangBaek. The fresh yield was tended to increase by increasing cultivation period at all cultivars except KwangKyo, but no significant differences were found among cultivars. Dry matter yield of JangYeob was the highest as 5, 861 kg/ ha at 70th day, and that of KwangKyo and TogYu was the highest as 7, 471 and 10, 603 kgha at 80th and 90th day, respectively. Relative palatability of 70th days showed very high at all soybean cultivars(81-100%), and that of 80th and 90th day showed the highest at TogYu, while showed the lowest at PalDal. In crude protein content of the 70th, 80th and 90th day, DanYeob, JangYeob and HwangKeum were the highest as 20.1, 17.9 and 20.4 percentage, respectively. Crude protein yield during cultivation period showed the highest at JangYeob(7Oth : 1, 068, 80th : 1, 211, 90th : 1, 882 kglha), but showed the lowest at BangSa(70th : 61 1, 80th : 814, 90th : 1, 078 kg/ha).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.26-32
• /
• 2014

'Dahan' (Avena sativa L.), a winter oat cultivar for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute Crop Science (NICS), Rural Development Administration (RDA) in 2011. It was derived from an original cross between $F_1$[Sprinter/73625] and 'Gwiri26'. Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Suwon. A line, 'SO99027-GB-B-113-4-4-3', was selected for cold tolerance and good agronomic characteristics and as a line name of 'Gwiri75'. The line 'Gwiri75' was subsequently evaluated for cold tolerance and forage yield during 3 years in four region such as Yesan, Iksan, Kimjae, and Jeju, from 2009 to 2011 and finally named as 'Dahan'. Though similar in heading date to the check cultivar Samhan, 'Dahan' had tall plant length and lodging resistance. It's average forage dry matter yield harvested at milk-ripe stage was 15.6 ton $ha^{-1}$, compared with 14.1 ton $ha^{-1}$ of check cultivar. Cultivar 'Dahan' was lower to the check cultivar 'Samhan' in protein content (8.4% and 9.9%, respectively), while it was superior to the check cultivar in total digestible nutrients (TDN) (60.8% and 59.3%, respectively), and in TDN yield $ha^{-1}$ (9.5 ton and 8.4 ton, respectively). Fall sowing of 'Dahan' is recommended only in the areas where daily minimum mean temperatures are averaged higher than $-7^{\circ}C$ in January, and excluded in mountain area where frost damage is presumable.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.477-484
• /
• 2017

This study was conducted to investigate the content of sulfur dioxide, carotenoids and the degree of contamination of Bacillus cereus in 33 kinds of dried sweet potato from domestic mainly dried agricultural products in Korea. According to the characteristics of dried sweet potato samples, it was classified into four clusters and as a result of analyzing the contents of sulfur dioxide, carotenoids and the degree of contamination B. cereus was no significant difference among the clusters. The detection ranges of residual sulfur dioxide from 33 dried sweet potatoes ranged from 0.38 to 28.16 mg/kg, three cases (9.09%) were detected at the reference level of 10 mg/kg or more. But no samples exceeding 30 mg/kg, the tolerance level of sulfur dioxide in dried sweet potatoes were detected. Since dried sweet potato does not have a standard for carotenoids, when comparing the national and international standards of carotenoids, the range of detection of carotenoids in dried sweet potato was $46{\sim}2,663{\mu}g$/100 g, which was within the reference range of $0{\sim}9,826{\mu}g$/100 g. In principle colonies suspected to be B. cereus in dried sweet potato were not detected. In 7 cases (21.21%), there were detected in the range of 0.05~1.59 log CFU/g but not more than 3 log CFU/g as the reference value. The results of this study are expected to be used as basic data to establish quality standard for dried sweet potatoes. In order to control the quality of dried sweet potatoes in domestic market, raw materials, drying method and packaging after distribution, it is necessary to maintain and maintain the process steadily.