• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.281-290
• /
• 2022

The direct shear test is commonly used to evaluate the shear behavior of frozen soil-structure interfaces under normal stress. However, failure criteria, such as the Mohr-Coulomb failure criterion, are needed to obtain the unconfined shear strength. Hence, the punch shear test, which is usually used to estimate the shear strength of rocks without confinement, was examined in this study to directly determine the adfreezing strength. It is measured as the shear strength of the frozen soil-structure interface under unconfined conditions. Different soils of silica sand, field sand, and field clay were prepared inside the steel and concrete ring structures. Soil and ring structures were frozen at the target temperature for more than 24 h. A punch shear test was then conducted. The test results show that the adfreezing strength increased with a decrease in the target temperature and increase in the initial water content, owing to the increase in ice content. The adfreezing strength of field clay was the smallest when compared with the other soil specimens because of the large amount of unfrozen water content. The field sand with the larger normalized roughness showed greater adfreezing strength than the silica sand with a lower normalized roughness. From the experiment and analysis, the applicability of the punch shear test was examined to measure the adfreezing strength of the frozen soil-structure interface. To find a proper sample dimension, supplementary experiments or numerical analysis will be needed in further research.

• 한국재료학회지
• /
• 제2권6호
• /
• pp.436-442
• /
• 1992

레이저빔에 의한 철강재의 Ti 표면합금화에 미치는 C함량의 영향을 관찰하였다. 철강재상에 Ti 코팅 후 레이저빔 조사시 질소를 취입가스로 사용하면 부분적으로 TiN과 F$e_2$Ti가 형성된다. 저탄소강의 경우 Ti함량의 증가에 따라 임계냉각 속도의 증가로 마르텐사이트화가 억제된다. 고탄소강의 경우 Ti의 함량이 1.5%정도 임에도 훼라이트 조직이 형성되지 않고 마르텐사이트 조직이 형성되어 경화된다. 그리고 고탄소강의 Ti 표면합금층 형성에 부분적인 TiC의 석출이 있어 더욱 경도를 증가시키는 것으로 생각된다.

• Geomechanics and Engineering
• /
• 제19권4호
• /
• pp.307-314
• /
• 2019

Light construction waste (LCW) particles are pieces of light concrete or insulation wall with light quality and certain strength, containing rich isolated and disconnected pores. Mixing LCW particles with soil can be one of the alternative lightweight soils. It can lighten and stabilize the deep-thick soft soil in-situ. In this study, the unconfined compressive strength (UCS) and its mechanism of Construction Waste Stabilized Lightweight Soil (CWSLS) are investigated. According to the prescription design, totally 35 sets of specimens are tested for the index of dry density (DD) and unconfined compressive strength (UCS). The results show that the DD of CWSLS is mainly affected by LCW content, and it decreases obviously with the increase of LCW content, while increases slightly with the increase of cement content. The UCS of CWSLS first increases and then decreases with the increase of LCW content, existing a peak value. The UCS increases linearly with the increase of cement content, while the strength growth rate is dramatically affected by the different LCW contents. The UCS of CWSLS mainly comes from the skeleton impaction of LCW particles and the gelation of soil-cement composite slurry. According to the distribution of LCW particles and soil-cement composite slurry, CWSLS specimens are divided into three structures: "suspend-dense" structure, "framework-dense" structure and "framework-pore" structure.

• 한국가정과교육학회지
• /
• 제28권2호
• /
• pp.1-19
• /
• 2016

본 연구는 2009 개정 현행 가정과 교육과정에서 실행할 수 있는 세 행동체계 중심의 교육과정 안을 개발하여 새로운 관점에서 큰 어려움 없이 개별 가정과 교사가 활용할 수 있도록 돕고자 하였다. 세 행동체계에 대한 본질적 이해는 2009 개정 현행 교육과정에서는 물론 2015 개정 교육과정의 실행에도 필수적으로 요구되는 부분이다. 이에 본 연구에서는 2명의 개발진, 3명의 검토진, 15명의 전문가 협의진을 구성하고 3차안에 걸쳐 세 행동체계 중심 교육내용 체계를 개발하였다. 1차안은 의, 식, 주, 가족 아동, 소비 가정경역과 세 행동체계를, 2차안은 2009 개정 현행 가정과 교육과정의 중단원 수준에서 세 행동체계를, 최종안은 2009 개정 현행 가정과 교육과정의 소단원 수준에서 세 행동체계를 접목하여 내용체계를 개발하였다. 이 교육과정의 실행을 위한 지원체계를 모색하여 제시하였다.

• 한국주조공학회지
• /
• 제7권4호
• /
• pp.352-357
• /
• 1987

Recently there were many studies on the development of cast iron for increasing strength, thermal resistance and mechanical properties, etc. The effects on mechanical properties and variation of solidification structure of hypo-eutectic cast iron was investigated when Ni(Al) was added with a fixed quantity of Al(Ni) content. The conclusions are as follows. 1) Tensile strength was the maximum(over 41 kg/ $mm^2$) when Al is added about 0.72%. 2) Torsional strength and angle were increased with increasing Al content and represents maximum value, when Al and Ni content are 1.5 and 2.0%. 3) With increasing Ni content, tensile strength decreased because of the effect of graphite coarsening. But torsional strengths were increased with the appropriate addition of (Ni%+Al%) content because of the effect of strengthened matrix.

• ETRI Journal
• /
• 제22권2호
• /
• pp.32-42
• /
• 2000

The existing multi-dimensional index structures are not adequate for indexing higher-dimensional data sets. Although conceptually they can be extended to higher dimensionalities, they usually require time and space that grow exponentially with the dimensionality. In this paper, we analyze the existing index structures and derive some requirements of an index structure for content-based image retrieval. We also propose a new structure, for indexing large amount of point data in a high-dimensional space that satisfies the requirements. in order to justify the performance of the proposed structure, we compare the proposed structure with the existing index structures in various environments. We show, through experiments, that our proposed structure outperforms the existing structures in terms of retrieval time and storage overhead.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.239-243
• /
• 1996

In this paper, we have tried to focus on the optimum conditions of crystal structure parameters on YBCO high Tc oxide-superconductor as an excel lent electronic parts. When we verify the characteristic improvement of superconductance and accurate reproduction and so forth, we have made use of RIETAN. We have varied the lattice constant with oxygen content from 6.0 to 7.0 as for transition of orthogonal structure and tetragonal structure for the superconductor. As the result of above, we have preyed that transition from orthogonal structure to tetragonal structure is made at the point of 6.6(oxygen content) by using the simulation.

• 폴리머
• /
• 제38권3호
• /
• pp.265-271
• /
• 2014

In order to investigate the characteristics of the gradient fluorinated polyacrylate and polyurethane latex blend films, the fluorinated polyacrylate emulsion and the polyurethane emulsion were synthesized, and then the both emulsions were blended at a series of ratios. The effects of content of the fluorinated polyacrylate on the gradient structure and surface property of the blended films were assessed by AFM, XPS, SEM-EDX and surface free energy measurements. It appeared that, while the content of the fluorinated polyacrylate latex was up to 30%, the fluorinated polyacrylate particles were selectively gathered on the film-air (F-A) and film-glass (F-G) interfaces at room temperature. When the content of the fluorinated polyacrylate was under 30%, the gradient structure of fluorinated component was not evident. The further increasing of fluorinated polyacrylate in the mixed system facilitated the formation and enlargement of gradient structure, but the adhesion of film decreased a little.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.25-30
• /
• 2004

본 논문에서는 방전유지전극사이에 유전체 공극이 존재하는 능선형상의 상판구조를 제안하였다. 이 구조는 상판의 방전 유지 전극사이 강한 전계를 이용하여 동작전압을 감소시킬 수 있고 이로 인한 Xe의 주입비율을 증가시켜 휘도 및 발광효율을 향상시킬 수 있는 구조이다. 실험에서는 6인치 테스트 패널을 사용하였으며 기체 압력을 450 torr로 유지하면서 Xe 함량을 10 %, 15 %, 20 %, 30 %, 50 %로 변화하여 실험하였다. 실험결과, 10 %의 동일한 Xe 기체를 주입한 결과, 제안된 구조를 적용할 경우, 방전개시전압과 방전유지전압이 각각 79 V, 74 V 감소하였으며 10 %의 Xe을 주입한 일반적인 구조와 50 %의 Xe을 주입한 제안된 구조의 휘도와 발광효율 비교에서 본 논문에서 제안한 구조가 비슷한 구동전압 범위에서 일반적인 구조에 비하여 효율은 50.9 % 향상되었고, 휘도는 33 % 향상됨을 알 수 있었다.

• 한국육종학회지
• /
• 제43권1호
• /
• pp.14-22
• /
• 2011

In this study, 15 simple sequence repeat (SSR) markers were used to analyze the population structure of 55 mungbean accessions (34 from South Asia, 20 from West Asia, 1 sample from East Asia). A total of 56 alleles were detected, with an average of 3.73 per locus. The mean of major allele frequency, expected heterozygosity and polymorphic information content for 15 SSR loci were 0.72, 0.07 and 0.33 respectively. The mean of major allele frequency was 0.79 for South Asia, and 0.74 for West Asia. The mean of genetic diversity and polymorphic information content were almost similar for South Asian and West Asian accessions (genetic diversity 0.35 and polymorphic information content 0.29). Model-based structure analysis revealed the presence of three clusters based on genetic distance. Accessions were clearly assigned to a single cluster in which >70% of their inferred ancestry was derived from one of the model-based populations. 47 accessions (85.56%) showed membership with the clusters and 8 accessions (14.54%) were categorized as admixture. The results could be used to understanding the genetic structure of mungbean cultivars from these regions and to support effective breeding programs to broaden the genetic basis of mungbean varieties.