• Asia pacific journal of information systems
• /
• v.26 no.1
• /
• pp.124-142
• /
• 2016

Companies operating in social network platforms continue to improve and expand their marketing techniques. This study examines the practice of "gating", which involves virtual barriers between social network users and company content. Gates demand mandatory user endorsements, in the form of a Facebook "Likes", Twitter "retweets" etc., to gain access to company content, such as coupons and rewards,. Gating practices demand a mandatory endorsement before any content consumption takes place. Thus, while user endorsements are assumed to arise voluntarily from trusted known sources, gating practices would appear to violate this assumption. However, whether this violation lessens the effectiveness of gating practices still requires empirical validation. We investigate this question through the use of a unique panel data set that includes data on "like" endorsements obtained from a number of real-world Facebook business pages. Results of the study show that gating practices are effective for endorsement solicitation; however, gates may interfere with more traditional marketing activities.

• Korean Journal of Pharmacognosy
• /
• v.8 no.2
• /
• pp.69-72
• /
• 1977

The investigation is involved with the development of the new method of decoction preparation in order to prevent the loss of volatile oil from crude drugs. Volatile oil in crude drug containig volatile oil ranged from 1 to 2.2% in content. Volatile oil content in crude drung prescription which main component is a crude drug containing volatile oil was $0.11{\sim}0.39\;ml$. It was found that traditional method of decoction preparation has caused to lose almost all of the volatile oil. Application of method of Pharmacopoea (Kp II) for the preparation of decoction prevented the loss of volatile oil from one half to two-third of its content. The method of Pharmacopoea to which air condenser was attached could completely prevented the loss of volatile oil from the preparation.

• Journal of Nutrition and Health
• /
• v.8 no.2
• /
• pp.27-30
• /
• 1975

This investigation was designed to determine the influence of light on the changes of capsaicin, carotenoid and sugar in hot green pepper fruits during the after-ripening period. The results were as follows; 1. In capsaicin content, the sample in light was increased about twice of that of the sample under the darkness. 2. In total carotenoid content, both samples were increased in the same trend. And so, it might be able to assume that carotenoid pigments were produced without the light. 3. In sugar content, the sample in light was more rapidly decreased than that of the sample in darkness.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.167-176
• /
• 1994

The microcapsules of amoxicillin using stearyl alcohol and polyethyleneglycol 8000 (PEG 8000) were prepared by a emulsion melted-cooled process in water phase. The size distribution, dissolution test, observation with SEM and in vivo test were investigated. The microcapsules obtained were spherical, uniform and free flowing particles. The release of drug from microcapsule was increased in proportional to the content of PEG 8000. As the PEG 8000 content increased, the particle size of microcapsule was decreased. Sanning electron micrograph study revealed that microcapsules had comparatively rough surfaces as drug content was increased. The $AUC_{0-12}$ after administration of amoxicillin microcapsules was more increased 40% as compared with the AUC after administration of amoxicillin powder in rabbits.

• Journal of Pharmaceutical Investigation
• /
• v.11 no.1
• /
• pp.6-14
• /
• 1981

Safety, efficacy and reliability are the three basic criteria that define the quality of any well-designed pharmaceutical dosage form. Content uniformity directly bears on each of the three criteria defining the quality of drug product. Effect of manufacturing methods and physicochemical properties of the drug on content uniformity of tablets was investigated. Chlorpheniramine maleate and micronized salicylic acid were used as main ingredients. Three different methods for incorporation of main ingredients with diluents were solvent mixing method, geometric dilution method, and simple mixing method. The solvent mixing method was the best one of the three.

• Advances in concrete construction
• /
• v.4 no.4
• /
• pp.243-261
• /
• 2016

This research study focuses on utilizing sandstone which is overburden waste rock in coal mines to use in concrete as a replacement of fine aggregate. Physical properties of sandstone like water absorption, moisture content, fineness modulus etc., were found to be similar to conventional fine aggregate. Scanning Electron Microscope (SEM) analysis was carried out for analysing elemental composition of sandstone. There was no sulphur content in sandstone which is a good sign to carry the replacement. Fine aggregate was replaced with sandstone at 25%, 50%, 75% and 100% by volume and moulds of concrete cubes and cylinders were prepared. Compressive strength of concrete cubes was tested after 3, 7 and 28 days and split tensile & flexural strength was determined after 28 days. The strength was found to be increasing marginally with increase in sandstone content. Fine aggregate that was replaced by 100% sandstone gave highest strength among all the replacements for the compressive, split tensile and flexural strengths. Though increase in strength was marginal, still sandstone can be an effective replacement for sand in order to save the natural resource and utilize the waste sandstone.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.2
• /
• pp.72-75
• /
• 1986

A convenient high performance liquid chromatographic method was established for the quantitative determination and content uniformity test of aclatonium napadisilate preparation. This method was more simple to make the sample solution for injection, and easy to determine the content in the preparation. Aclatonium napadisilate was chromatographed using a $Lichrosorb-NH_2$ column $(4mm\;{\times}\;25\;cm$, and acetonitrile-water mixture (83:17) as an eluent at a flow rate of 1.8 ml/min. RI-detector response was linear over a range of $0.5{\sim}2.0%$ aclatonium napadisilate under above conditions. Reproducibility studies gave relative standard deviation of 1.29%.

• Journal of Welding and Joining
• /
• v.5 no.3
• /
• pp.38-45
• /
• 1987

An investigation was conducted to find out the factors influencing on the impact toughness of austenitic-and duplex stainless steel weld metal. Various welding process with commerically available consumables was adopted to get weld doposited metal. The oxygen content of each weld metal was very sensitiive to welding process, involving flux composition, shielding gas and structural features. The results of this study show tat the content of oxygen as an oxide inclusion significantly affects impact toughness, and .delta.-ferrite distribution is also correlated with resultant toughness value.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.135-151
• /
• 1982

In order to investigate the effectiveness of Osmose process for the practical treatment of wood this study has been made using water soluble preservatives such as Malenit and chromated zinc chloride. The results obtained in this investigation are as follows: 1. The penetration of Malenit in sapwood has been observed deeper than that of chromated zinc chloride for all species tested in this investigation. 2. The penetration of preservatives applied in soft wood, ie. Pinus densiflora and Larix leptolepis has been observed better results than that of hard wood, i.e., Quercus accutissima and Carpinus laxiflora. 3. The longer stack covering, despite of preservatives applied and size of wood tested, has given better penetration for all species tested, and the fastest diffusion has been occured in 15 days from they day started. Following after 15 days diffusion had gradualy become slower. 4. The length of time needed for effective penetration has taken 45 days for all species tested, reaching twenty millimeters (20mm) in depth in case of Malnit, that means also more than 50% of penetration into sapwood portion. However it has taken 45 days fer Pinus densiflora and Larix leptolepis, reaching fifteen millimeters (15mm) and 60 days for Quercus accutissima and Carpinus laxiflora, reaching same fifteen millimeters in case of chromated zinc chloride, that means also less than 50% (except 50% for Larix) of penetration into sapwood portion. 5. Deeper penetration of preservatives from the wood surface has been observed in the larger wood than the smaller wood for all species tested, although the penetration ratio between the width of sapwood and the length penetrated has been observed smaller in larger wood than smaller wood. 6. The relation between moisture content of wood and the penetration of preservatives into wood tested has shown the linear regression, that is, the more moisture content brought the deeper penetration. 7. Following the result obtained at this investigation osmose process with Malenit applied has indicated as a useable process for the none pressure treatment of wood.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.615-619
• /
• 2019

Various fluorides, i.e., CaF₂, Na₃AlF₆, K₂SiF₆, MnF₃, MgF₂, were added to the flux cored wire, and their effects on the oxygen content of the weld metal were investigated. The investigation showed that the oxygen content of weld metal was not influenced by the type of metallic elements in the fluoride; rather, it was influenced by the stability of the arc during welding. While the wire containing MgF₂ showed the most stable arc and the least amount of oxygen in the weld metal, the wire containing MnF₃ showed the least stable arc and the greatest amount of oxygen. Since the deoxidation of the weld metal was not affected by the deoxidation elements, such as Ca and Mg, it was possible to predict the oxygen content of the weld metal by the equilibrium Si-Mn deoxidation thermodynamic model.