• Safety and Health at Work
• /
• v.5 no.4
• /
• pp.169-174
• /
• 2014

We have been examining the issue of healthcare workers' exposure to antineoplastic drugs for nearly a decade and have observed that there appears to be more publications on the subject matter originating from Europe than from North America. The concern is that findings from Europe may not be generalizable to North America because of differences in handling practices, regulatory requirements, and training. Our objective was to perform a literature review to confirm our observation and, in turn, identify gaps in knowledge that warrants addressing in North America. Using select keywords, we searched for publications in PubMed and Web of Science. All papers were initially classified according to the originating continent and then categorized into one or more subject categories (analytical methods, biological monitoring, occupational exposure, surface contamination, and probability of risk/exposure). Our review identified 16 papers originating from North America and 55 papers from Europe with surface contamination being the subject matter most often studied overall. Based on our results, we are of the opinion that North American researchers need to further conduct dermal and/or urinary drug contamination studies as well as assess the exposure risk faced by healthcare workers who handle antineoplastic drugs. Trends in exposure levels should also be explored.

• The Journal of Information Technology
• /
• v.7 no.3
• /
• pp.113-118
• /
• 2004

Recently, diagnosis techniques have been investigated to detect a partial discharge associated with a dielectric material defect in a high voltage electrical apparatus. However, the properties of detection technique of PD aren't completely understood because the physical process of PD. Therefore, this paper analyzes the process on Surface Discharge of Polymer Insulator using Wavelet transform. Wavelet transform provides a direct quantitative measure of spectral content in the time frequency domain. As it is important to develop a non-contact method for detecting the Contamination Degree, this research analyzes the electromagnetic waves emitted from PD using Wavelet transform. This result experimentally shows the process of PD as a two-dimensional distribution in the time-frequency domain. The method is shown to be useful for detecting prediction of contamination degree.

• Journal of Radiation Protection and Research
• /
• v.13 no.1
• /
• pp.21-30
• /
• 1988

The 6 MV photon beam of a linear accelerator (Mevatron 67) was studied for electron contamination. The surface dose, attributable almost entirely to contamination electrons, has a linear dependence on field width for square fields and an inverse square dependence on distance from the bottom of the fixed head assembly. Build-up and surface dose measurements were taken with and without an acrylic blocking tray in place. Further measurements were made with a copper filter designed to reduce secondary electrons emitted by photon interactions with the acrylic tray. The results are discussed in relation to skin sparing effect for radiation therapy patients. To achieve the maximum skin sparing effect, the selection of the optimum SSD and TSD is needed.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.512-521
• /
• 2015

In this research, environmental friendly organic acid containing microetching system to improve adhesion strength between photoresist resin and Copper Clad Laminate(CCL) was developed without using strong oxidant $H_2O_2$. Etching rate and surface contamination on CCL were examined with various etching conditions with different etchants, organic acids and additives. to develope an optimum microetching condition. Etching solution with 0.04 M acetic acid showed the highest etching rate $0.4{\mu}m/min$. Etching solution with the higher concentration of APS showed the higher etching rate but surface contamination on CCL is very serious. In addition, stabilizer solution also played an important role to control the surface contamination. As a result of research, the etching solution containing 0.04 M of acetic acid, 0.1 M of APS with 4 g/L of stabilizer solution(ST-1) was best to improve adhesion between CCL and photoresist resin as well as showed the most clean and rough surface with the etching rate of $0.37{\mu}m/min$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.5
• /
• pp.789-797
• /
• 2015

The concentrations of trace metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) were determined in 49 surface sediment samples collected in Yeoja and Gangjin Bays on the south coast of Korea, which contain many shellfish farms, in order to assess the contamination level and to understand the spatial distribution of trace metals. The average metal concentrations in the surface sediments of both bays decreased in the order Fe > Mn > Zn > Cr > Pb > Cu > As > Cd > Hg. There were no differences in metal concentrations between shellfish farms and reference sites. The metal concentrations were significantly higher in Gangjin Bay than in Yeoja Bay. Notably, the Cu, Cd, and Hg concentrations were nearly twice as high in Gangjin Bay as in Yeoja Bay. A multivariate analysis showed a strong correlation among Fe, Mn, Zn, Pb, and Cr in the sediments of both bays, implying that the metal concentrations in the sediments in the study area were mainly dependent on natural processes, such as crustal components and diagenesis. Based on the geoaccumulation index and marine sediment quality guidelines (SQGs), the surface sediments in Yeoja and Gangjin Bays are not polluted by trace metals.

• Journal of Energy Engineering
• /
• v.13 no.2
• /
• pp.93-100
• /
• 2004

The smear media possible to sampling and radiation detection was prepared and evaluated for the surface contamination using indirect method. The films were made by impregnating Cerium Activated Yttrium Silicate (CAYS) in a polysulfone membrane. The membranes used solution as a dimethylformamide (DMF) and methylene chloride (MC), polysulfone as a polymer matrix and CAYS as a inorganic scintillator. The proximity membranes were prepared with single- and double-layered structure. The solidified methods were immersion to the nonsolvent bath such at water and ethanol and solvent evaporation. The measurement of the photon produced by interaction with radiation and inorganic scintillator used a photomultiflier tube (PMT), amplifier, and counter. In the comparison with the low background alpha/beta counter, the counter rate using inorganic scintillator proximity membrane for the $\^$14/C surface contamination was about 50%. Also. the $^3$H counting results revealed that the prepared membranes were efficient to monitor the surface contaminated with the low energy be-ray emitter nuclides.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.146-152
• /
• 2008

This study was aimed to understand the effects of perturbed floor surface on human postural stability while standing. Ten subjects were asked to stand quietly on the surface with two angles of inclination ($0^{\circ}$ and $5^{\circ}$), two contamination conditions (dry and oil-contaminated), and three commercial floor materials (ceramic tile, coated wood, and vinyl tile). During each trial, a force plate with data acquisition systems was used to collect subject's center of pressure (COP) position. Measured COPs were then converted into the length of postural sway path in both subject's anterior-posterior (AP) and medio-lateral (ML) axis. Results showed that the length of sway path in ML axis was significantly affected by the angle of inclination and the type of floor material. The sway length was increased significantly at the inclination angle of $5^{\circ}$ and on the vinyl tile, respectively. The contamination condition, however, did not significantly affect the postural sway length in both AP and ML axis. The results imply that a proper treatment of floor surface and material is critical to preserving postural balance while standing.

• Fisheries and Aquatic Sciences
• /
• v.13 no.3
• /
• pp.236-243
• /
• 2010

Fecal sterols, nonylphenolic compounds (NPs), and polycyclic aromatic hydrocarbons (PAHs) were determined in surface water from Masan Bay and its adjacent rivers in February 2005. Concentrations of coporstanol (Cop), an indicator of fecal pollution, in surface water ranged from <10 to 13,853 ng/L, and concentrations of nonylphenol, the most toxic of the NPs, ranged from 10.2 to 481 ng/L, and concentrations of PAHs ranged from 8.61 to 223 ng/L. The concentrations of the compounds measured in this study were lower than or comparable to those at other locations in Korea and other countries. The contamination of Cop and PAHs in surface water was associated with the discharge from rivers passing through cities and/or industrial complexes. The NP contamination was associated with wastewater treatment plant (WWTP) effluents through outfalls as well as riverine discharge. Compared to ecotoxicological values, the concentrations of NPs from rivers, the mouths of rivers, and WWTP outfall areas exceeded guidelines, suggesting that hot spot areas may pose a potential risk to sensitive species.

• Congress of the korean instutite of fire investigation
• /
• 2010.06a
• /
• pp.43-55
• /
• 2010

In this study, the risk on the contamination of the bracket insulators were investigated and surface discharge process leading to the fire is verified. If the insulator surface is coated by the grease, dust and contaminants likely to be attached. Leakage current to flow easily. In these results, the improvement of three methods have been proposed for the apply to the field. It is very important to ensure the safety for the service of electrical safety. For the public service, it's important to safety of railroad. Through this study, it is expected to be safer.

• Ocean Science Journal
• /
• v.41 no.4
• /
• pp.261-290
• /
• 2006

The concentrations of man made radionuclides in surface seawater since early '60s are here reported as measured in Italy and Japan. Most of the data refers to $^{90}Sr$ and $^{137}Cs$, but occasionally the concentrations of $^{89}Sr$ and $^{134}Cs$ in some Italian samples are also given. The main sources of man made radionuclides were the global fallout produced by the nuclear weapon tests and the Chernobyl accident. The respective contributions to the contamination of surface seawater around both countries are discussed.