• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.329-334
• /
• 2003

To study the interaction between rice weevil and storage molds, the preference of rice weevil to the four mold species (Aspergilus candidus, A. niger, A. flavus and Penicillium spp.) and the resulting reproduction of the rice weevil were observed. The rice weevil preferred rice grains contaminated with the molds to autoclaved ones regardless of the mold species tested. Among the four mold species, A. candidus and Penicillium sp. were highly preferred than the others. Reproduction of the rice weevil was higher on the grains contalminated with A. candidus and Penicillium sp., than on autoclaved ones, but was lower on the grains contaminated with A. flavus. The partial disagreement between preference and reproduction of the rice weevil might be a suggestion that both the weevil behavior adapting nutritional requirements and the process of the long intensive coadaptation of the rice weevil and storage molds requiring similar moisture niche are the major components of the population interaction between the weevil and molds.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.149-154
• /
• 2015

In recent years, immobilization agents were introduced into organic contaminated soil remediation and more and more materials were screened and used as the immobilizing carrier. However, effect of the decomposition of the immobilizing carrier on the bioremediation was rarely concerned. Therefore, the decomposition experiment of immobilizing carrier -corncob was carried out in the lab with the efficient degradation fungi - Mucor mucedo (MU) existing, and polycyclic aromatic hydrocarbons (PAHs) residues E4/E6 of the dissolved organic matter and microbial diversity during the decomposition process were studied. The results showed that: a) during the decomposition, the degradation of pyrene (Pyr) was mainly in the first 28 d in which the content of extractable Pyr decreased rapidly and the highest decrease was in the treatment with only MU added. b) Anslysis of E4/E6 changes showed that rich microorganisms could promote aromatization and condensation of humus. c) From the diversity index analysis it can also be seen that there is no significant difference in effects of PAHs on the uniformity of microorganisms. These results will not only be useful to have a better understanding of the bioavailability of contaminants adsorbed to biodegradable carriers in PAHs contaminated soil remediation, but also be helpful to perfect the principle of immobilized microbial technique.

• Journal of Microbiology
• /
• v.44 no.4
• /
• pp.403-408
• /
• 2006

The purpose of this study was to determine the efficacy of a nucleic acid sequence-based amplification (NASBA) method of detecting noroviruses in artificially and naturally contaminated shellfish. We used 58 fecal samples that tested positive for noroviruses with electron microscopy (EM) to develop an NASBA assay for these viruses. Oligonucleotide primers targeting the polymerase coding region were used to amplify the viral RNA in an isothermal process that resulted in the accumulation of RNA amplicons. These amplicons were detected by hybridization with digoxigenin-labeled oligonucleotide probes that were highly specific for genogroup I (GI) and genogroup II (GII) of noroviruses. The expected band of 327bp appeared in denaturing agarose gel without any nonspecific band. The specific signal for each amplicon was obtained through Northern blotting in many repeats. All fecal samples of which 46(79.3%) belonged to GII and 12(20.6%) belonged to GI were positive for noroviruses by EM and by NASBA. Target RNA concentrations as low as 5pg/ml were detected in fecal specimens using NASBA. When the assay was applied to artificially contaminated shellfish, the sensitivity to nucleic acid was 100pg/1.5g shellfish tissue. The potential use of this assay was also confirmed in naturally contaminated shellfish collected from different ponds in Guangzhou city of China, of which 24 (18.76%) out of 128 samples were positive for noroviruses; of these, 19 (79.6%) belonged to GII and 5 (20.4%) belonged to GI. The NASBA assay provided a more rapid and efficient way of detecting noroviruses in fecal samples and demonstrated its potential for detecting noroviruses in food and environmental samples with high specificity and sensitivity.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.15-19
• /
• 2014

Spilling pollutants and its contamination to the ground have serious impact to public resulting in various research about remediation techniques. In this study, the use of amphiphilic block copolymer for remediation was investigated with a series of laboratory tests on removal of hydrophobic contaminant in soil. Four types of amphiphilic block copolymer were developed and the efficiency of the cleaning was compared with surfactant using arbitrary diesel-contaminated soils. The results of the study show that the use of amphiphilic polymer in the soil washing process significantly enhanced the remediation of the contaminated soil and a potential of new methodology of eco-friendly remediation.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.94-103
• /
• 2014

In this study washing efficiency and desorption isotherms for heavy petroleum oil (HPO), Zn, and Pb bound to complex contaminated soils were examined using various soil flushing agents. Sodium dodecyl sulfate (SDS), methanol, ethylene diamine tetraacetic acid (EDTA), and citric acid were selected as soil flushing agents. 3% (w/v) and 4% SDS showed the highest removal efficiency for HPO, but the difference was not statistically significant (p > 0.05). Thus, 3% SDS was chosen as the best soil flushing agent for HPO. In the case of heavy metals, 0.1-M EDTA showed the highest removal efficiencies. But 0.05-M citric acid was selected due to its economic and eco-friendly strengths. The desorption isotherms obtained using Freundlich and Langmuir models indicated that the maximum desorption characteristics ($K_F$ and $Q_{max}$) of HPO with 4% SDS and 90% methanol and heavy metals with 0.1-M EDTA and 0.1-M citric acid, respectively, were markedly lower than in other cases. In addition, when 4% SDS and 90% methanol were used for HPO in the range of $C_e$ higher than 600 mg/L, and when 0.1M citric acid and 0.1M EDTA were used for Zn and Pb in the range of $C_e$ higher than 300 and 100 mg/L, respectively, the distribution constant converged to certain levels. Thus, constant values of $K_U$ and $K_L$ were determined. It was found that these constants represent the maximum desorption capacity and they can be used as distribution coefficients of desorption equilibrium for the flushing agents. The results of this study provided fundamental information for the selection of the best agents as well as for the process design and operation of soil washing/soil flushing of complex contaminated soils.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.1-5
• /
• 2011

Arsenic is one of the most abundant contaminant found in waste mine tailings and soil around refinery, Because of its carcinogenic property, the countries like United States of America and Europe have made stringent regulations which govern the concentration of arsenic in soil. The study focuses on solidification/stabilization for removal of arsenic from soil. Cement was used to solidify/stabilize the abandoned soil primarily contaminated with arsenic (up to 68.92 mg/kg) in and around refinery. Solidified/stabilized (s/s) forms in the range of cement contents 5-30 wt % were evaluated to determine the optimal binder content. Revised Korean standard leaching tests (KSLT), toxicity characteristic leaching procedures (TCLP), Old Korea standard leaching test and revised Korea standard leaching test were used for chemical characterization of the S/S forms. The addition of 10 % cement remarkably reduced the leachability of arsenic in contaminated soil. The concentration of As in leachate of TCLP, KSLT, and old KSLT for soil are below the standard. However that in leachate of revised KSLT is above the standard. Because of extraction fluid used in revised KSLT is very strong acid. It is arsenic in s/s with binder should be exhaustingly leached. Therefore S/S process would not be available for As treatment in soil in Korea.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.37-48
• /
• 2014

Lab scale rhizofiltration by using four plants was performed to investigate the uranium removal efficiency from groundwater. Lettuce (Lactuca sativa L.), Chinese cabbage (Brassica campestris L.), radish sprouts (Raphanus sativus L.) and buttercup (Oenanthe javanica) were cultivated during 3 weeks in the phytotron. Glass jar ($12cm{\times}12cm{\times}8cm$ for each), containing 350 ml of the artificially uranium contaminated solution was used for 72 hours of the rhizofiltration. In experiments with different initial uranium concentration ($18.00{\mu}g/L$, $31.00{\mu}g/L$, $84.00{\mu}g/L$ and $116.00{\mu}g/L$) in solution, more than 70% of the initial uranium were removed by using lettuce, Chinese cabbage and radish sprouts and the residual uranium concentration in solution maintained lower than USEPA water tolerance limit ($30{\mu}g/L$). From the rhizofiltration experiments at various pH conditions, the highest uranium removal for all four plants was acquired at pH 3 in solution. Rhizofiltration experiments testing two field samples of groundwaters having high uranium concentrations ($86.00{\mu}g/L$ and $173.00{\mu}g/L$) were duplicated and more than 83% of the initial uranium were removed from the groundwater within 72 hours of rhizofiltration by using radish sprouts, which, suggests that the rhizofiltration can be a useful process to remediate uranium contaminated groundwater in the field. After the rhizofiltration experiment, the SEM and EDS analyses for the root surface of the radish sprouts were conducted, suggesting that the main mechanism of the rhizofiltration for the removal of uranium from groundwater would be surface precipitation on the root surface of the plant.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.4
• /
• pp.27-32
• /
• 2017

In this study, a remedial investigation using reductive stabilization was conducted to treat Cr(VI)-contaminated soil. The influences of various operational parameters, including reaction time and the mass of ferrous iron, were also evaluated. The study site was contaminated with a large amount of Cr(III) and Cr(VI), and the selected treatment method was to stabilize Cr(VI) with ferrous iron, which reduced Cr(VI) to Cr(III) and stabilized the chromium, although a greater mass of ferrous iron than the stoichiometric amount was required to stabilize the Cr(VI). However, some Cr(III) re-oxidized to Cr(VI) during the drying process, and addition of a strong reducing agent was required to maintain reducing conditions. With this reducing agent, the treated soil met the required regulatory standard, and the mass of Cr(III) re-oxidized to Cr(VI) was significantly reduced, compared to the use of only Fe(II) as a reducing agent.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.6
• /
• pp.36-46
• /
• 2021

The Soil Health Index (SHI) developed by Park et al. (2021) is used to evaluate soil health on remediated soils collected from several remediation project sites and monitored the changes of SHI during the remediation process of land farming, soil washing, and thermal desorption. In the case of land farming, the soils remediated below a legal standard didn't show any significant changes in indices of SHI except the downgrade of available phosphate from medium to a low level. The SHI scores were ranged from 52 to 56 in the contaminated soil and 54 to 57 in the remediated soil. With soil washing, bulk density changed from high to a low level, and available phosphate was lowered from medium to low level. As the SHI scores were evaluated as 58 to 63 for contaminated soil and 38 to 42 for remediated soils. For thermal desorption, soil respiration rate was reduced from high to low level and SHI was scored as 50 to 51 for contaminated soils and 43 to 47 for remediated soils. Even though any abrupt changes of the SHI in remediated soils were not identified in the soils used in this study, it is expected that soil in different conditions such as types and concentrations of contaminant and soil characteristics would result in distinguished changes of the SHI. There is a room for more studies collect diverse information on SHI across the country.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.665-668
• /
• 2006

Sodium is a serious contamination in LTPS TFT process. It causes the abnormal characteristics of TFT in operation. Contaminated areas can be seen in SEM images, but EDX measurements do not have adequate sensitivity to confirm the presence of superficial sodium residues. We employed SIMS as a fast analysis method to map the non-uniform distribution of sodium on the surface. SIMS can also indicate the thickness of the contamination.