• 제목/요약/키워드: Contaminant Sources

검색결과 78건 처리시간 0.025초

서울특별시 지하철 A설계구간에서의 지하수 수질 및 오염특성 (Groundwater Quality and Contamination in the 'A' section of Seoul Metropolitan Subway)

  • 이병선;우남칠
    • 지질공학
    • /
    • 제12권4호
    • /
    • pp.379-394
    • /
    • 2002
  • 이 연구는 서울특별시 지하철 A설계구간에서, 현재 시점의 지하수 수질 및 오염을 파악함으로써, 추후 지하철 공사로 인한 수질 악화 발생시, 이에 과학적으로 대처하기 위해 수행되었다. A설계구간을 따라 총 21개 시추공에서 지하수 시료를 채취.분석하였으며, 그 결과 배경수질은 주로 $Ca-HCO_3$ 유형으로 나타났다. 전체시료 가운데, 국내 먹는물 수질기준을 초과하지 않은 시료는 1개이며, 나머지 20개 시료는 $SO_4$, Cd, Pb, Fe, Mn, Al, F, $NO_3-N$ 등이 먹는 물 수질 기준치를 초과하여 있었다. 오염의 형태는 일부 시료에서 몇몇 화학 원소의 농도가 나머지 시료에서의 농도보다 크게 나타나는 점오염의 형태를 띄었다. 화학분석 자료와 포화지수 분석을 통하여, 지하에 매립된 물질과 지표 퇴적물이 일차적인 오염원임을 추정하였다. 요인분석 결과, 연구지역 내 지하수 시료의 수리화학적 특성의 약 47%가 오염 인자에 의해 영향을 받고 있는 것으로 나타났다.

GIS를 이용한 경기도 화남2지구의 지하수오염 예측에 관한 연구 (A Study on the Prediction of Groundwater Contamination using the GIS in Hwanam 2 Sector, Gyeonggi Province, Korea)

  • 손호웅
    • 공학논문집
    • /
    • 제5권1호
    • /
    • pp.89-107
    • /
    • 2004
  • 본 연구는 DRASTIC 모델에 구소선밀도, 토지이용 인자를 추가한 수정 DRASTIC 모델을 개발하여 경기도 화남2지구의 지하수오염 가능성을 예측하고자 하였다. 우리나라의 수리지질 환경에서 대수층은 대부분 암반 대수층인 점을 고려했을 때, 구조선밀도는 지하수 및 오염물질 유동에 직접적인 영향을 미치고, 토지이용은 점오염원 혹은 비점오염원의 영향을 간접적으로 반영할 수 있기 때문이다. 통계분석을 위하여 각 인자별 격자 레이어를 생성하고, 각각의 상관계수를 분석함으로써 신뢰도 여부를 판단하였다. 최종 결과물인 종합오염현황도는 수정 DRASTIC Potential과 여러 가지 오염원의 발생 부하량 값을 논리비교함으로써 수리지질학적인 측면에서의 오염가능성 지역과 수질측면에서의 오염가능성 지역을 예측할 수 있는 방안을 제시할 수 있었다.

  • PDF

Characterisation of fungal contamination sources for use in quality management of cheese production farms in Korea

  • Kandasamy, Sujatha;Park, Won Seo;Yoo, Jayeon;Yun, Jeonghee;Kang, Han Byul;Seol, Kuk-Hwan;Oh, Mi-Hwa;Ham, Jun Sang
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제33권6호
    • /
    • pp.1002-1011
    • /
    • 2020
  • Objective: This study was conducted to determine the composition and diversity of the fungal flora at various control points in cheese ripening rooms of 10 dairy farms from six different provinces in the Republic of Korea. Methods: Floor, wall, cheese board, room air, cheese rind and core were sampled from cheese ripening rooms of ten different dairy farms. The molds were enumerated using YM petrifilm, while isolation was done on yeast extract glucose chloramphenicol agar plates. Morphologically distinct isolates were identified using sequencing of internal transcribed spacer region. Results: The fungal counts in 8 out of 10 dairy farms were out of acceptable range, as per hazard analysis critical control point regulation. A total of 986 fungal isolates identified and assigned to the phyla Ascomycota (14 genera) and Basidiomycota (3 genera). Of these Penicillium, Aspergillus, and Cladosporium were the most diverse and predominant. The cheese ripening rooms was overrepresented in 9 farms by Penicillium (76%), while Aspergillus in a single farm. Among 39 species, the prominent members were Penicillium commune, P. oxalicum, P. echinulatum, and Aspergillus versicolor. Most of the mold species detected on surfaces were the same found in the indoor air of cheese ripening rooms. Conclusion: The environment of cheese ripening rooms persuades a favourable niche for mold growth. The fungal diversity in the dairy farms were greatly influenced by several factors (exterior atmosphere, working personnel etc.,) and their proportion varied from one to another. Proper management of hygienic and production practices and air filtration system would be effective to eradicate contamination in cheese processing industries.

농작물중(農作物中) 중금속오염도(重金屬汚染度)와 1일섭취량(日攝取量) 및 허용기준설정(許容基準設定)에 관(關)한 연구(硏究) (A Study on the Crops Pollution with Heavy Metal)

  • 염용태;배은상;윤배중
    • Journal of Preventive Medicine and Public Health
    • /
    • 제13권1호
    • /
    • pp.3-12
    • /
    • 1980
  • Certain heavy metals which may lead peoples to poisonous status are widely used in industry and their uses have been increasing along with rapid industrialization of this country. Such an increasement of metal uses aggravates the status of environmental pollution affecting foodstuffs which are the most important life supporting factor of animal and humanbeing. Concerning the safety measures to minimize food-borne transmission of such hazardous metals, surveillance is the backbone of them and probably more so with a potential problem such as intoxication. Theoretically, this surveillance should include the determination of levels of heavy metal toxicants in foods, the determination of food consumption patterns and typical total diet, and the estimation of total load of the metal contaminant from all sources of exposure including air, water, and occupational sources. In recent year, actually, such estimates on the total daily intake of some heavy metals from foods have been made in several developed countries and a wide variation of date by season, locality, and research method was recognized. Also in this country, this kind of research data is vitally needed to make up for the serious shortage or lack of references to estimate the total amount of heavy metal intake of the people. In this study, a modification model for estimation of the total daily intake of cadmium copper, nickel, zinc, and lead through foods was applied and concentrations of the above metals in crops cultivated in this country were measured with atomic absorption spectro photometer to get the following results. 1. Level of heavy metal concentration in crops Generally, the levels of such metals in essential crops such as rice, cucumber, radish. chinese cabbage, apple, pear, grape, and orange are similar or lower than those in Japan and other developed countries. By the way, a striking result on cadmium concentration was increasement of its concentration in rice from $0{\sim}0.035ppm$ in 1970 to 0.11ppm in this study. However, the value is still far below the. Japanese Permissible Lebel of 1.0ppm. 2. Estimation of total daily intake per capita from foods A new model for estimation was devised utilizing levels of metal concentration in foods, amount of food consumed, and other food factors. Based on the above method, the daily intake of cadmium was estimated to be $70.53{\mu}g/man/day$ in average which was as high as the Limit Value of ILO/WHO(up to $71.4{\mu}g/man/day$). Also, 3.89mg of Zinc, 1.65mg of cuppor, 0.32mg of lead were given as the total daily intake per capita by this research. 3. Efficacy of washing or skinning to decrease the amount of metals in crops After washing the crops sufficiently with commercial linear alkylate sulfonate, the concentration of heavy metals could be reduced to $50{\sim}80%$ showing decreasement rate of $20{\sim}50%$. Also, after skinning the fruits, decreasement rate of the heavy metal concentration shelved $0{\sim}50%$.

  • PDF

계면활성제 탈착촉진법을 이용한 폴리클로네이티드 바이페닐(PCBs)과 페놀류(Phenols)에 의하여 오염된 지반의 정화방안 (Remediation Technique for PCBs-and Phenols-Contaminated Soils by Surfactant-Enhanced Desorption)

  • 박준범;윤현석;김준섭
    • 한국지반공학회논문집
    • /
    • 제15권5호
    • /
    • pp.241-257
    • /
    • 1999
  • 유해 유기 오염물에 의한 지반 오염이 심각한 사회문제로 부각되고 있다. 지반 내로 유입된 소수성 유기 화합물은 대부분 난분해성이며, 일단 흙에 흡착되면 제거하기 어려워 오랜 기간에 걸쳐 지하수 오염원으로 작용하게 된다. 이러한 지반 오염의 심각성은 이미 인식되어 왔지만 이를 위한 적절한 정화 방법은 아직 제시되고 있지 않다. 본 논문에서는 유해 유기물 중 p-Cresol과 3,5-Dichlorobiphenyl에 대하여 계면활성제 용액을 이용한 정화 방법의 적용성을 실험을 통해 연구하였다. 중성 계면활성제, Triton X-100과 음이온성 계면활성제, SDS가 탈착용액으로 사용되었다. 먼저 흙과 유기화합물과의 흡착 특성을 파악하고, 계면활성제 용액을 이용한 회분식 탈착 실험과 연성벽체 투수기를 이용한 주상 실험을 실시하였다. 등온흡착실험에서 각 물질의 선형분배계수, $K_p와\; 옥탄올-물\; 분배계수,\; K_{ow}$는 대수 선형 관계식으로 나타났다. 3,5-Dichlorobiphenyl의 경우 회분식 실험에서 0.5 % 농도의 Triton X-100용액으로의 탈착량이 물에 의한 탈착량에 비하여 28배의 향상을 나타내었다. 지반 오염물질이 소수성이며, 난분해성이 클수록 계면활성제 용액을 이용한 지반정화 효율이 높은 것으로 나타났다.

  • PDF

Low Temperature Thermal Desorption (LTTD) Treatment of Contaminated Soil

  • Alistair Montgomery;Joo, Wan-Ho;Shin, Won-Sik
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2002년도 추계학술발표회
    • /
    • pp.44-52
    • /
    • 2002
  • Low temperature thermal desorption (LTTD) has become one of the cornerstone technologies used for the treatment of contaminated soils and sediments in the United States. LTTD technology was first used in the mid-1980s for soil treatment on sites managed under the Comprehensive Environmental Respones, Compensation and Liability Act (CERCLA) or Superfund. Implementation was facilitated by CERCLA regulations that require only that spplicable regulations shall be met thus avoiding the need for protracted and expensive permit applications for thermal treatment equipment. The initial equipment designs used typically came from technology transfer sources. Asphalt manufacturing plants were converted to direct-fired LTTD systems, and conventional calciners were adapted for use as indirect-fired LTTD systems. Other innovative designs included hot sand recycle technology (initially developed for synfuels production from tar sand and oil shale), recycle sweep gas, travelling belts and batch-charged vacuum chambers, among others. These systems were used to treat soil contaminated with total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), pesticides, polychlorinated biphenyls (PCBs) and dioxin with varying degrees of success. Ultimately, performance and cost considerations established the suite of systems that are used for LTTD soil treatment applications today. This paper briefly reviews the develpoment of LTTD systems and summarizes the design, performance and cost characteristics of the equipment in use today. Designs reviewed include continuous feed direct-fired and indirect-fired equipment, batch feed systems and in-situ equipment. Performance is compared in terms of before-and-after contaminant levels in the soil and permissible emissions levels in the stack gas vented to the atmosphere. The review of air emissions standards includes a review of regulations in the U.S. and the European Union (EU). Key cost centers for the mobilization and operation of LTTD equipment are identified and compared for the different types of LTTD systems in use today. A work chart is provided for the selection of the optmum LTTD system for site-specific applications. LTTD technology continues to be a cornerstone technology for soil treatment in the U.S. and elsewhere. Examples of leading-edge LTTD technologies developed in the U.S. that are now being delivered locally in global projects are described.

  • PDF

고진공하에서의 위성체 부품의 오염측정에 관한 연구 (A Study on the contamination measurement of spacecraft components under High Vacuum Environment)

  • 이상훈;서희준;문귀원;최석원
    • 한국진공학회지
    • /
    • 제11권2호
    • /
    • pp.87-96
    • /
    • 2002
  • 위성체가 작동하는 우주환경인 고진공상태에서는 위성체의 부품에서 발생 할 수 있는 outgassing으로 인해 위성체가 오염되어 위성체의 성능이 저하될 수 있으며, 특히 이차면경(second surface mirror) 및 광학렌즈 등을 오염시킴으로써 위성체 본연의 임무수행 실패라는 결과를 초래할 수도 있다. 따라서 지상에서 위성체의 부품에 대해 고온($85^{\circ}C$ 이상)과 고진공($5.0\times10^{-3}$ Pa 이하)의 상태를 모사하여 오염물질을 제거함으로써 outgassing의 발생을 막고, 아울러 오염근원을 검출할 수 있는 vacuum bake-out 시험이 필수적이라 할 수 있다. 이를 위해서 한국항공우주연구원 우주시험동에 설치된 bake-out 챔버를 이용하여 위성체 부품 중에서 SAR(Solar Array Regulator)와 MLI(Multi Layer Insulator)를 예를 들어 오염측정에 관한 연구를 수행하였다. 항공우주연구원의 bake-out 챔버는 rotary vacuum pump와 booster pump를 이용하여 5.0 Pa의 저진공을 형성하고, 2대의 cryopump를 이용하여$5.0\times10^{-3}$ Pa 이하의 고진공을 생성하게 된다. 또한 $180^{\circ}C$까지의 고온을 모사하기 위하여 챔버 shroud 안쪽에 ceramic 재질로 된 heater가 $30^{\circ}$간격으로 총 48개를 설치되어 있으며, 온도제어는 PID(Proportional Integral Differential) 제어 방식이 이용되었다. Vacuum bake-out 시험시에는 RGA(Residual Gas Analyzer)를 이용하여 각종 오염물질을 검출할 수 있고, TQCM(Thermoelectric Quartz Crystal Microbalance)을 사용하여 발생하는 오염물질의 방출률(outgassing rate)을 측정한다. 또한 필요시에는 IR/UV Spectrometer를 이용하여 witness plate에 흡착된 오염물질의 성분을 분석하여 위성체 부품으로의 적합성을 판단한다. SAR의 bake-out에서는 TQCM 측정결과 오염물질이 시간에 따라 감소추이는 보이지만 꾸준히 배출되고 있는 경향을 나타내고, RGA 분석결과 그 성분이 고분자 화합물로 추정되어 위성체 부품으로 사용하기에는 적절하지 못할 것으로 판단하였다. MLI의 bake-out에서는 RGA 및 witness plate를 이용한 오염측정 결과 특이한 오염물질을 발견할 수 없었다.

산업단지지역 하천 미생물에 의한 퍼클로레이트 제거 (Perchlorate Removal by River Microorganisms in Industrial Complexes)

  • 조강익;안영희
    • Korean Chemical Engineering Research
    • /
    • 제52권1호
    • /
    • pp.92-97
    • /
    • 2014
  • 퍼클로레이트($ClO_4^-$)는 지표수는 물론이고 토양지하수의 신규 오염물이다. $ClO_4^-$는 요오드가 갑상선에 흡수되는 것을 방해하므로 갑상선 호르몬 생성을 저하시킨다. $ClO_4^-$는 물에서 매우 용해도가 높고 안정적이라는 특징으로 인해 $ClO_4^-$를 환원하는 세균(PRB)에 의한 생분해가 자연저감의 가장 중요한 요인으로 여겨지고 있다. 산업단지 내 하천은 점 또는 비점오염원으로부터 배출된 $ClO_4^-$에 오염될 잠재성이 있다. 그래서 본 연구에서는 구미지역 산업단지 내 하천에서 물시료를 채취하여 하천미생물의 $ClO_4^-$ 분해 잠재능을 회분배양으로 조사하였다. 외부 전자공여체를 첨가하지 않고 83시간 동안 배양한 결과 모든 시료는 $ClO_4^-$ 제거효율이 0.77% 이하로 매우 낮은 것으로 나타났다. 그러나 외부 전자공여체(acetate, thiosulfate, $S^0$, 또는 $F^0$)를 첨가한 경우는 제거효율이 최고 100%로 나타났고, 첨가된 전자공여체의 종류와 시료채취지점에 따라 제거효율은 다양한 것으로 나타났다. 본 연구에서 사용한 전자공여체 중에서는 acetate를 사용했을 때 $ClO_4^-$분해효율이 가장 우수한 것으로 나타나 종속영양방식 PRB의 활성이 우세함을 알 수 있었다. 본 연구의 결과는 산업단지 내 하천 미생물에 의한 $ClO_4^-$ 자연저감에 대한 기초정보를 제공하여 원위치 생물복원처리에서 $ClO_4^-$ 생분해를 증진하기 위한 전략마련에 유용하게 사용될 것이다.

Phenanthrene-오염토양의 동전기 생물학적 복원에서 pH 조절방법이 제거효율에 미치는 영향 (Effects of pH Control Methods on Removal Efficiency in Electrokinetic Bioremediation of Phenanthrene-contaminated Soil)

  • 김상준;박지연;이유진;양지원
    • KSBB Journal
    • /
    • 제21권3호
    • /
    • pp.181-187
    • /
    • 2006
  • 본 연구에서는 phenanthrene-오염토양의 정화를 위한 동전기 생물학적복원에서 나타나는 pH 조절과 관련한 문제점과 이것에 대한 해결방법이 복원효과에 어떠한 영향을 주는지 조사하므로써 앞으로의 방향을 모색하고자 하였다. 플라스크 배양실험에서 Sphingomonas sp. 3Y를 이용하여 phenanthrene를 분해하기 위해서는 황산염을 적절한 농도로 공급하는 것이 중요하였는데 동전기 생물학적복원에서는 $MgSO_4$를 황산염원으로 공급했을 때 Mg이온이 음극에서 생성된 수산화이온과 결합하여 침전물을 형성하고 토양과 생물반응기의 pH를 과도하게 감소시키므로 미생물활성을 저해하고 제거효율이 감소되었다. 따라서 pH를 중성으로 유지하기 위해 강한 완충성분을 사용한 경우 비록 pH와 미생물활성은 잘 유지되었지만 제거효율이 크게 감소되었다. 한편 낮은 농도로 $MgSO_4$를 공급했을 때 역시 pH와 미생물활성은 잘 유지하였으나 제거효율이 다소 감소하였다. NaOH와 같은 중화제를 첨가한 경우에는 토양 pH의 상승하여 제거효율이 감소되었다. 결과적으로 전해질 조성은 동전기 생물학적복원의 복원효율에 매우 중요한 요소이며 앞으로 오염물 분해와 미생물활성유지에 적합한 황산염원이 조사되어야 한다.

고유치 수치기법을 이용한 지하저장공동 주위의 용질이동해석 (A Solute Transport Analysis around Underground Storage Cavern by using Eigenvalue Numerical Technique)

  • 정일문;김지태;조원철;김남원
    • 지질공학
    • /
    • 제18권4호
    • /
    • pp.381-391
    • /
    • 2008
  • 본 연구에서는 수치해석의 시간차분에서 발생하는 절단오차를 극복하는 방안으로 고유치 기법을 도입하였다. 고유치기법은 모의를 할 때 공간만을 이산화하는 특징을 가지며, 공간적으로 이산화된 방정식을 대각화시킴으로써 선형동력학적 시스템을 분리시킨 후 시간적분을 이용한 계산이 임의의 위치에서 임의의 시간에 대해 개별적으로 또 연속적으로 수행된다. 이러한 고유치기법을 이용하여 오염물 이동을 모의하고 이를 해석해와 비교 검증하였고, 동일한 조건에서 유한요소법을 이용한 수치모형과 고유치 기법을 이용한 용질이동의 예측을 실시한 결과 고유치기법을 이용할 경우 계산시간과 저장용량이 수치모형에 비해 절약됨을 확인할 수 있었다. 고유치 기법을 이용하여 지하유류저장 공동주위의 불균일 유속장에서 용질의 이동을 분석하였다 이 방법이 모의발생에 오랜 시간이 걸리는 문제에 유용하게 사용될 수 있으므로, 공동에 인접한 오염원으로부터 공동의 안전성을 평가하기 위한 민감도 분석에 이 방법을 적용하였으며, 모의결과에 의하면, 종분산지수와 횡분산지수가 각각 50 m, 5 m일 때 공동에 도달하는 시간은 약 50년으로 추정되었다.