• Tribology and Lubricants
• /
• 제22권1호
• /
• pp.8-13
• /
• 2006

Sliding wear tests have been performed to evaluate the effect of normal load decrease on the wear depth of nuclear fuel rods in room temperature air. The objectives of this study are to quantitatively evaluate the supporting ability of spacer grid springs, to estimate the wear depth by using the contacting force decrease and to compare the wear behavior with increasing test cycles (up to $10^7$) at each spring condition. The result showed that the contacting load decrease depends on the spring shape and the applied slip amplitude. The estimated wear depth is smaller when compared with measured wear depth. Based on the test results, the wear mechanism, the role of wear debris layer and the spring shape effect were discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.112.2-112.2
• /
• 2005

• Tribology and Lubricants
• /
• 제19권4호
• /
• pp.230-236
• /
• 2003

In applications such as MEMS and NEMS devices, the adhesion force and contact load may be of the same order of magnitude and the static friction coefficient can be very large. Such large coefficient may result in unacceptable and possibly catastrophic adhesion, stiction, friction and wear. To obtain the static friction coefficient of contacting real surfaces without the assumption of an empirical coefficient value, numerical simulations of the contact load, tangential force, and adhesion force are preformed. The surfaces in dry contact are statistically modeled by a collection of spherical asperities with Gaussian height distribution. The asperity micro-contact model utilized in calculation (the ZMC model), considers the transition from elastic deformation to fully plastic flow of the contacting asperity. The force approach of the modified DMT model using the Lennard-Jones attractive potential is applied to characterize the intermolecular forces. The effect of the surface topography on the static friction coefficient is investigated for cases rough, intermediate, smooth, and very smooth, respectively. Results of the static friction coefficient versus the external force are presented for a wide range of plasticity index and surface energy, respectively. Compared with those obtained by the GW and CEB models, the ZMC model is more complete in calculating the static friction coefficient of rough surfaces.

• Nuclear Engineering and Technology
• /
• 제43권5호
• /
• pp.447-458
• /
• 2011

This paper proposes an approximated contact force model to identify the nonlinear behavior of a fuel rod with gap supports; also, the numerical prediction of interfacial forces in the mechanical contact of fuel rods with gap supports is studied. The Newmark integration method requires the current status of the contact force, but the contact force is not given a priori. Taylor's expansion can be used to predict the unknown contact force; therefore, it should be guaranteed that the first derivative of the contact force is continuous. This work proposes a continuous and differentiable contact force model with the ability to estimate the current state of the contact force. An approximated convex and differentiable potential function for the contact force is described, and a variational formulation is also provided. A numerical example that considers the particularly stiff supports has been studied, and a fuel rod with hardening supports was also examined for a realistic simulation. An approximated proper solution can be obtained using the results, and abrupt changes from the contacting state to non-contacting state, or vice versa, can be relieved. It can also be seen that not only the external force but also the developed contact force affects the response.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2315-2327
• /
• 1992

본 연구에서는 조립될 부품사이의 위치 오차를 극복하여, 로봇에 의한 정밀부 품의 자동조립을 가능하게 하는 조립알고리즘을 제시하였다. 제안된 조립알고리즘은 임의로 파지된 자세를 인식하여 조립될 축과 구멍의 중심선을 일치시키는 알고리즘과 복합위치 및 힘제어(hybrid position/force control)를 적용하여 위치오차를 극복하여 주는 구멍검색 알고리즘으로 구성하였으며, 로봇을 이용한 자동조립에 제안된 알고리 즘을 적용한 실험 결과를 보였다.

• 소음진동
• /
• 제10권4호
• /
• pp.679-685
• /
• 2000

A procedure is presented for calculating the magnitude and shape of impact pulses in a vibro-impact system when an arbitrary input force is applied to a point in the system. The procedure utilizes the condition that the displacements of two contacting point in the primary and secondary system are the same during a contacting period. The displacements of those points are calculated numerically through the convolution integral which involve the impulse response functions and applied forces. The validity of the calculation procedure is demonstrated by using it to calculated the impact forces of a simple system where a theoretical solution is known and also of systems for which other researchers have published results. The agreement between the results derived by the numerical method and the theoretical and also some published results is good.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.139-142
• /
• 1996

This paper presents a method of controlling contact force for deburring tasks. The cope with the nonlinearities and time-varying properties of the robot and the environment, a neural network control theory is applied to design the contact force control system. We show that the contact force between the hand and the contacting surface can be controlled by adjusting the command velocity of a robot hand, which is accomplished by the modeling of a robot and the environment as Mass-Spring-Damper system. Simulation results are shown.

• Tribology and Lubricants
• /
• 제10권4호
• /
• pp.82-88
• /
• 1994

This paper deals with a FEM computation as well as measurement of the contact force and distribution of the temperature in rubber lip seals when the sealing interference between the rotating shaft and the lip edge is present. The study of the contact forces and distributions of the temperature and the sealing contact stress has always been one of the basic steps in the process of designing a lip seal. The calculated FEM results indicate that as the sealing interference increases, the contact force moderately increases compared with decreased sealing interference at the seal lip edge and radically increases the contacting width. And the FEM computation of oontact forces including nonlinear problems has been compared with experimental measurements with good agreement. The frictional heat does not dissipate promptly in the rubber seal lip and tends to accumulate at the contacting lip edge especially.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 춘계학술대회
• /
• pp.269-272
• /
• 2006

Surface contacts between mold and target should be in parallel for the imprinting mechanism. However, the size of contacting area makes it difficult for both mating surfaces to be in all contact because of precision level of the imprinting machine and the waviness of mold and target. The gripping force for both mold and target with the vacuum chuck is also major effect to interrupt the full contact, which must be avoided in imprinting mechanism. In this study, the preliminary study for the causes of non-uniformity of contacting surfaces such as mold and target is performed with $470{\times}370mm^2$ LCD panel size.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.37-43
• /
• 2000

The effect of the alignment of the contacting bodies is concerned. Tilting of a body (indenter) is regarded as a mis-alignment. Recently developed method fur evaluating the contact normal traction is introduced and discussed, in which piecewise parabolic profile is considered as a generalized contact profile. Indentation by a wedge with rounded apex is solved as an example problem. In the case of partial slip regime, the variation of shear traction is examined during the closed path of shear force by using the efficient numerical technique. Concentration of the slip region is also investigated. By evaluating the energy dissipation from the contact surface, the effect of the mis-alignment-alignment on wear is discussed.