• Journal of Environmental Impact Assessment
• /
• v.18 no.2
• /
• pp.79-87
• /
• 2009

This study was performed for the application of porous concrete blocks and aquatic plants for the water purification in small urban stream. This study investigated the ability of water purification according to various environments, algae and aquatic plants. When the porous concrete was used as contact media, the average removal efficiencies of SS, BOD and COD were 85~95%, 50~60% and 65~75%, respectively. Also, when the porous concrete and aquatic plants was used the average removal efficiency of SS, BOD and COD were 90~95%, 60~70% and 70~80%, respectively. As the results, average removal efficiency of total nitrogen, at the condition of the porous concrete and aquatic plants, was about 40-50%, then, that of total phosphorus was about 60-70%.

• Journal of Agricultural Extension & Community Development
• /
• v.3 no.1
• /
• pp.83-93
• /
• 1996

This study examines the agricultural extension agents` satisfaction with their job and its related variables - personal characteristics, achievement motivation, and needs level. Based on die Job Descriptive Index, Brayfield-Rothe Index, and Porter Instrument, the survey was carried out on 127 agents. Results show 1) a significant difference in personal characteristics is found in position, farmer contact frequency, and service region applied for, but not in age, gender, scholastic ability, career, task, and another department contact frequency, 2) the achievement motivational level is related to job satisfaction, and 3) the needs level is not related to job satisfaction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.404-405
• /
• 2007

Tin-doped indium thin film is outstanding material among transparent Conductive Oxide (TCO) materials. ITO thin films show a low electrical resistance(<$10^{-4}\;[{\Omega}{\cdot}m]$) and high transmittance(>80%) in the visible range. ITO thin films usually have been deposited on the glass substrate. In order to apply flexible display, the substrate should have the ability to bend and be deposited without substrate heat. Also properties of ITO thin film depend on what kind of substrate. In this study, we prepared ITO thin film on the polycarbonate (PC) substrate by using Facing Target Sputtering (FTS) system. Before deposition of ITO thin film, PC substrate took plasma surface treatment. The electrical and surface properties of as-deposited thin films were investigated by Hall Effect measurement, UV/VIS spectrometer and the surface property of substrate is investigated by Contact angle measurement.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.2
• /
• pp.145-153
• /
• 2022

Purpose : This study aimed to investigate the effects of blended learning on learning satisfaction in nursing students. Methods : This study was conducted with 160 current nursing students in the department of nursing at K university located in city B. All students included in the study understood the purpose of the study and provided informed consent to participate. Data were collected between May 3 and July 9, 2021 and analyzed using SPSS/WIN 22.0. The frequency, percentage, mean, and standard deviation were created, and t-test, ANOVA, and Scheffé test for post hoc analysis were performed. Correlations were analyzed using Pearson's correlation coefficient. The factors influencing learning satisfaction were analyzed using multiple regression. Results : Significant differences were observed for academic stress according to the online classes environmental satisfaction (F=4.10, p=.001), online classes experience (t=4.11, p=.001) and self-directed learning ability according to the grade (F=4.10, p=.001), online classes environmental satisfaction (t=4.11, p=.001). The academic stress of nursing students who experienced blended learning was significantly negatively correlated with self-directed learning ability (r=-.480, p<.001), and learning satisfaction (r=-.236, p<.001). self-directed learning ability showed a significant positive correlation with learning satisfaction (r=.524, p<.001). The regression model for the factors affecting the learning satisfaction of the subjects was statistically significant (F= 3.027, p<.001). The major influential factors of learning satisfaction were grade (𝛽=.154, p=.013), satisfaction with school life (𝛽=.168, p=.032), and satisfaction with non-contact learning environment (𝛽=-.141, p=.028). The explanatory power was 28 %. Conclusion : These results indicate that it is necessary to reduce academic stress and increase self-directed learning ability to enhance learning satisfaction in nursing students through blended learning. In addition, the development and operation of a tailored intervention program is required to help improve learning satisfaction.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.20-27
• /
• 2001

A variable configuration tracked vehicle(VCTV) is developed to reduce turning energy and improve climbing ability for stairs. This mechanism has four track T-type frames. By changing the driving direction, each track T-type frame rotates to minimize the contact area with ground. It also has better performance than other VCTV in energy consumption of turning. Futhermore this mechanism is more stable than other VCTV on the rough terrain. When climbing stairs, each track T-type frame rotates to obtain a front attack angle and keep stability on steep stairs. The design parameters of components of track T-type frames are optimized to enhance the performance of climbing stairs. Performance indices include a stable angle, a climbing ability, a height of the vertical obstacle. In case that the overall length of the mechanism is 0.2m, it is required that the radius of the wheels should be 5mm and the length track contacted with he ground should be 0.09m to climb higher and steeper stairs.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.12
• /
• pp.104-110
• /
• 2007

Internal defects are mainly caused by a corrosive action and degradation in the pipe used in a nuclear power plant or factory. The ESPI method have the many advantages when compared with conventional method. The advantage are the area measurement ability at one time and non-contact measurement ability in the real-time. In this paper, we studied on the measurement of a internal defect by using out of plane ESPI technique. Here, we compared the experimental results using out of plane ESPI with the FEM results.

• Journal of the Speleological Society of Korea
• /
• no.75
• /
• pp.55-64
• /
• 2006

The extension of development and originality of the ability which is various leads and studying voluntary character and the ability back the education which it considers actively it raises and the infield it does. With activation plan of cave resources home page of Speleological Society of Korean like home page of Speleological Society of Japan cave crane information, caving information, cave Q/A, cave publication, the relation site back the possibility of seeing information regarding the cave which is various in order to be, it reorganizes. The possibility of coming in contact in order to be, various branch information also the general rain specialist regarding the cave resources. Currently the Possibility of seeing the various branch data for the application of the cave resources at any time it is, home page of Speleological Society of Korean the possibility of doing to lead in order to be, it proposes the plan. From one person it will be able to study the data regarding the cave of various field in order, all curricular materials regarding the cave resources the educational program which leads a home page about under developing it proposes the activation plan of the cave resources.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.136-142
• /
• 2005

The function of main starting valve for marine engine is to supply cylinder with the air to start marine engine. But, if the spindle, one of the main starting valve components, doesn't rotate accurately at the designated air pressure, the marine engine may have some trouble in starting. So, to resolve the problem due to spindle .elation in the main starting valve, the blocking device (blocking plate, limit switch, etc.) is installed in the upper part of spindle to constrain the rotation. So, in this paper we introduced the rotation constraining ability of blocking plate prevent the spindle from mis-working in the main starting value of the marine engine.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.3
• /
• pp.228-234
• /
• 2016

Recent icebreaking ships need to be designed to enhance not only icebreaking capability but also turning ability. For the evaluation of ice resistance induced by an icebreaking hull form, HHI (Hyundai Heavy Industries) has developed the hybrid empirical formulas (Park et al., 2015) by considering the geometrical hull shape features, such as waterline and underwater sections. However, the empirical formulas have inherent limits to the precise estimation of the icebreaking and turning ability because the breaking process and the resulting pattern are ignored. For this reason, numerical calculation in time domain is performed to predict the icebreaking process and pattern. In the simulation, varying crushing stress according to velocity vectors and contact areas between hull and ice is newly introduced. Moreover, the simulation results were verified by comparing them with the model test results for three different bow-first icebreaking models.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.130-131
• /
• 2000

One of the more promising proposals for guiding and focusing neutral atoms involves dark hollow laser beams. When the frequency of the laser is detuned to the blue of resonance, the dipole force the atoms feel in the light confines them to the dark core where the atoms can be transported with minimal interaction with the light. The ability of the all-light atom guides to transport large number of ultracold atoms for long distances without physical walls leads to the possibility of a versatile tool for atom lithography, atom interferometry, atomic spectroscopy as well as for transporting and manipulating Bose-Einstein condensates. Furthermore since the atoms transported in all-light atom guides do not come into contact with matter, they can in principle be used to transport antimatter as well. The ability to vary the core size of the hollow beam makes the all-light atom guide potentially useful for focusing neutral atoms. The atoms could be focused as tight as the core size of the hollow beam at its waist. This new focusing scheme, called the atom funnel, would not show spherical and chromatic aberrations that conventional harmonic focusing suffers from. (omitted)