• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1110-1119
• /
• 2006

If water flows through a narrow passage into a medium that keeps the equilibrium of temperature, it causes small temperature difference and makes a temperature anomaly. The seepage or leakage often observed at old dams is a representative example of bringing about a temperature anomaly. Therefore, temperature measurements have been regarded as one of excellent methods that can detect the situation of seepage or leakage. However, because existing temperature measurement methods are based on a single sensor, the application of the method to the whole structure is nearly not possible in technical and economical phases. This paper introduces a temperature monitoring system using a thermal sensor cable that is comprised of addressable thermal sensors connected in parallel at many positions within a single cable. Through various laboratory and field experiments, it has been proved that the temperature monitoring technique can give an useful information about permeability of a medium or connectivity of fractures which have been regarded as difficult problems.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1205-1210
• /
• 2005

The behavior of rock mass and solute(e.g. groundwater, radioactivity) flow in fractured rock can be directly influenced by joint roughness. The characteristics of joint roughness is also a main factor for the rock classification(e.g. RMR, Q system) which is usually used in tunnel design. Nevertheless, most of JRC estimation has been carried out only by the examination with the naked eye. This JRC estimation has a lack of objectivity because each investigator judges JRC by his subjective opinion. Therefore, it will be desirable that the assessment of JRC is performed by a numerical analysis which can give a quantitative value corresponding to the characteristics of a roughness curve. Meanwhile, roughness curves for joint surfaces which are observed in drill cores have been obtained only along linear profiles. Although roughness curves are measured in the same joint surface, they can frequently show diverse aspects in a standpoint of roughness characteristics. If roughness curves can be measured along the elliptical circumferences of joint surfaces from core scanning images or Televiewer images, they will certainly be more comprehensive than those measured along linear profiles for roughness characteristics of joint surfaces. This study is focus on dealing with (1) extracting automatically roughness curves from core scan image or Televiewer image, (2) improving the accuracy of quantitative assessment of JRC using fractal dimension concept.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.799-806
• /
• 2004

Recently, as the forerunner in establishing the Northeast Asia's logistics base, a lot of marine engineering works such as new ports and container terminals, extension of old ports, new bridges, land reclamation etc. have been progressed. Parallel to it, there is also an increasing demand for improving the safety of construction. In this situation, high resolution seismic reflection profiling can be well used, attempting to classify rocks and sediments under water, if possible, to delineate the distribution of grain sizes in sediments not only for calculating the cost of removing sediments from harbour's channels, but also for estimating the bearing capacities for bridge or port construction. However, the results from the corresponding reflection survey that has been in operation in our country can not be effectively used for engineering purposes mostly due to the insufficient resolution. Thus. in this paper, two innovative strategies are introduced to enhance resolution. The one deals with a newly designed exploration barge that will help reduce several kinds of noises encountered electrically or operationally. The other is associated with an establishment of optimum measuring system comprising e.g. a specially devised hydrophone with a combination of 7 piezoelectric elements. Field experiments performed at Busan harbour are illustrated. The quality of acquired data was thereby fundamentally improved in comparison with that obtained at the same time in a conventional way.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.807-814
• /
• 2004

Land seismic reflection survey has been increasingly demanded in various civil engineering works because of its own ability to delineate layers, water table, to detect cavities or fracture zones, to estimate seismic velocities of each layer. However, our shallow subsurface structures are very complex. The relatively thin layer(mostly soil) to the wavelength directly followed by a basic rock with high impedance used to generate complicated surface waves, kind of channel waves with high amplitude that is dominate in entire seismograms and hence the useful reflection events will be almost hopelessly immersed in the undesired surface waves. Thus, it would seem that the use of traditional seismic survey could not be likely to provide in itself a satisfactory information about our exploration targets. This paper hence introduces an efficient measuring strategy illustrating a properly controlled arrangement of the vertical single force sources commonly used, yielding a very sharply elongated form of P-energy with a minimum of S radiation energy, what we call, P-beam source. Abundant experiments of physical modeling showed that in that way the surface waves could be enormously reduced and the reflection events would be additive and thus reinforced. Examples of field data are also illustrated. The contribution of P-beam source will be great in civil engineering area as well as in general geological exploration area.

• 한국화재소방학회논문지
• /
• 제30권2호
• /
• pp.81-86
• /
• 2016

최근 국내 도심지 도로는 빈번한 교통정체가 발생하고 있다. 도심지 교통정체를 해소하기 위한 방안으로 국내에서는 대심도 복층터널에 대한 계획이 이루어지고 있다. 국내에서 계획되는 대심도 복층터널은 소형차 전용으로 계획되며 네트워크형의 구조를 가지고 있어 차량의 출입이 지하공간에서 이루어지고 있다. 이러한 네트워크형 대심도 복층터널은 터널의 단면 및 높이가 일반도로터널 보다 작고 차량의 출입으로 인한 교통풍의 작용으로 화재연기가 터널 승객의 대피보다 빠르게 전파되어 인명피해 발생이 예상된다. 따라서 본 연구에서는 국내 네트워크형 대심도 복층터널에 화재시 화재연기 확산지연을 방지하고자 화재연기 확산지연 장치 작동시 터널 차단면적에 터널 내 작용하는 유입풍의 저감효과를 분석하였으며, 분석결과 터널 차단면적이 50% 이상일 경우 터널 내 작용하는 풍속을 약 21% 저감시키는 효과가 나타났으며, 면적이 50% 이상일 경우 화재 연기의 확산속도를 약 21% 저감시켜 안전한 대피에 도움이 될 것이라 판단된다.

• 간호행정학회지
• /
• 제3권1호
• /
• pp.65-82
• /
• 1997

The purpose of this study was to investigate the role expectation of Clinical Nurse Specialist(CNS) in A tertiary-affiliated hospital in Seoul. Data were surveyed from Jul. 8, to Jul. 20, 1996. 74 medical doctors and 119 nurses participated in this survey. For data analysis, SPSS/PC+ program was used: ${\chi}2-test$, t-test, ANOVA. The difference was analyzed by the subjects' position and department. The results of this study were summarized as follows: 1. The perception about the CNS system : Most of the subjects of study perceived that the introduction of CNS system was needed. And the introduction time of CNS system was demanded as fast as possible, or after special preparation. 2. The comparison of the need for the subroles of the CNS in A tertiary-affiliated hospital : The need for the subroles(0=not known, 1=not needed to 4=absolutely essential) was significantly different between medical doctors and nurses. The total mean scores for degree of need for each subole were as follows: Education 3.37, Consultant 3.34, Researcher 3.29, Direct care provider 2.86. 3. The comparison of the percent of time spent in A tertiary-affiliated hospital : The percent of time spent was significantly different between medical doctors and nurses. The total mean percent of time spent in the five subroles was as follows: Direct care provider 34.9%, Educator 23.9%, Researcher 18.9%, Consultant 12.8%, and Management/Change agent 9.5% According to the study results, suggestions were made: 1. Further study for the need of the CNS role as direct care provider is needed, after correcting the items within the narrow scope in some clinical department. 2. Development of the detail roles for the extent of autonomy is needed, and validity should be tested. And then they will be used for the basic data of the role development of the CNS.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 동계학술발표대회 논문집
• /
• pp.23-23
• /
• 2006

• 품질경영학회지
• /
• 제20권1호
• /
• pp.147-157
• /
• 1992

This article describes a prototype expert system for yarn spinning process planning in textile industry. This expert system is intended as a consultant to give the technicians interactive assistance for the appropriate process planning in accordance with used materials, required count, and other factors affected yarn spinning by means of many types of machine. Also, this system has the other function that can be compared the standard values with the measured ones for quality characteristics control. VP-EXPERT-a rule-based microcomputer expert system development tool-provides the expert system components for this development. The details of knowledge organization, rule representation, inference reasoning process, and performance of this expert system are demonstrated with the practical yarn spinning operations.

• 산업공학
• /
• 제19권2호
• /
• pp.168-173
• /
• 2006

In the Reporting Cell Location Management (RCLM) system, a subset of cells in the network is designated as the reporting cells. Each mobile terminal performs location update only when it enters one of these reporting cells. When a call arrives, the paging is confined to the reporting cell the user last reported and the neighboring bounded non-reporting cells. Frequent location update may result in degradation of quality of service due to interference. Miss on the location of a mobile terminal will necessitate a search operation on the network when a call comes in. We must decide the number of reporting cells and which cell should be reporting cell to balance the registration (location update) and search (paging) operations to minimize the cost of RCLM system. This paper proposes a ranking ant colony system (RACS) for optimization of RCLM system.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1483-1499
• /
• 2015

With the improvement of the quality of construction materials and the development of construction technologies, large-scale long-span steel frame buildings have been built recently. The P.E.B system using tapered members is being employed as an economically-efficient long-span structure owing to its advantage of being able to distribute stress appropriately depending on the size of sectional areas of members. However, in December 2005 and in February 2014, P.E.B buildings collapsed due to sudden loads such as snow loads and wind gusts. In this study, the design and construction of the P.E.B system in Korea were analyzed and its structural safety was evaluated using the finite element analysis program to suggest how to improve the P.E.B system in order to promote the efficient and rational application of the system.