• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1187-1193
• /
• 2022

A construction site is a highly complex and constantly changing environment, where hazardous areas are difficult to detect if workers lack sufficient knowledge and awareness. Thus, frequent worker safety training is required. Numerous studies on using virtual reality (VR) for safety training were published. While they demonstrate the potential for improving the skills necessary to avoid accidents in the construction industry, they remain difficult to apply at actual construction sites. VR requires specialized hardware and software, limiting workers' access and restricting workers' participation in training sessions. As a result, this paper proposes multiple platforms for immersive virtual reality safety training (VRMP) based on Industry Foundation Classes (IFC) and web technologies such as immersive web (WebXR). The VRMP is compatible with mobile and desktop devices currently by workers and demonstrates scenario models familiar to workers. Also, it reduces development time by utilizing Building Information Models (BIM). Additionally, The VRMP collects data from workers in a virtual environment to assess each worker's safety level, assisting workers in effectively and comfortably gaining a better understanding and raising their awareness. This paper develops a case study based on the VRPM in order to assess its effectiveness.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.32-38
• /
• 2009

Construction companies economic to lighten the restrictions on safety education and training due to the domestic recession as long as the global downturn. With this, the Korean government lightened that restrictions, but the incidents are being sharply increased nowadays. The construction industry is more hazardous than any others, so, they insist to reinforce the training for incidents prevention, but it is prone to be disregarded at the subcontractors of the bigger construction companies due to their financial problems. According to these matters, this study hereby surveyed regarding their suggestions for the improvements of the training concepts through questionnaires below.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.29-35
• /
• 2014

The purpose of this study is to investigate the problem on safety and health training system in Occupational Safety and Health Act(OSHA) and to find countermeasures to improve it in the construction industry. The questionary survey was done on aiming at tracing the legal drawbacks of safety and health training system. The questionary was prepared to target on site workers, management supervisors, and safety supervisors in various construction sites. After analyzing the answers from the survey, realistic and optimal countermeasures on derived problems were proposed. These should be included on the next revision of OSHA.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.43-55
• /
• 2009

In terms of deregulation requests from business, incidents at construction sites are rapidly increasing after reducing the regular safety training hours. Especially, to prevent incidents through safety trainings for construction site workers, who have lots of hazardous tasks than general manufacturing, is not only to protect property of both the companies and the country but also to increase their profits. That is why there are loud voices regarding that the safety training is a core mandatory to prevent industrial incidents. But, most companies, as soon as the deregulation for safety training is implemented, mitigated conducting safety trainings to prevent incidents. With this, the incidents are currently to be increased and caught in a vicious circle of many incidents at the smaller companies because of their absentmindedness regarding safety training due to their poorness as subcontractors of major companies, comparing to major companies. This study explains that the difference between managers and workers are existing about safety awareness and knowledge. And, we confirmed that the educational factor led by deficiency of safety awareness and knowledge was the major factor.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.621-629
• /
• 2015

Construction worker safety and safety training continue to be main issues in the construction industry. In order to promote safety awareness among workers, it is imperative to develop a more effective and efficient safety training. This study compared two methods in construction worker safety training: 1) a conventional lecture and 2) 3D simulation through Building Information Modeling. Both training methods included the same contents, a selection of safety standard and guide suggested by Occupational Safety and Health Agency and the Korea Occupational Safety and Health Agency; the contents were then produced into two types of training methods. A survey was conducted targeting on safety managers, in which the managers evaluated lifelikeness, active learning and enjoyment that each of training methods can promote. The results of the survey showed that innovative method using 3D simulation was more effective than conventional lecture method in terms of its lifelikeness, active learning and enjoyment. This study will provide implications that innovative method using the virtual reality is more effective than conventional lecture method.

• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.159-166
• /
• 2023

Due to the aging workforce in the construction industry in South Korea, the accident rate has been increasing. The cognitive abilities of older workers are closely related to both safety incidents and labor productivity. Therefore, there is a need to improve cognitive abilities through personalized training based on cognitive assessment results, using cognitive training content, in order to enable safe performance in labor-intensive environments. The provided cognitive training content includes concentration, memory, oreintation, attention, and executive functions. Difficulty levels were applied to each content to enhance user engagement and interest. To stimulate interest and encourage active participation of the participants, the difficulty level was automatically adjusted based on feedback from the MMSE-DS results and content measurement data. Based on the accumulated data, individual training scenarios have been set differently to intensively improve insufficient cognitive skills, and cognitive training programs will be developed to reduce safety accidents at construction sites through measured data and research. Through such simple cognitive training, it is expected that the reduction of accidents in the aging construction workforce can lead to a decrease in the social costs associated with prolonged construction periods caused by accidents.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.3-11
• /
• 2023

To address the high accident rate in the construction industry, there is a growing interest in implementing virtual reality (VR)-based construction safety training. However, existing training approaches often failed to consider learners' individual characteristics, resulting in inadequate training for some individuals. This study aimed to investigate the impact of personal characteristics on learning performance in VR-based construction safety training using machine learning and SHAP (SHAPley Additional exPlanations). This study revealed that age exerted the greatest influence on learning performance, while work experience had the least impact. Furthermore, age exhibited a negative relationship with learning performance, indicating that the introduction of VR-based construction safety training can be effective for younger individuals. On the other hand, academic degree, qualifications, and work experience exhibited a positive relationship. To enhance learning performance for individuals with lower academic degree, it is necessary to provide content that is easier to understand. The lower qualifications and work experience have minimal impact on learning performance, so it is important to consider other learners' characteristics so as to provide appropriate educational content. This study confirmed that personal characteristics can significantly affect learning performance in VR-based construction safety training, highlighting the potential for leveraging these findings to provide effective safety training for construction workers.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.508-515
• /
• 2022

Construction safety education will continue to attract the interests of construction educators, researchers, and industry professionals due to its immense influence on accident reduction and prevention. A well-educated workforce with a thorough understanding of safety requirements and procedures is needed to develop and apply effective safety and health programs as well as devise strategic means of preventing injuries, illnesses, and fatalities on construction projects. The objective of this research is to evaluate construction safety education in the curriculum of construction programs in the United States. An analysis of construction safety courses across accredited construction programs in the U.S. is conducted to synthesize important details and common themes. A nationwide characterization of the safety courses presented followed by an assessment selected a few programs as a pilot study. Critical elements of the courses such as course titles, course year, credit hours, topics covered, and alignment with professional certification or outreach training courses are characterized. Findings from the study reveal the similarities and variations that exist among safety courses taught in different construction programs in the U.S. These findings could result from several influencing factors, which could be the subject of further investigations geared toward improving safety education in construction programs.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.2
• /
• pp.175-180
• /
• 2021

Recently, there are lacks of construction workers, and such vacancy has been continuously increased in many construction sites. Foreign workers have been hired to fill such vacancy, but increasingly high demands for construction workers made construction companies to hire foreign workers who did not properly pass the health and safety education program. In this work, problems associated with the basic education program for occupational safety and health training, which is the first mandatory requirement for foreign workers, were evaluated to suggest applicable solutions for this program. Literature reviews and preliminary investigations were performed, and a questionnaire survey was conducted for practitioners who were in charge of safety management in various construction sites. Results from survey were analyzed to derive proper methods for improvement on basic education on occupational safety and health training program. It is believed that suggested solution from this work can make foreign workers to be more conscious about health and safety issues, so that it will eventually decrease the accident rate in construction sites.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.122-128
• /
• 2020

This research investigates how a Virtual Reality (VR)-based simulation could be used to train safe operation skills for forklift operators. Forklift operation is categorized as high-risk work by many occupational health and safety regulators and authorities due to high injury and fatality rates involved with forklifts. Therefore, many safety guidelines have been developed for forklift operators. Typically, forklift operation safety training is delivered based on instructional texts or videos, which have limitations in influencing people's safety behavior. Against this background, we propose a VR-based forklift simulator that can enable safe operation skills training through a feedback system. The training program consists of several modules to teach how to perform the basic tasks of forklift operation, such as driving, loading and unloading, following the safety guidelines. The system provides instantaneous instructions and feedback regarding safe operation. This training system is based on the model of "learning-by-doing". The user can repeat the training modules as many times as necessary before being able to perform the given task without violating any safety guidelines. The last training module tests the user's acquisition of all safety skills required. The user feedback from several demonstration sessions showed the potential usefulness of the proposed training system.