• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.967-973
• /
• 2009

Construction and Transportation R&D budget is increased every year. Therefore, outcome is important issue. Also, we must try for practical use of outcome. And we need strategy for practical use of outcome. This is research for the application of research and development outcome. Specially, this research studies about way for construction standard. And this proposes a institutional improvement. First, it catch a problem point with present condition analysis. Second, It executes a survey and analysis. Finally it presents some policy suggestion. This research solves two problems. This applies to the field of research and development outcome. Another this amend construction standard.

• Smart Structures and Systems
• /
• v.26 no.3
• /
• pp.373-390
• /
• 2020

Hybrid simulation (HS) is a versatile tool for structural performance evaluation under dynamic loads. Although real structural responses are often multiple-directional owing to an eccentric mass/stiffness of the structure and/or excitations not along structural major axes, few HS in this field takes into account structural responses in multiple directions. Multi-directional loading is more challenging than uni-directional loading as there is a nonlinear transformation between actuator and specimen coordinate systems, increasing the difficulty of suppressing loading error. Moreover, redundant actuators may exist in multi-directional hybrid simulations of large-scale structures, which requires the loading strategy to contain ineffective loading of multiple actuators. To address these issues, lately a new strategy was conceived for accurate reproduction of desired displacements in bi-directional hybrid simulations (BHS), which is characterized in two features, i.e., iterative displacement command updating based on the Jacobian matrix considering nonlinear geometric relationships, and force-based control for compensating ineffective forces of redundant actuators. This paper performs performance validation and application of this new mixed loading strategy. In particular, virtual BHS considering linear and nonlinear specimen models, and the diversity of actuator properties were carried out. A validation test was implemented with a steel frame specimen. A real application of this strategy to BHS on a full-scale 2-story frame specimen was performed. Studies showed that this strategy exhibited excellent tracking performance for the measured displacements of the control point and remarkable compensation for ineffective forces of the redundant actuator. This strategy was demonstrated to be capable of accurately and effectively reproducing the desired displacements in large-scale BHS.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.289-290
• /
• 2021

The PC system has advantages in terms of project management, such as shortening the construction period and reducing costs. However, it is difficult to activate the technology due to insufficient application of the technology. Therefore, there is a need for a strategy to expand and activate the PC system. This study is a basic research for PC construction project management, and its purpose is to derive the entire construction process from factory production of PC components to on-site construction. In this study, the construction process of the PC system was derived through literature review, and the main matters for the construction process management of PC system were confirmed in the analysis process. In the future, the results of this study are expected to be used as basic data for research for PC project management, such as deriving construction classification and calculating construction periods.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.281-285
• /
• 2004

The purpose of this study is to present an effective management model for planning phase of architect office in korea. The research method of this study includes a questionnaire survey and statistical analysis. The results of this study are as follows; The suggested model for planning and management involves business strategy, manpower strategy, technical strategy and marketing strategy. It is verified by correlation analysis and multiple linear regression from the questionnaire survey data.

• Smart Structures and Systems
• /
• v.32 no.6
• /
• pp.359-369
• /
• 2023

Servo-motor driven uniaxial shake tables have been widely used for education and research purposes in earthquake engineering. These shake tables are mostly displacement-controlled by a digital proportional-integral-derivative (PID) controller; however, accurate reproduction of acceleration time histories is not guaranteed. In this study, a control strategy is proposed and verified for uniaxial shake tables driven by a servo-motor. This strategy incorporates a deep-learning algorithm named Long Short-Term Memory (LSTM) network into a displacement PID feedback controller. The LSTM controller is trained by using a large number of experimental data of a self-made servo-motor driven uniaxial shake table. After the training is completed, the LSTM controller is implemented for directly generating the command voltage for the servo motor to drive the shake table. Meanwhile, a displacement PID controller is tuned and implemented close to the LSTM controller to prevent the shake table from permanent drift. The control strategy is named the LSTM-PID control scheme. Experimental results demonstrate that the proposed LSTM-PID improves the acceleration tracking performance of the uniaxial shake table for both bare condition and loaded condition with a slender specimen.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.5
• /
• pp.109-118
• /
• 2007

It is related to launch the CM market and to increase the profit and entire ability in company that is enforcing the ability of construction management in large-scaled construction company. According to the CM market in U.S, CM market is increased with competing to the companies, that is E&C, general contractor, design firm, specialized CM firm. Also domestic market is similar to US market. In this situation, large-scaled construction companies are filled with construction management ability for competing with foreign companies and domestic CM firms. This paper suggests how to enforce the construction management ability through education, and shows the detailed education strategy considered the fields, divisions and positions.

• The Journal of Society for e-Business Studies
• /
• v.6 no.3
• /
• pp.181-196
• /
• 2001

This paper presents a fundamental study to establish a standardization system of the Construction Continuous Acquisition and Life-cycle Support(CALS). A state of the art in standardization of the Construction CALS is reviewed to find some defects in developing CALS system in construction industry. It is analyzed that three major parts were needed to set up a standardization system for the Construction CALS. Firstly, the range of Construction CALS standardization is set up to identifying Construction CALS and defining the standards and standardization. Secondly, the strategy to carry out more effectively in Construction CALS standardization and make the relationship of the concerned system presented here can be used to establish the Construction CALS standardization system. In addition, the spread and application device are proposed to use Construction CALS standards at public institution and construction related companies. Conclusively, a classification of the Construction CALS standards was proposed and some objects to be standardized were represented in that. Results studied in this paper will provide the primary information and basic model to develop a guideline for standardization of the Construction CALS.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.141-154
• /
• 2001

This paper presents a fundamental study to establish a standardization system of the Construction Continuous Acquisition and Life-cycle Support(CALS). States of standardization in the Construction CALS were reviewed to find some defects in developing CALS system in construction industry. It is analyzed that three of major parts were needed to put up a standardization system for the Construction CALS. Firstly, the range of Construction CALS standardization is set up by identifying of Construction CALS and defining the standard and standardization. Secondly, the strategy to enable more effective implementation of Construction CALS standardization and the relationship of the concerned system presented can be used for establishing the Construction CALS standardization system. In addition, the spread and application device is proposed for using Construction CALS standards at public institutions and construction related companies. Conclusively, a classification system of the Construction CALS standards was proposed and some objects to be standardized were presented in the classification system. What were studied in this paper will provide the primary information and guidance to develop a guideline for standardization of the Construction CALS.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.5
• /
• pp.23-28
• /
• 2009

BIM technology has been introduced in various fields of the construction industry recently. The owners of the public construction projects are already interested in BIM technology and they started to apply BIM technology in their projects. This paper introduces the successful BIM cases of overseas and domestics projects and shows how to introduce and apply BIM technology in the architectural design firms and construction companies and how to train their engineers with BIM technology.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.49-55
• /
• 2010

A series hydraulic hybrid vehicle(SHHV) concept has been explored as a potential pathway to an ultra-efficient city vehicle. Improvements in SHHV fuel economy with reduced emissions strongly depend on their supervisory control strategy. Thermostatic control is simple and reliable but it's cause of frequent engine on-off. Therefore, power follower strategy is presented. In this paper, thermostatic control strategy and power follower strategy is compared for the SHHV model developed using AMESim.