• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.1
• /
• pp.40-49
• /
• 2004

In this paper, vibration response of aerial gas pipeline due to vehicle loads was quantitatively estimated through experiment and analysis in open cut construction site. The vehicle vibration of various construction machines causes serious effect to the aerial gas pipeline. The new vibration prediction equations presented in this study can estimate the vibration velocity response of the aerial gas pipeline. In the nitration prediction equations, the vehicle′s weight and traveling velocity, which are the sources of vibration, are combined into the term called, "scaled weight" Methods to reduce vibration were proposed in case the vibration velocity response of the gas pipeline exceeded the vibration criterion, using the vibration prediction equations presented in this study. One was to limit the vehicle′s traveling velocity and the other to install the isolation equipment. Both methods can be estimated quantitatively.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.899-905
• /
• 1999

Construction equipment noise has caused much annoyance for a number of dwellers in nearby construction field and has become a very serious issure in our living environment. Therefore, in our country, a practical solution and a better method of reducing construction equipment noise are highly required in construction field. Practical solutions for the construction equipment noise, however, are very difficult because of the poorness of basic data and insufficiency of the existing research. Especially, in order to establish the sound insulation plan about pilling works noise with high sound pressure level and impactive, a real situation of sound characteristics about the noise of pilling works in foundation work demands more detail investigation. In this point, this study attempts to survey the characteristics of attenuation and propagation of construction equipment noise in pilling work using SIP(soil-cement injected precast pile) method with casing. And this study intends to get the basic data for establishment of a standard about construction noise.

• Explosives and Blasting
• /
• v.20 no.3
• /
• pp.59-71
• /
• 2002

The points of this design case are the planning and excavation method of a new double-tracked railroad tunnel which is approx. 11∼22 meters apart from existing single-tracked railroad tunnel. For the optimum excavation method some needs are required in design stage, such as the reduction of noise and vibration, public resentment, damage of buildings and construction costs. Hence the estimation and application of allowable noise and vibration criterion is important. The ground coefficient (K, n) of this site is determined by field trial blasting. The excavation method is chosen to satisfy the allowable noise and vibration criterion. In addition, in order to ensure the stability of existing single-tracked railroad tunnel, the instrumentation of maintenance level is accompanied during the construction stage. As a result of this design condition, central diaphragm excavation with line drilling and pre-large hole boring blasting is applied to the area within 15 meters apart from existing tunnel. And above 15 meters apart, pre-large hole boring blasting is designed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.737-740
• /
• 2004

The interior noise reduction of construction equipment is concerned for improving the driver comfort in this study. From the baseline test, the exhaust noise gives a big contribution to the interior noise of construction equipment. And the detail noise contribution analysis of the exhaust system, the tail pipe, which is for ventilation an engine room hot air to outside, amplify the exhaust noise around operating engine RPM associated with tail pipe structural and cavity resonances. To remove the noise amplifying effects, the tail pipe has to be shorted its length. Even the noise can be attenuated the ventilation flux when using the redesigned tail pipe is reduced than the original one. Thus, a shape change of the tail pipe is additionally needed for increasing the ventilation flux and attenuating the exhaust noise using CFD technique. The CFD results of the tail pipe give a meaning full information what obstructs the ventilation flex in the current design and how changes the tail pipe.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.654-657
• /
• 2014

In this paper, we study the analytical method to predict the excitation forces for the engine system. The engine system on the construction equipment is one of the important power sources, and the characteristics of the engine decide the performance of noise and vibration for the equipment. We predict the excitation forces using the geometrical data of the crank system and the combustion pressure in the cylinder. The excited forces are represented by the torque fluctuation above the center of the crank shaft.

• Journal of Sensor Science and Technology
• /
• v.27 no.2
• /
• pp.126-131
• /
• 2018

Unlike the hydraulic power steering (HPS) system, which operates by the high pressure of a fluid obtained from the engine power, the motor-driven power steering (MDPS) system uses an electric motor to steer the wheel without consuming engine power. To steer the wheel with an electric motor, a worm wheel and a worm gear rotating between the steering shaft and motor are required. Any imperfection during the construction of an MDPS system or in a composing part creates noise and vibration, which can be sensed by a driver. To solve the noise and vibration problems, each part must be designed to not resonate with other parts. In this work, we developed the measurement and analysis systems to obtain the noise and the vibration of an automobile MDPS system. A signal analyzer was equipped with a 96 kHz, 24-bit ADC and a 150 MHz digital signal processor. The predetermined threshold value of the vibration in the MDPS system was used to determine the pass/fail, and the results were displayed on the screen. Our system can be used in the fabrication line to swiftly determine any imperfections in the MDPS system construction.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.9
• /
• pp.960-966
• /
• 2009

The World Health Organization(WHO) has reported the sleep disturbance as one of the adverse effects of noise. And the effect of combined noise sources on human have been investigated because community noises are seldom heard and are concurrent. Therefore, the effects of combined noise source and its S/N ratio on sleep disturbance were investigated; as a single noise source, road traffic noise was selected, and construction and movie noise were combined with road traffic noise. Tests for sleep disturbance were conducted in bedrooms and the effect on each subjects' sleep was evaluated by questionnaire. The results showed that the rate of awakening increased slightly only when the SPL of construction noise was 10 dB higher than that of road traffic noise. It was also found that the sleep disturbance was affected by the type of combined noise sources and its S/N ratio.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.310-318
• /
• 2011

Due to the lack of a noise and vibration survey for military air bases, noise and vibration are not taken into consideration for new installations, which has resulted in a number of problems, including the separation of tiles. Furthermore, it is not possible to establish appropriate counter-vibration plans to minimize damage resulting from vibration on structures, since no standard is in place when location for residence areas, including military quarters, is determined. In this context, this research includes a noise and vibration survey, on which basis a quantitative evaluation model for vibration of structure by aircraft noise is generated, as well as through linear regression analysis, and suggests installation standards by purpose of structure, minimizing the damage due to noise and vibration, and establishing appropriate counter-vibration plans for future installation and repairs of on-base structures in the military bases.

• Journal of Drive and Control
• /
• v.2 no.3
• /
• pp.20-27
• /
• 2005

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.268-271
• /
• 2008

A sound-masking technique was applied to the urban public spaces with multiple noises in order to reduce the annoyance of the construction and traffic noise. In addition, the effects of masking system were investigated in order to improve the soundscape. In several urban spaces, building construction and nearby road traffic noise were recorded using a head and torso simulator and sound quality (SQ) system which specifies the spectral and temporal aspects of the noises. The sound-masking system which consists of the distributed speakers and control devices was applied to the boundaries of the construction sites. Synthesized masking sounds were produced with consideration of SQ characteristics of the multiple noise. Subjective evaluations on the soundscape were conducted to verify effectiveness of the system under the conditions with and without the masker sounds.