• 한국세라믹학회지
• /
• 제43권5호
• /
• pp.270-276
• /
• 2006

LSGM(($La_xSr_{1-x})(Ga_yMg_{1-y})O_3$) electrolyte is known to show very serious interfacial reaction with other unit cell components, especially with an anode. Such an interfacial reaction induced the phase instability of constituent component and deterioration of the unit cell performance, which become the most challenging issues in LSGM-based SOFCs. In this study, we fabricated LSGM($La_{0.8}Sr_{0.2}Ga_{0.83}Mg_{0.17}O_x$) electrolyte supported-type cell in order to avoid such interfacial problem by lowering the heat-treatment temperature of the electrode fabrication. According to the microstructural and phase analysis, there was no serious interfacial reaction at both electrolyte/anode and electrolyte/cathode interfaces. Moreover, from the electrochemical characterization of the unit cell performance, there was no distinct deterioration of the open cell voltage as well as an internal cell resistance. These results demonstrate the most critical point to be concerned in LSGM-based SOFC is either to find a proper electrode material which will not give any interfacial reaction with LSGM electrolyte or to properly adjust the processing variables for unit cell fabrication, to reduce the interfacial reaction.

• 한국주조공학회지
• /
• 제39권2호
• /
• pp.21-25
• /
• 2019

Microstructural and corresponding hardness changes of TiFe compounds with Zr (0~6 at%) or Ce (0~3 at%) were studied using samples prepared at different solidification rates. In arc-melted (TiFe)-Zr samples, the $Fe_{23}$ $Zr_6$ and $(Ti,\;Zr)_2Fe$ phases formed in the TiFe matrix, while in the (TiFe)-Ce sample, the $CeO_2$ phase formed along the grain boundary of the TiFe matrix. As the Zr content was increased, the volume fractions of the $Fe_{23}$ $Zr_6$ and $(Ti,\;Zr)_2Fe$ phases increased, forming a network structure. Accordingly, the hardness values of the samples also increased. With a small addition of Ce of approximately 0.1 at%, the as-cast microstructure could be effectively refined, reducing the average grain boundary diameter from ${\sim}100{\mu}m$ to ${\sim}14{\mu}m$. In the rapidly solidified sample prepared through a melt-spinning method, the constituent phases were identical to those of the arc-melted samples while the grains were refined. The microstructural changes of TiFe alloys can affect the hydrogen storage ability as well as the mobility of the hydrogen atoms in the alloys.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4798-4808
• /
• 2022

The porous corrosion deposits (known as CRUD) adhered to the cladding have an important effect on the heat transfer from fuel rods to coolant in PWRs. The vapor film is the main constituent in the two-phase film boiling model. This paper presents a vapor film thickness correlation, associated with CRUD porosity, CRUD chimney density, CRUD particle size, CRUD thickness and heat flux. The dependences of the vapor film thickness on the various influential factors can be intuitively reflected from this vapor film thickness correlation. The temperature, pressure, and boric acid concentration distributions in CRUD can be well predicted using the two-phase film boiling model coupled with the vapor film thickness correlation. It suggests that the vapor thickness correlation can estimate the vapor film thickness more conveniently than the previously reported vapor thickness calculation methods.

• 한국해양학회지:바다
• /
• 제6권1호
• /
• pp.1-12
• /
• 2001

Topex/Poseidon(T/P)고도계 자료를 조석 수치 모델에 혼합하여 북동 아시아 해역의 $M_2,\;S_2,\; K_1$, 및 $O_1$ 분조를 $5'{\times}5'$ 분해능으로 계산하여, 북동 아시아의 조석을 산정하였다. Blending 방법에 사용되는 가중 인자 값에 대한 모델반응을 검토하기 위해 $M_2$ 분조만을 고려한 수치 실험이 수행되었으며, 수치 실험을 통해 T/P 자료를 정확히 재현하되 혼합함으로써 발생하는 잡음을 줄이기 위해 가중 인자 값은 수심의 평방근에 반비례하도록 설정하였다. T/P자료에서 구한 $M_2,\;S_2,\; K_1$, 및 $O_1$ 분조를 동시에 혼합한 수치 모델 결과는 연구 해역 내의 모든 T/P궤도 자료와 비교되었다. 진폭 오차와 지각 오차의 평균은 거의 0으로 나타났다. 진폭 오차의 표준 편차는 2 cm 내외였으며, 지각오차의 표준 편차는 $10^{\circ}$보다 작았다. T/P자료를 혼합한 모델 결과는 특히 얕은 수심(h<250m)의 T/P 궤도 자료와 거의 일치하는 것으로 나타났다. 그러나 T/P 자료만으로부터 계산된 진폭과 지각은 깊은 수심 해역에 대해서는 불합리한 공간 변화를 보이는 반면, 이들 자료를 동화시킨 모델 결과는 T/P 자료와는 차이를 보이나 합리적인 진폭과 지각의 공간 분포를 보였다. 한편 T/P자료를 혼합한 모델 결과는 자료 동화에 사용하지 않은 연안 관측 자료와도 비교적 잘 일치하였다.

• 자원환경지질
• /
• 제45권4호
• /
• pp.351-363
• /
• 2012

본 연구는 부존광체 평가기술 개발을 위해 수행된 것으로 황화광물, 산화광물 및 스카른 광물에 대한 모달 함량비(vol%), 입자크기, 조직의 특성에 따라 나타나는 광대역 유도분극(Spectral Induced Polarization, SIP) 반응특성의 관련성 파악에 초점을 두고 있다. 테스트베드로 강원도 삼척시에 위치한 가곡 연 아연 스카른 광상에서 채취된 9개의 시추코어를 선정하였으며, 이 지역의 연 아연광화대는 캠브리아기 천해성 셰일과 석회암이 혼재된 묘봉슬레이트층과 대륙붕 탄산염 퇴적물로 이루어진 풍촌석회암층의 접촉부를 따라 관입한 백악기 석영몬조니암 성분의 화강반암과의 접촉부를 따라 형성되어 있다. 본 연구에 사용된 9개의 시추코아 시료는 육안 관찰시 비교적 스카른광물 함량이 높으며, SIP 반응이 높은 것(그룹 I), 중간 것(그룹 II), 낮은 것(그룹 III)의 세 개의 그룹으로 구별되고 있다. 그룹 I 암석은 자류철석(25-38 vol.%)과 각섬석(40-55 vol.%)의 모달 함량이 가장 높으며 가장 조립질의 특성을 보이고, 그룹II 시료는 자류철석(7-13 vol.%)의 함량이 비교적 낮으며 석류석(44-68 vol.%)의 모달 함량이 높고 광물 입자는 대체로 세립으로 나타난다. 그룹 III 암석은 자류철석(1-7 vol.%)의 모달 함량이 가장 낮고 휘석(24-66 vol.%)의 함량이 가장 높으며, 광물입자는 매우 세립질인 것이 특징이다. 암석을 구성하고 있는 주요 광물인 자류철석의 입자크기도 그룹 I (≅ 5 mm, < 2.5 mm)에서 그룹 II (< 2.5 mm), 그룹 III (< 1.6 mm)으로 가면서 세립화되는 경향을 보인다. 이들 세 그룹의 자류철석의 모달 함량, 입자의 크기는 SIP반응 상관관계 다이아그램에서 체계적인 지수함수의 관련성을 가지고 대비된다. SIP 반응특성과 황화광물의 모달함량비 사이에 이러한 체계적인 관련성이 존재한다는 것은 부존광체 평가기술 개발에 의미 있는 데이터를 도출하게 될 것으로 여겨진다.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.120-120
• /
• 1998

Boron nitride (BN) films have attracted a growing interest for a variety of t technological applications due to their excellent characteristics, namely hardness, c chemical inertness, and dielectrical behavior, etc. There are two crystalline phases 1551; of BN that are analogous to phases of carbon. Hexagonal boron nitride (h-BN) has a a layered s$\sigma$ucture which is spz-bonded structure similar to that of graphite, and is t the stable ordered phase at ambient conditions. Cubic boron nitride (c-BN) has a z zinc blende structure with sp3-bonding like as diamond, 따ld is the metastable phase a at ambient conditions. Among of their prototypes, especially 삼Ie c-BN is an i interesting material because it has almost the same hardness and thermal c conductivity as di없nond. C Conventionally, significant progress has been made in the experimental t techniques for synthesizing BN films using various of the physical vapor deposition 밍ld chemical vapor deposition. But, the major disadvantage of c-BN films is that t they are much more difficult to synthesize than h-BN films due to its narrow s stability phase region, high compression stress, and problem of nitrogen source c control. Recent studies of the metalorganic chemical vapor deposition (MOCVD) of I III - V compound have established that a molecular level understanding of the d deposition process is mandatory in controlling the selectivity parameters. This led t to the concept of using a single source organometallic precursor, having the c constituent elements in stoichiometric ratio, for MOCVD growth of 삼Ie required b binary compound. I In this study, therefore, we have been carried out the growth of h-BN thin f films on silicon substrates using a single source precursors. Polycrystalline h-BN t thin films were deposited on silicon in the temperature range of $\alpha$)() - 900 $^{\circ}$C from t the organometallic precursors of Boron-Triethylamine complex, (CZHs)3N:BRJ, and T Tris(dimethylamino)Borane, [CH3}zNhB, by supersonic molecular jet and remote p plasma assisted MOCVD. Hydrogen was used as carrier gas, and additional nitrogen w was supplied by either aDlIDonia through a nozzle, or nitrogen via a remote plasma. T The as-grown films were characterized by Fourier transform infrared spectroscopy, x x-ray pthotoelectron spectroscopy, Auger electron spectroscopy, x-ray diffraction, t transmission electron diffraction, optical transmission, and atomic force microscopy.roscopy.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권16호
• /
• pp.7337-7342
• /
• 2015

The study aimed to investigate the profile of alkaloids in two ethyl acetate soluble fractions, namely fractions A and B from an ethanolic extract of Ficus septica leaves and cytotoxic effect on T47D breast cancer cells. Preparation of both fractions involved maceration of leaves with 70% (v/v) ethanol, filtration with $Al_2O_3$, precipitation with 0.1 N HCl, Mayer reagent, and 0.1 N NaOH, and also partition with ethyl acetate. Qualitative thin layer chromatography (TLC) was conducted to determine the profile of alkaloids in the two fractions, using alkaloid specific reagents such as Dragendorff, sodium nitrite, and Van Urk-Salkowski. Cytotoxic effects of both fractions on T47D cells were evaluated using MTT assay with a concentration series of 1.56; 3.12; 6.25; 12.5; 25 and $50{\mu}g/mL$. The TLC test showed that fractions A and B contained alkaloids with Rx values of 0.74 and 0.80 for fraction A and 0.74, 0.84, 0.92 for fraction B with regard to yohimbine using the mobile phase of n-buthanol:glacial acetic acid:distilled water (3:1:1 v/v/v). Moreover, an indole alkaloid was detected with Rx values of 0.80 and 0.84, respectively. Fractions A and B exhibited high cytotoxic effects on T47D cells with IC50 values of 2.57 and $2.73{\mu}g/mL$, respectively. In conclusion, overall the results of this study showed that fractions of Ficus septica contain alkaloids including indole alkaloid or its derivatives and possess a cytotoxic effect on T47D cells. This research supports the idea that alkaloids in F. septica have anticancer activity.

• 한국수소및신에너지학회논문집
• /
• 제24권3호
• /
• pp.237-241
• /
• 2013

The correlation between NiO-YSZ microstructure and its electrical property used for SOFC anode was critically evaluated with image processing and direct measurement techniques. These innovative processing techniques were employed to quantify the contiguity of the anode constituent phase. The calculated contiguities were then correlated with electrical conductivity attained from 4-probe DC method. This investigation described that contiguity of nickel oxide phases of an anode has a linear relationship with its electrical conductivity. We observed that the contiguity of NiO increased from 0.18 to 0.50 then electrical conductivity attained was significantly increased from 520 S/cm to 1468 S/cm at $900^{\circ}C$.

• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.322-330
• /
• 2007

Because 6sigma is doing innovative success In management whole, estimate that can exert direct effect in interior Design management. Therefore, this study did by purpose that 6sigma that is scientific method that do customers satisfaction by ultimate purpose acts as basic study that can heighten practical use Possibility and result of interior Design management and value by interior design standardization process. Need to use marketing data that is scientific design component at schematic design step for successful interior design that can improve result. Hereupon, this study is doing to big dimension that utilizes 6sigma and makes standard process of only Interior Design, and did to dimension that present study phase verifies if '6sigma' is practical use possibility by intoner design process. Did by method that verification method of 6sigma practical use possibility analyzes "Information transmission efficiency improvement of department store display space" 6sigma project example. When see that example project is analyzed on Improvement constituent that "Design improvement" out of Vital few Xs of statistical analysis item must heighten the customers satisfaction rate conclusively, target process might be established because design becomes center of gravity if did design improvement very first time. Finally, possibility that 6sigma can utilize in process of interior design is verified, and it is scientific methodology that can utilize to all business members that there are not any special category of business even if is in practical use. Such scientific 6sigma method need persistent study that make standard process analyzing a lot of problems that is expected to be beaconed and happens substantially in here after to management development of interior design.