• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.357-364
• /
• 2016

Purpose: This study was performed to define the drying characteristics of sorghum by developing thin layer drying equations and evaluating various grain drying equations. Thin layer drying equations lay the foundation characteristics to establish the thick layer drying equations, which can be adopted to determine the design conditions for an agricultural dryer. Methods: The drying rate of sorghum was measured under three levels of drying temperature ($40^{\circ}C$, $50^{\circ}C$, and $60^{\circ}C$) and relative humidity (30%, 40%, and 50%) to analyze the drying process and investigate the drying conditions. The drying experiment was performed until the weight of sorghum became constant. The experimental constants of four thin layer drying models were determined by developing a non-linear regression model along with the drying experiment results. Result: The half response time (moisture ratio = 0.5) of drying, which is an index of the drying rate, was increased as the drying temperature was high and relative humidity was low. When the drying temperature was $40^{\circ}C$ at a relative humidity (RH) of 50%, the maximum half response time of drying was 2.8 h. Contrastingly, the maximum half response time of drying was 1.2 h when the drying temperature was $60^{\circ}C$ at 30% RH. The coefficient of determination for the Lewis model, simplified diffusion model, Page model, and Thompson model was respectively 0.9976, 0.9977, 0.9340, and 0.9783. The Lewis model and the simplified diffusion model satisfied the drying conditions by showing the average coefficient of determination of the experimental constants and predicted values of the model as 0.9976 and Root Mean Square Error (RMSE) of 0.0236. Conclusion: The simplified diffusion model was the most suitable for every drying condition of drying temperature and relative humidity, and the model for the thin layer drying is expected to be useful to develop the thick layer drying model.

• 한국농공학회지
• /
• 제17권1호
• /
• pp.3677-3684
• /
• 1975

A newly devised dryer with heated air for the farm products, especially suited for high water content materials such as red pepper, Beer ground, each Vegetables, and Low water content materials such as Rough rice was tested for its thermal efficiency and drying mechanism, and the optimum conditions for each sample were established. In order to improve the present rural situation of drying farm products which entirely dependent upon natural solar radiation, a study upon an economic multi-parpose dryer was conducted. A series of drying tests were run first with red pepper which is one of the important cash crop in Korean farm. And successive series of tests were also run with such proaucts as garlic, sweet potatoes, green onion, radish, Beer ground and Rough rice. The results from the above experiment in drying system with heat dryer can be summarized as follows. 1. Drying duration could be shortened by the tempering effect in high water content crop such as red pepper and beer ground. 2. The color changes occured in around 20% water content in red pepper. The degree of color change was heavily affected by high temperature and short drying duration. 3. The drying condition of red pepper was most favourable at the temperature of 85$^{\circ}C$ in early stage and 80$^{\circ}C$ in middle stage and 75$^{\circ}C$ at the final stage, and with the air rate of 0.81㎥/sec and with sample amount of 200kg. 4. The drying condition of Rough rice(I.R.667) was most favourable at the templature of 40$^{\circ}C$ in early stage and 35$^{\circ}C$ in middle stage and final stage and with the air rate of 0.2㎥/sec and with sample amount of 75kg. 5. In order to prevent the color change of red pepper and to assure high efficiency in drying mechanism, it was necessary to lower the temperature as the time passes in drying process. 6. For vege tables, the drying rate were short in early stage and there was also tempering effect. However, for garlics, Constant drying rates through the early and final stages were observed and there were no tempering effects. 7. The drying condition or capability were as follows; Sample drying temp($^{\circ}C$) amount of material(kg) drying time(hr) Red pepper 85 200 9 Garlic 85 150 7 Sweet potato 85 200 6 Green Onion 85 200 4 Carrot 85 200 4 Radish 90 250 4 Rough rice(I.R.667) 35 75 4 Beer ground 90 320 3 Considering the above result of experiments, if this kind of dryers were distributed Korean farm and the optimun process were practiced in rural area, it would certainly help them improving the qualites of their product preventing their undue losses, and thus assuring an increase of Korean farm income and promotion of their living standards.

• 한국식품과학회지
• /
• 제18권1호
• /
• pp.61-65
• /
• 1986

홍옥(紅玉)을 시료(試料)로 하여 건조조건(乾燥條件)을 다르게하여 건조특성(乾燥特性), 수분이동현상(水分移動現像), 건조중(乾燥中) 시료온도(試料溫度) 및 내부수분(內部水分)의 분포(分布)를 조사하였다. 사과의 수분확산계수(水分擴散係數)는 $1.1470{\sim}2.2148{\times}10^{-5}cm^2/sec$, 확산활성화(擴散活性化)에너지는 6.6 kcal/g mole 이었으며 Fick's law에서 아래의 식을 유도할 수 있었다. $${\In}\;{\Delta}t=In\;{\Delta}to-{\frac{D{\pi}^2{\theta}}{4d^2}}$$ 건조중(乾燥中) 내부수분분포(內部水分分布)의 이론치(理論値)와 실측치(實測値)는 거의 일치하였다.

• Journal of Biosystems Engineering
• /
• 제42권3호
• /
• pp.190-198
• /
• 2017

Purpose: A thin-layer drying equation was developed to analyze the drying processes of soybeans (white and black beans) and investigate drying conditions by verifying the suitability of existing grain drying equations. Methods: The drying rates of domestic soybeans were measured in a drying experiment using air at a constant temperature and humidity. The drying rate of soybeans was measured at two temperatures, 50 and $60^{\circ}C$, and three relative humidities, 30, 40 and 50%. Experimental constants were determined for the selected thin layer drying models (Lewis, Page, Thompson, and moisture diffusion models), which are widely used for predicting the moisture contents of grains, and the suitability of these models was compared. The suitability of each of the four drying equations was verified using their predicted values for white beans as well as the determination coefficient ($R^2$) and the root mean square error (RMSE) of the experiment results. Results: It was found that the Thompson model was the most suitable for white beans with a $R^2$ of 0.97 or greater and RMSE of 0.0508 or less. The Thompson model was also found to be the most suitable for black beans, with a $R^2$ of 0.97 or greater and an RMSE of 0.0308 or less. Conclusions: The Thompson model was the most appropriate prediction drying model for white and black beans. Empirical constants for the Thompson model were developed in accordance with the conditions of drying temperature and relative humidity.

• Journal of Biosystems Engineering
• /
• 제25권2호
• /
• pp.115-122
• /
• 2000

This study was performed to develop a prototype continuous flow ginseng dryer with which better product quality and lower drying energy consumption could be achieved compared with conventional ginseng dryers. A dryer having both far infrared ray (IR) and heated-air as the drying energy sources was designed and fabricated . Dryer performance was studied by examining energy efficiencies and dryer performance evaluation indices (DPEI) during the drying tests of medium-sized four year ginseng roots with IR radiating plate temperature and drying air temperature in the range of 80-12$0^{\circ}C$ and 22-5$0^{\circ}C$, respectively. The DPEI of IR /heated -air combined drying was 1/3 of that of the conventional heated-air drying when ginseng were dried to the same final moisture ratio. When ginsengs were dried for 12 hours in the prototype IR/heated-air combination dryer, a linear relationship was found to exist between final moisture ratio and ginseng temperature. As the drying progressed, drying air temperature inside the dryer was nearly constant but ginseng temperature was drastically increased during the first two hours and gradually increased thereafter until the end of drying. With the prototype Ir/heated-air combination dryer, the drying rate changed little but the energy efficiency increased proportionally when the amount of ginseng to be dried increased. Drying capacity, energy efficiency, and DPEI of the prototype IR/heated-air combination ginseng dryer were estimated to 1.500 roots, 65% and 3.800kJ/kg-water , respectively.

• 한국식품과학회지
• /
• 제18권5호
• /
• pp.351-356
• /
• 1986

단(單)원통형 및 원통형 드럼건조기를 이용하여 잘게 저민 생선으로부터 플레이크를 성공적으로 만들 수 있었다. 생선의 높은 지방함량으로 인해 저민 생선이 드럼에 잘 들러붙지 않는 문제점은 타피오카가루의 형태로 2.5%의 전분을 저민 생선에 첨가함으로서 건조양상에는 영향을 미치지 않으면서 해결될 수 있었다. 제품의 수분함량을 일정한 수준으로 유지할 경우 건고형분(乾固形分)의 생산속도는 드럼간의 간격을 최소로 줄였을때 최고에 도달하였다. 건고형분(乾固形分)의 생산속도는 드럼의 회전속도가 증가할수록 선형적으로 증가하였고 제품의 품질이 손상되지 않는 범위에서 스팀의 압력이 높을수록 증가하였다. 총괄 열전달계수는 드럼의 회전수가 증가함에 따라 증가한 반면에 드럼간의 간격이 커짐에 따라 증가하지는 않았다. $MR\;=\;A\;\exp(\;-k{\theta})$로 표시되는 가장 보편적인 건조 모델식이 드럼건조에도 적용될 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.125-126
• /
• 2021

In order to improve the housing culture, construction changes for the utilization of diverse and multifunctional spaces are appearing in response to the increasing diverse needs of consumers. Cellular Light-weight Concrete (CLC) is being developed for use in fire-resistant heat-insulating walls and non-bearing walls. However, manufacturing non-uniformity has become a problem as a drawback due to the use of foamed bubbles and normal temperature curing, and additional research is required. Therefore, in order to suppress cracks due to drying shrinkage, silica sand is mixed with CLC to try to understand its characteristics. In the experiment, the compressive strength from 7 to 28 days of age was measured via a constant temperature and humidity chamber, and the drying shrinkage was analyzed according to each condition using a strain gauge. The compressive strength of matrix tends to decrease as the substitution rate of silica sand increases. This is judged by the result derived from the fact that the specific surface area of silica sand is smaller than that of slag. Based on KS F 2701 (ALC block), the compressive strength of 0.6 products is 4.9 MPa or more as a guide, so the maximum replacement rate of silica sand that satisfies this can be seen at 60%. Looking at the change in drying shrinkage for just 7 days, the shrinkage due to temperature change and drying is 0.7 mm, and the possibility of cracking due to shrinkage can be seen, and it seems that continuous improvement and supplementation are needed in the future.

• 한국식품과학회지
• /
• 제10권4호
• /
• pp.398-403
• /
• 1978

고체입자를 열매체로 유동화시킨 유동층내에서 오징어를 고정시켜 건조시킬 때 유동화입자, grid로 부터의 오징어 고정위치, 온도가 오징어의 건조속도와 품질에 미치는 영향을 검토하였으며 또한 감율건조기간중 수분의 이동 메카니즘을 추론하였다. 1) 유동화입자로는 식염이 가장 바람직했고 풍속 3.8 m/sec에서 최적 유동화상태를 얻었다. 2) 유동층내에서의 균일온도 분포는 grid로 부터 4 cm 이상거리에서 얻었으며 따라서 오징어의 고정위치는 이 거리 이상에서 바람직한 것으로 관찰되었다. 3) 풍속 3.8m/sec, grid로부터 4 cm 이상되는 오징어의 고정위치에서 건조속도에 대한 최적온도는 $35^{\circ}C$에서 얻었으며 이 조건에서 초기수분 80.8%로 부터 최종수분 $18{\sim}22%$까지 건조하는 데 소요되는 시간은 8.5시 간 이었다. 4) 건조자료는 측정된 수분함량범위에서 비정상상태의 확산방정식 $ln{\frac{(W-We}{(Wc-We)}=-m{\theta}$의 경험식에 따랐으며 m의 값은 $0.32hr^{-1}$로 계산되었다. 또 이들 결과는 감율 건조기간중 수분의 이동이 액체확산에 의한 것임을 시사했다. 5) 오징어의 건조는 초기 짧은 시간 동안만 항율건조되고 그 이후는 감율건조에 의해 지배되는 것으로 나타났으며 동일온도에서 동일잔존수분까지 건조시키는 데 소요되는 유동층건조에 대한 통기 열풍건조의 건조시간비율은 1 : 1.4였다. 6) 유동충건조된 오징어 제품은 시판 천일건조 오징어 제품과 비교하여 품질상 유의차가 없었다.

• Journal of Pharmaceutical Investigation
• /
• 제24권2호
• /
• pp.85-94
• /
• 1994

Inclusion complexes of ketoconazole (KT) with ${\alpha}-$, ${\beta}-cyclodextrin$ (CD) and dimethyl-${\beta}-cyclodextrin$ $(DM{\beta}CD)$ in a molar ratio of 1:2 were prepared by freeze-drying and solvent evaporation methods. The interactions of KT with ${\alpha}-CD$, ${\beta}-CD$ and $DM{\beta}CD$ in aqueous solution and in solid state were investigated by solubility study, infrared (lR) spectroscopy and differential scanning calorimetry (DSC). The stability constant of $KT-DM{\beta}CD$ inclusion complex (lC) was found to be the largest among three inclusion complexes. Clear differences in IR spectra and DSC curves were observed between inclusion complexes and physical mixtures (PM) of KT-CDs. It was also shown by IR spectra and DSC curves that solvent evaporation method might be. superior to the freeze-drying method in preparing the inclusion complexes of KT-CDs. The dissolution rate of KT was markedly increased by inclusion complex formation with CDs in the buffer solution at pH 4.0 and pH 6.8. The mean dissolution time (MDT,min), which represents the rapidity of dissolution, was in the order of $KT-DM{\beta}CD$ IC (3.20) < $KT-{\beta}-CD$ IC (4.36) < $KT-{\alpha}-CD$ IC (6.99) < $KT-{\alpha}-CD$ PM (17.46)< $KT-{\beta}-CD$ PM (19.36) < $KT-{\beta}-CD$ PM (28.53). The dissolution rates of KT-CD ICsprepared by solvent evaporation method were faster than those of KT-CD ICs prepared by freeze-drying method.

• 한국수산과학회지
• /
• 제16권3호
• /
• pp.181-189
• /
• 1983

말쥐치육을 시료로하여, 건조중과 건어육 저장중의 갈변과 미생물조성의 변화를 검토한 결과를 요약하면 다음과 같다. $40^{\circ}C,\;50^{\circ}C$에서의 강제송풍식건조중에는 지방산화가 Maillard반응보다 갈기색소물질의 형성에 다소 깊이 관여하였다. 건조중의 지방산화는 감속건조기에서의 말쥐치 건조표면의 수분활성에 영향을 받아서, 공기의 상대습도가 $30\%$일 때 지방산화가 가장 늦었고, 상대습도가 $20\%,\;10\%$로 낮아지거나 $40\%,\;50\%$로 높아질수록 지방산화가 촉진되었다. 건제품을 $30^{\circ}C$에 저장하였을 때에도 갈변색소물질의 형성에는 지방산화가 Maillard 반응보다 다소 깊이 관여하였다. 수분활성 $0.12{\sim}0.76$의 범위에서 지방산화가 가장 늦었던 것은 수분활성 0.33부근이었다. $6\%$의 sucrose, $1.5\%$의 D-sorbitol을 첨가하였던 건어육을 $30^{\circ}C$에 저장하였을때 지방산화가 가장 늦은 수분활성은 0.33보다 다소 낮아졌으며, 평형수분함량의 증가에 따른 이동성(mobility)의 증대로 인한듯한 수용성갈변색소물질의 증가를 초래하였다. 건조직후의 말쥐치육의 미생물조성은 구균 $30\%$, 간균 $65\%$, 곰팡이와 효모가 $5\%$정도였다. 저장중에는 전체 미생물중 구균이 차지하는 비율이 증가하였고, 비포자 Gram 음성간균은 감소하였으며, 비포자 Gram 장성균과 포자형성균 및 곰팡이, 효모가 차지하는 비율은 거의 일정하였다.