• Journal of Environmental Science International
• /
• v.30 no.3
• /
• pp.245-255
• /
• 2021

In this study, we evaluated the effect of the type of sewage sludge (digested, non digested) on drying efficiency according to the polymer injection rate. The drying characteristics were shown using a near-infrared ray (NIR) and a microwave. As a result of the drying characteristics with NIR at a polymer dose ratio of 8%, the heating up period is up to 6 minutes after the start of the drying experiment. Afterwards, the constant rate drying period of the digested sludge (A, C and G sites) was 6 minute → 18 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge (B, D, E, F, H, I, J and K sites) showed gradual drying characteristics compared to digested sludge until complete drying (10%). As the polymer dose ratio of 10% and 12%, the heating up period for digested sludge is up to 6 minute after the start of the experiment. Afterwards, the constant rate drying period of the digested sludge was 6 minute → 20 minute, showing a rapid decrease in moisture. On the other hand, the heating up period of non digested sludge was up to 10 minute after the start of the experiment, and the constant rate drying period was 10 minute → 22 minute, which was shorter than digested sludge. As a result of the drying characteristics with microwave at a polymer dose ratio of 8%, 10% and 12%, the constant rate drying period the digested sludge was 4 minute → 20~22 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge of the constant rate drying period was 4 minute → 22~30 minute, which was longer than digested sludge.

• Journal of Mechanical Science and Technology
• /
• v.20 no.9
• /
• pp.1436-1448
• /
• 2006

This paper describes the effects of injection rate shaping on the combustion, fuel consumption and emission of $NO_x$ and soot of a medium duty diesel engine. The focus is on the influence of four different injection rate shapes, square type 1, square type 2, boot and ramp, with a variation of maximum injection pressure and start of injection (SOI). The experiments were carried out on a 1 liter single cylinder research diesel engine equipped with an amplifier-piston common rail injection system, allowing the adjustment of the injection pressure during the injection event and thus injection rate as desired. Two strategies to maintain the injected fuel mass constant were followed. One where rate shaping is applied at constant injection duration with different peak injection pressure and one strategy where rate shaping is applied at a constant peak injection pressure, but with variable injection duration. Injection rate shaping was found to have a large effect on the premixed and diffusion combustion, a significant influence on $NO_x$ emissions and depending on the followed strategy, moderate or no influence on soot emission. Only small effects on indicated fuel consumption were found.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.3
• /
• pp.131-136
• /
• 1989

This study was attempted to investigate the dissolution rate and the bioavailability after oral administration of commercially available aspirin tablets in normal volunteers. The dissolution test was conducted in artificial gastric juice using basket method with three aspirin preparations (A, B and C) which were chemically equivalent. The results were as follows; The dissolution rate was higher in the order of three different brand B>A >C. Area under the blood concentration and peak blood concentration were larger in the order of brand A>B>C. Absorption rate constant and peak time were larger in the order of brand B>A>C, and there was a little difference in elimination rate constant and biological half-life. The correlation of the dissolution rate and absorption rate constant, as well as correlation of the dissolution rate and peak time showed significant linear relationship respectively. From the results of this experiment, it can be concluded that the bioavailability of aspirin tablets showed much difference according to commercial preparations, and that the bioavailability of aspirin tablets in human may be predicted from the results of dissolution rate studies.

• Corrosion Science and Technology
• /
• v.20 no.3
• /
• pp.105-111
• /
• 2021

In oxidizing nitric acid solutions, stainless steel undergoes intergranular corrosion accompanied by grain dropping and changes in the corrosion rate. For the safe operation of reprocessing plants, this mechanism should be understood. In this study, we constructed a three-dimensional computational model using a cellular automata method to simulate the intergranular corrosion propagation of stainless steel. The computational model was constructed of three types of cells: grain (bulk), grain boundary (GB), and solution cells. Model simulations verified the relationship between surface roughness during corrosion and dispersion of the dissolution rate of the GB. The relationship was investigated by simulation applying a constant dissolution rate and a distributed dissolution rate of the GB cells. The distribution of the dissolution rate of the GB cells was derived from the intergranular corrosion depth obtained by corrosion tests. The constant dissolution rate of the GB was derived from the average dissolution rate. Surface roughness calculated by the distributed dissolution rates of the GBs of the model was greater than the constant dissolution rates of the GBs. The cross-sectional images obtained were comparable to the corrosion test results. These results indicate that the surface roughness during corrosion is associated with the distribution of the corrosion rate.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1081-1084
• /
• 2004

• Journal of Aerospace System Engineering
• /
• v.7 no.4
• /
• pp.1-11
• /
• 2013

In this study, probabilistic reliability analysis was conducted for hybrid rocket performance using Monte-Carlo Simulation. For the accuracy, reliability analysis was performed with experimental data. To simplify the analysis process, the oxidizer was supplied with constant pressure, so that pressure variation with time can be eliminated. And time-space averaged regression rate model was used. The regression rate is obtained with a series of experiments. For reliability analysis of thrust, constant exponent of regression rate is assumed that has probabilistic character. So, the efficiency of characteristic velocity has also probabilistic values. As a results, probability distribution of the thrust is obtained by Monte-Carlo simulation using random samples of the input parameter and validated under the 95% confidence level.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.7
• /
• pp.709-711
• /
• 2000

Oxidizing metal complex mediates the electrochemical oxidation of guanine nucleotides. This catalysis results in an enhancement in cyclic voltammograms that yield the rate constant for the oxidation of guanine by the metal complex via digital simulation. The rate constant of oxidation of guanine by Ru(bpy)3(3+) is 6.4 x 10(5)M(-1)s(-l). The rate constant and the enhanced current depend on the number of phosphate groups on the sugar of nucleotidc. Also the modified guanine bases show different oxidation rate constants following the trend guanine-5'- monophosphatc (GMP) > 8-bromo-guanine-5'-monophosphate (8-Br-GMP) > xanthosine -5'-monophosphate (XMP) > inosinc-5'-monophosphate (IMP). The guanine bases derivatized differently are all distinguishable from one another, providing a basis for studying electrochemistry of DNA and RNA and developing electrochemical biosensors.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.455-462
• /
• 2002

There exist several kinds of continuous consolidation tests to analyze the consolidation behavior of soft clay. The constant rate of strain (CRS) test has been adopted as a standard method by several countries, and some researches also have been peformed by domestic researchers. Among those, the constant pressure ratio (CPR) test is peformed with the constant ratio of excess porewater pressure to vertical effective stress. The test has the advantage of considerable reduction of duration time. In the study, the consolidation characteristics are analyzed by performing the CPR test as validate the pressure ratio with undisturbed soft clay and remolded clay, Also, results of the standard consolidation test and CRS test are compared to verify the CPR test can be employed for practical use. As a result, effects of variation of the pressure ratio on consolidation parameter are similar to the strain rate in the CRS test. Therefore, the test can be used to analyze the consolidation behavior of soft clay But the test have some problems such as expensive cost of equipment and highly skilled workmanship.

• Journal of Environmental Science International
• /
• v.13 no.1
• /
• pp.37-40
• /
• 2004

In this study, the decomposition of gas-phase TCE, Benzene and Toluene, in air streams by direct UV Photolysis and UV/TiO$_2$ process was studied. For direct UV Photolysis, by regressing with computer calculation to the experimental results the value of reaction rate constant k of TCE, Toluene and Benzene in this work were determined to be 0.00392s$\^$-l/, 0.00230s$\^$-1/ and 0.00126s$\^$-1/, respectively. And the adsorption constant K of TCE, Toluene and Benzene in this work were determined to be 0.0519 mol$\^$-l/ ,0.0313mo1$\^$-1/ and 0.0084mo1$\^$-1/, respectively. For UV/TiO$_2$ system by regressing with computer calculation to the experimental results the value of reaction rate constant k of TCE, Toluene, and Benzene in this work were determined to be 5.74g/$\ell$$.$min, 3.85g/$\ell$$.$min, and 1.18g/$\ell$$.$min, respectively. And the catalyst adsorption constant K of TCE, Toluene, and Benzene in this work were determined to be 0.0005㎥/mg, 0.0043㎥/mg and 0.0048㎥/mg, respectively.

• Elastomers and Composites
• /
• v.33 no.4
• /
• pp.274-280
• /
• 1998

Order of reaction, rate constant, activation energy for vulcanization reaction, crosslinking density, and elastic constant of the network produced by sulfur curing were investigated on the SBR/BR blends containing silica and carbon black under same cure system. The reaction order was shown to be first order regardless of filler types. The carbon black filled rubber compounds showed higher rate constant compared to silica filled compounds. But activation energy appeared to be same regardless of filler type and rubber blend ratio. The crosslinking density and elastic constant is higher in the carbon black filled compound compared to silica filled compounds because of strong interaction between rubber and carbon black. On the other hand, crosslinking density and elastic constant were decreased with increasing the butadine rubber content in rubber blends. From the comparison of combined sulfur content in the vulcanized rubber, sulfur content in the silica filled compound become constant 20min later after reaction initiates but sulfur content in the carbon black filled compound become constant 10min later after reaction starts. The silica compound has a longer induction time ($t_2$) and optimum cure time($t_{90}$) compared to those of the carbon black filled compound.