• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1118-1122
• /
• 2006

In this study, in order to develop the low temperature sintering multilayer piezoelectric actuator, PMN-PNN-PZT system ceramics were manufactured and their microstructure, ferroelectric and piezoelectric properties were investigated. By increasing sintering temperature, remanent polarization$(P_r)$ was increased due to the increase of sinterability and grain size. However, coercive $field(E_c)$ showed an opposite tendency to remanent polarization owing to the feasibility of domain wall motion. At the sintering temperature of $900^{\circ}C$, dielectric $constant({\varepsilon}_r)$, electromechanical coupling $factor(k_p)$, piezoelectric $constant(d_{33})$ and mechanical quality $factor(Q_m)$ showed the optimal value of 1095, 0.60, 363 and 1055, respectively, for multilayer piezoelectric actuator application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.11-14
• /
• 1993

$BaO-TiO_2$ ceramics ($BaO:TiO_2$=18.2:81.8[mol.%]) were fabricated by mixed-oxide method. Microwave dielectric properties were investigated with sintering temperature and annealing time. Increasing the sintering temperature, the sintered density was decreased. At the sintering temperature of 1400$[^{\circ}C]$, dielectric constant, quality factor and temperature coefficient of resonant frequency had a good values of 35.03, 5690, -4.433$[ppm/^{\circ}C]$, respectively. Increasing the annealing time, dielectric constant and quality factor were increased and temperature coefficient of resonant frequency was decreased.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.139-143
• /
• 2004

This paper presents a method that the engine oil condition is detected using a natural convection heat transfer in a engine oil. A sensor circuit maintains a constant temperature difference between a heat plate and engine oil for detecting a natural convection heat transfer rate on the constant temperature. The natural convection heat transfer rate is measured by a current through the heat plate of the sensor circuit. The sensor is tested by a fresh oil. 6,000 km and 10,000 km driven oil in the oil temperature range from $20^{\circ}C$ to $100^{\circ}C$. In the experimental result, when the current through the heat plate is altered by variation of a engine oil temperature and flows driven oil more than fresh oil, the sensor could inform a engine oil deterioration to a car driver.

• Journal of the Korean Ceramic Society
• /
• v.32 no.10
• /
• pp.1111-1116
• /
• 1995

To use dielectric material of high power multilayer capacitor, the composition of the commercial CaTiO3 was changed to decrease the sintering temperature, and the physical and electrical properties were investigated. Series of experiments showed that CaTiO3 with sintering additives had the highest density, the highest shrinkage, the lowest dielectric constant, the lowest loss factor, and the lowest temperature coefficient of capacitance (TCC). These properties had the constant values at sintering temperature of above 120$0^{\circ}C$.

• Journal of the Korean Society of Safety
• /
• v.6 no.4
• /
• pp.34-44
• /
• 1991

In this study, the general solution of heat balance equation including conductive heat loss were suggested and were determined the constants with the results of experiment in hot tunnel in order to derive the general equation for the response time and to investigate the response time index which represent the characteristics of response of sprinkler head in actual fires. Two types of test were considered, the plunge test, in which the air temperature is represented by a step function, and the ramp test, in which the air temperature increases at a constant rate. As a result, simple equations were derived, which can be predicted the response time for the ramp type fire with the rate of temperature rise and gas velocity, for the plunge type fire with temperature and gas velocity. Also other useful data, such as the effective temperature, time constant, response time index and conduction parameter were obtained.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.117-124
• /
• 1997

In this study, mechanical properties of type V cement concrete with different curing temperature were investigated. The tests for mechancial properties, i.e., compressive strength and modulus of elasticity, were carried out on two kinds of type V cement concrete mixes. concrete cylinders cured at 10, 23, 35 and 50℃ were tested at 1, 3, 7 and 8 days. The 'rate constant model' was used to described the combined effects of time and temperature on compressive strength development. Test results show that concrete subjected to high temperature at early age attains greater strength than concrete to low temperature but eventually attains lower later-age strength than that. With type V cement concrete, the linear and Arrhenius rate constant models both accurately describe the development of relative strength as afunction of the equivalent age.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.283-285
• /
• 1987

Transient conduction current (I - t characteristics) were measured in thin PPMMA (plasma-polymerized methyl methacrylate) films over the temperature range $60^{\circ}C-140^{\circ}C$ and the applied voltage range 3V - 30V. The current, which increased with temperature rise at constant applied voltage, showed less absorption current (current decay with time) at higher temperature region compared with those at lower temperature region. And the current, which increased with applied voltage rise at the constant temperature, showed less absorption current at higher voltage compared with those at lower voltage. The electric field current density characteristic curves were abtained from the conduction current values were after applying voltage for 30 minutes. And transient conduction currents were analyzed with high field conduction theories.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.442-446
• /
• 1994

In this study, microwave dielectric properties of 0.182BaO-0.818TiOS12T ceramics were investigated with sintering temperature and annealing time, and the application for the microwave dielectric resonator was studied. In the specimen simtered at 1400[$^{\circ}C$], dielectric constant, unloaded Q and temperature coefficient of resonant frequency had good values of 35.36, 5692, -4.43[ppm/$^{\circ}C$], respectively. The specimen which temperature coefficient of resonant frequency($\tau$f) was vared positive to negative value was selected, thereafter microwave dielctric properties was investigated with annealing time(0~4[hr]) in the fixed annealing temperature of 1350[$^{\circ}C$]. Increasing the annealing time, dielectric constant and unloaded Q were increased and temperature coefficient of resonant frequency was decreased.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.7-9
• /
• 2006

$(BaSr)TiO_3$ thick films were prepared by tape casting method using $BaTiO_3$ and $SrTiO_3$ powder slurry in order to investigate dielectric properties and low temperature sintering. Sintering density was $5.7\;g/cm^3$ and the BST sample exhibited the maximum dielectric constant, tunability at temperatures near phase transition point. The dielectric constant was increased and curie temperature was shifted to higher temperature with increasing of annealing temperature.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.864-870
• /
• 1998

The effect of {{{{ {{Nb }_{2 }O }_{5 } }} and CoO addition on the temperature dependence of the {{{{ {BaTiO }_{3 } }}-based ceramic capa-citor has been studied. X7R with moderate temperature dependence has been developed by means of pre-cisely controlled {{{{ {{Nb }_{2 }O }_{5 } }}/CoO ratio. Dielectric constant(K) and dissipation factor(DF) were 3500 and 1.5% respectively. As the content of {{{{ {{Nb }_{2 }O }_{5 } }} was increased the curie temperature(Tc) was shifted to lower tem-perature and the dielectric constant at Tc was decreased. The proper addition of CoO with {{{{ {{Nb }_{2 }O }_{5 } }} improved the temperature dependence of dielectric properties of the {{{{ {BaTiO }_{3 } }}-based ceramic capacitor.