• 한국전자파학회논문지
• /
• 제20권5호
• /
• pp.480-492
• /
• 2009

본 논문에서는 UHF 대역에서 동작하는 광대역에서 일정한 준 등방성 특성을 가지는 U-형태의 RFID 태그 안테나를 제안하였다. 제안한 태그 안테나는 복사부에 해당하는 U-형태의 반파장 다이폴 안테나 본체에 상용 태그 칩과의 공액 정합이 용이하도록 사각형태의 급전부를 연결하였다. 또한, 본체 하단 중앙에 직사각형 슬릿을 삽입하여 동작 대역폭 안에서 태그 안테나가 일정한 준 등방성 특성을 가지도록 하였다. 태그 안테나는 VSWR<2를 기준으로 슬릿이 없을 경우 $860.5{\sim}954.5\;MHz$의 대역폭과 슬릿이 있을 경우 $864.5{\sim}954\;MHz$의 대역폭을 가졌다. VSWR<5.8을 기준으로 슬릿이 없을 경우와 슬릿이 있을 경우 각각 $835.5{\sim}979.5\;MHz$의 대역폭과 $837{\sim}981.5\;MHz$의 대역폭을 얻었다. 정합 주파수 대역 안에서 슬릿이 없는 태그 안테나의 치대 이득편차와 최소 이득편차는 각각 3.86 dB와 3.33 dB로 약 0.53 dB 차이를 가졌고, 슬릿이 있을 경우에는 최대 이득편차와 최소 이득편차가 각각 3.60 dB와 3.54 dB로 약 0.06 dB 차이의 매우 일정한 이득편차 특성을 가졌다.

• 천문학회지
• /
• 제37권4호
• /
• pp.185-191
• /
• 2004

We have been developing a solar observing system based on a fast CCD camera 1M30P made by the DALSA company. Here we examine and present the characteristics and performance of the camera. For this we have analyzed a number of images of a flat wall illuminated by a constant light source. As a result we found that in the default operating mode 1) the mean bias level is 49 ADU/pix, 2) the mean dark current is about 8 ADU /s/pix, 3) the readout noise is 1.3 ADU, and 4) the gain is about 42 electrons/ ADU. The CCD detector is found to have a linearity with a deviation smaller than $6\%$, and a uniform sensitivity better than $1\%$. These parameters will be used as basic inputs in the analysis of data to be taken by the camera.

• 한국정보전자통신기술학회논문지
• /
• 제2권2호
• /
• pp.57-62
• /
• 2009

본 논문에서는 금속체에 태그를 부착하였을 경우에도 태그 안테나가 전방향성 방사패턴을 갖고 동작하는 PIFA 형 RFID 금속 태그 안테나를 제안하였다. 안테나는 본체와 급전부, 수직 패치와 접지면으로 되어 있으며, 안테나를 소형화시키기 위해 본체와 접지면 사이에 높은 유전율을 가지는 기판을 삽입하였다. 본체는 급전부를 중심으로 대칭적인 구조를 가져 안테나에 흐르는 전류를 반대 방향으로 흐르도록 하였다. 시뮬레이션 결과 제안된 안테나의 임피던스 대역폭 ($S_{11}$ < -10 dB)은 20 MHz (900 ~ 920 MHz)를 나타내었고, 최대 복사 이득은 중심 주파수 912 MHz에서 공기 중과 금속 물체에 부착하였을 때 각각 -10 dBi와 -15 dBi를 가졌다. 또한 이득 편차가 각각 6 dB 이하를 만족시켜 제안된 안테나가 전방향성 복사 패턴을 가지고 동작하는 것을 알 수 있다.

• 한국항공운항학회지
• /
• 제15권4호
• /
• pp.9-16
• /
• 2007

Tilt rotor aircraft can take off and land vertically and cruise faster than any other helicopter. A scaled flight demonstration model of a tilt rotor aircraft has been developed by KARI. Because the flight characteristics of tilt rotor are not well known, the developed scaled model would be helpful to evaluate flight control algorithm of a full scale aircraft. The tethered hover test has been performed in order to improve hover flight characteristics of tilt rotor aircraft prior to flight test of the small scaled model. During the tethered hover test, the performance of rotor speed governor, rate SAS (Stability Augmentation System) and control surface mixers have been evaluated. We expect that the results of real flight hover test would be quite same as tethered hover test. Therefore the tethered hover test results will reduce the risk of flight test properly by fixing some of hidden problems which might occur during the flight test. This paper presents the results of tethered hover test in detail and shows how it could be final ground test before flight test. The control mixer gain and rate SAS feedback gains were modified in order to get higher controllability and stability during the tethered hover flight. The rotor governor showed that it could keep rotor RPM constant with very small deviation even during severe pilot collective input change. The tethered hover test results gave pilot and engineers confirmation and experience about the scheduled flight test.

• Animal Bioscience
• /
• 제37권5호
• /
• pp.817-825
• /
• 2024

Objective: The aim of this study was to identify suitable polynomial regression for modeling the average growth trajectory and to estimate the relative development of the rib eye area, scrotal circumference, and morphometric measurements of Guzerat young bulls. Methods: A total of 45 recently weaned males, aged 325.8±28.0 days and weighing 219.9±38.05 kg, were evaluated. The animals were kept on Brachiaria brizantha pastures, received multiple supplementations, and were managed under uniform conditions for 294 days, with evaluations conducted every 56 days. The average growth trajectory was adjusted using ordinary polynomials, Legendre polynomials, and quadratic B-splines. The coefficient of determination, mean absolute deviation, mean square error, the value of the restricted likelihood function, Akaike information criteria, and consistent Akaike information criteria were applied to assess the quality of the fits. For the study of allometric growth, the power model was applied. Results: Ordinary polynomial and Legendre polynomial models of the fifth order provided the best fits. B-splines yielded the best fits in comparing models with the same number of parameters. Based on the restricted likelihood function, Akaike's information criterion, and consistent Akaike's information criterion, the B-splines model with six intervals described the growth trajectory of evaluated animals more smoothly and consistently. In the study of allometric growth, the evaluated traits exhibited negative heterogeneity (b<1) relative to the animals' weight (p<0.01), indicating the precocity of Guzerat cattle for weight gain on pasture. Conclusion: Complementary studies of growth trajectory and allometry can help identify when an animal's weight changes and thus assist in decision-making regarding management practices, nutritional requirements, and genetic selection strategies to optimize growth and animal performance.