• Journal of Biosystems Engineering
• /
• v.24 no.6
• /
• pp.493-500
• /
• 1999

In 1990's, two types of land consolidation has been widely carried out to enforce competativeness of rice production in Korea. One is so called large-scale land consolidation for resizing paddy field and farm road, the other is general land consolidation for changing both size and shape of field, water channel and farm road. This study was conducted to evaluate how much effect on fm mechanization the land consolidation had. To evaluate the influence of the land consolidation, theoretical analysis and surveys were accomplished. Land consolidation was analyzed to increase field efficiency by 180 to 670% depending on the type of land consolidation and machine selection. Also, land consolidation brought increment of real working time ratio by reducing traveling time on farm road. Trends of large scale mechanization and increment of custom work were observed to be accelerated by land consolidation. It also gave effect on the pattern of machine troubles. Farmers were conscious of the influence of land consolidation on machine utilization, however, in plains level of satisfaction was shown to be low.

• Korean Management Science Review
• /
• v.29 no.3
• /
• pp.23-43
• /
• 2012

Enacted for enhancing the competitiveness of the Korean capital market and financial industry, Capital Market Consolidation Act (CMCA) was intended to induce considerable changes such as adopting the concept of financial investment products, regulating financial investment functionally, extending financial investors' business areas and intensifying protection for investors. Employing DEA (Data Envelopment Analysis), this study measures and compares the efficiencies of domestic financial companies between the before and after the enactment of the Consolidation Act. We categorize the financial companies into 4 groups (banks, life insurance companies, property and casualty insurance companies and securities companies) depending on their business types, and evaluate how much and in which direction the Consolidation Act affects the efficiency of each group respectively. The study shows that there is no significant difference between the average efficiency of banks and that of property and casualty insurance companies due to the trade-off between opportunities and threats of the Act. To the contrary, it shows that the respective average efficiencies of life insurance companies and securities companies moved in the opposite directions to a considerable extent. Through empirical tests, we demonstrate the effect of the Act on the efficiency of Korean financial companies, and suggest the countermeasures for each financial group against the Act.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.4
• /
• pp.13-22
• /
• 2013

To simulate the soft ground improved by vertical drain method and to investigate the effect of overlapping smear on subsequent consolidation behavior, a series of consolidation tests with a large consolidation chamber and mandrel insertion device were conducted. Based on the test result, numerical analysis was also performed to analyze the efficiency of the vertical drain method. Laboratory test and numerical analysis results showed that the effect of smear zone increased consolidation settlement but the overlapping smear zone decreased the consolidation settlement. In addition, vertical drain accelerated consolidation rate but narrowing the drain spacing did not affect the consolidation rate because of the effect of smear. The efficiency of consolidation rather decreased substantially when the smear zone was overlapped.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.10
• /
• pp.41-48
• /
• 2005

The gravitational consolidation behavior of the dredged ground with horizontal drains is analyzed using a finite difference program developed for self-weight consolidation analysis with horizontal drains. The influence of area and direction of horizontal drains on the consolidation time and settlement is analyzed. Various field conditions such as the non-treated ground below horizontal drain installed ground, the accumulation of drained water at the end of horizontal drains, are also included in the analyses. It was found that a slight decrease of consolidation time is resulted in the twice increase of the sectional area of drains. Installing drains vertically can reduce the consolidation time more significantly than installing drains horizontally. The analyses showed quantitatively that the non-treated ground below the horizontal drain installed ground has much influence on long term consolidation settlement, and the accumulation of hydraulic head at the end of horizontal drains results in the increase of consolidation time and insufficient consolidation.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.4
• /
• pp.77-87
• /
• 2011

To investigate the effect of drainage spacing and smear on the rate of consolidation and the efficiency of vertical drain method, a series of consolidation tests with a large consolidation chamber and special equipment for inserting mandrels were conducted. As the smeared region increases, total settlement in over-consolidated clay increases whereas apparent change in settlement does not appear in normally consolidated clay. Vertical drain generally accelerates the rate of consolidation, while it could also deteriorate the efficiency of vertical drain method even for the decreasing drainage length and spacing ratio.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09b
• /
• pp.141-146
• /
• 2010

To investigate the effect of drainage spacing and smear on the rate of consolidation, a large consolidation chamber and mandrel insertion device were developed. After the occurrence of smear by installation of sand drain, model ground was consolidated in either overconsolidated or normally consolidated state. As smear effect increases and thus drain spacing decreases, total settlement increase in overconsolidated state but has no effect in normally consolidated state. Efficiency of vertical drain decreases and consequently consolidation time increases in all tests as smear effect becomes significant.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.43-50
• /
• 2000

In this paper, the consolidation efficiency and the equivalent diameter of the cross shaped drain are examined by using the laboratory test and the numerical model, and the results are compared with those of the band shaped drain. The equivalent diameter of the tested drains is back-calculated from the laboratory experiment and compared with those calculated from the formula suggested in the literature. The efficiency of the cross shaped drain is evaluated by using the 3-D flow program which was validated by the settlement-time test fill data. The results of laboratory test show that the equivalent diameter of the band shaped drain was close to the Rixner's formula and that of the cross shaped drain was fit to the following formula: $d_w\;=\; \\tarc{3}{4}.(b+t)$The results of the numerical analysis show that the cross shaped drain can reduce the consolidation time by 9-10% from that for the band shaped drain. The equivalent diameter obtained from the numerical flow model by using the field data is 3.5 times smaller than that obtained from the laboratory consolidation test.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3002-3010
• /
• 2000

ATM forum defined several ATM oriented services such as ABR, VBR, CBR, UBR, and others. Among them, ABR service is considered as one of the most appropriate ones in the LAN environment. ABR controls network traffic by using RM cells according to ATM forum standard. In particular, the point-to-multipoint ABR service in general uses consolidation algorithms to solve feedback implosion at the branch point. Consolidation algorithms alleviate propagation delay and network congestion problem: thus, the efficiency of consolidation algorithm is closely related to the network performance. In this paper, we describe the limitation of existing consolidation algorithms based on thorough analysis, and then propose an algorithm that performs better than the existing algorithms. We show that the proposed algorithm improves network performance through a parametric simulation, In our simulation the performance measure is the cell rate which is controlled by exploiting the congestion depth. We also found that the proposed algorithm not only improves efficiency of network, but also eliminates the consolidation noise.

• Geomechanics and Engineering
• /
• v.10 no.3
• /
• pp.335-355
• /
• 2016

Most laboratory test research has focused on grouting efficiency in homogeneous reconstituted soft clay. However, the natural sedimentary soils generally behave differently from reconstituted soils due to the effect of soil structure. A series of laboratory grouting tests were conducted to research the effect of soil structure on the performance of compensation grouting. The effects of grouting volume, overlying load and grouting location on the performance of compensation grouting under different soil structures were also studied. Reconstituted soil was altered with added cement to simulate artificial structured soil. The results showed that the final grouting efficiency was positive and significantly increased with the increase of stress ratio within a certain range when grouting in normally consolidated structured clay. However, in the same low yield stress situation, the artificial structured soil had a lower final grouting efficiency than the overconsolidated reconstituted soil. The larger of normalized grouting volume could increase the final grouting efficiency for both reconstituted and artificial structured soils. Whereas, the effect of the overlying load on final grouting efficiencies was unfavourable, and was independent of the stress ratio. As for the layered soil specimens, grouting in the artificial structured soil layer was the most efficient. In addition, the peak grouting pressure was affected by the stress ratio and the overlying load, and it could be predicted with an empirical equation when the overlying load was less than the yield stress. The end time of primary consolidation and the proportion of secondary consolidation settlement varied with the different soil structures, grouting volumes, overlying loads and grouting locations.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.287-297
• /
• 2014

For several decades, many countries operating nuclear power plants have been studying the various disposal alternatives to dispose of the spent nuclear fuel or high-level radioactive waste safely. In this paper, as a direct disposal of spent nuclear fuels for deep geological disposal concept, the rod consolidation from spent fuel assembly for the disposal efficiency was considered and analyzed. To do this, a concept of spent fuel rod consolidation was described and the related concepts of disposal canister and disposal system were reviewed. With these concepts, several thermal analyses were carried out to determine whether the most important requirement of the temperature limit for a buffer material was satisfiedin designing an engineered barrier of a deep geological disposal system. Based on the results of thermal analyses, the deposition hole distance, disposal tunnel spacing and heat release area of a disposal canister were reviewed. And the unit disposal areas for each case were calculated and the disposal efficiencies were evaluated. This evaluation showed that the rod consolidation of spent nuclear fuel had no advantages in terms of disposal efficiency. In addition, the cooling time of spent nuclear fuels from nuclear power plant were reviewed. It showed that the disposal efficiency for the consolidated spent fuel rods could be improved in the case that cooling time was 70 years or more. But, the integrity of fuels and other conditions due to the longer term storage before disposal should be analyzed.