• 제목/요약/키워드: Consistency for classification

검색결과 132건 처리시간 0.029초

방조제 축조 예정지반의 지진에 의한 액상화 거동 평가 (A Study on the Evaluation of Dynamic Behavior and Liquefaction Cau8ed by Earthquake of Sea Dike Structures on the Ground)

  • 도덕현;장병욱;고재만
    • 한국농공학회지
    • /
    • 제35권2호
    • /
    • pp.43-56
    • /
    • 1993
  • The laboratory tests are performed on how the liquefaction potential of the sea dike structures on the saturated sand or silty sand seabed could be affected due to earthquake before and after construction results are given as follows ; 1. Earthquake damages to sea dike structures consist of lateral deformation, settlement, minor abnormality of the structures and differential settlement of embankments, etc. It is known that severe disasters due to this type of damages are not much documented. Because of its high relative cost of the preventive measures against this type of damages, the designing engineer has much freedom for the play of judgement and ingenuity in the selection of the construction methods, that is, by comparing the cost of the preventive design cost at a design stage to reconstruction cost after minor failure. 2. The factors controlling the liquefaction potential of the hydraulic fill structure are magnitude of earthquake(max. surface velocity), N-value(relative density), gradation, consistency(plastic limit), classification of soil(G & vs), ground water level, compaction method, volumetric shear stress and strain, effective confining stress, and primary consolidation. 3. The probability of liquefaction can be evaluated by the simple method based on SPT and CPT test results or the precise method based on laboratory test results. For sandy or silty sand seabed of the concerned area of this study, it is said that evaluation of liquefaction potential can be done by the one-dimensional analysis using some geotechnical parameters of soil such as Ip, Υt' gradation, N-value, OCR and classification of soils. 4. Based on above mentioned analysis, safety factor of liquefaction potential on the sea bed at the given site is Fs =0.84 when M = 5.23 or amax= 0.12g. With sea dike structures H = 42.5m and 35.5m on the same site Fs= 3.M~2.08 and Fs = 1.74~1.31 are obtained, respectively. local liquefaction can be expected at the toe of the sea dike constructed with hydraulic fill because of lack of constrained effective stress of the area.

  • PDF

사상체질분류검사지(四象體質分類檢査紙)(QSCC)II의 표준화(標準化) 연구(硏究) - 각 체질집단의 군집별(群集別) Profile 분석을 중심으로 - (A Study on the Standardization of QSCC II (Questionnaire for the Sasang Constitution Classification II))

  • 김선호;고병희;송일병
    • 대한한의학회지
    • /
    • 제17권2호
    • /
    • pp.337-393
    • /
    • 1996
  • 본 연구의 목적은 통계적 문항 분석을 통하여 새로 개발된 사상체질분류검사지(QSCC)II의 네가지 척도를 각 계층별로 표준화하여 그 진단 정확율을 알아 봄으로써 객관적인 사상 체질 분류의 검사 방법을 만드는데 있다. 사상체질분류검사지(QSCC)II는 전국에서 각 계층별(연령, 성별, 생활 수준별)로 고르게 수집된 136명의 피검자의 답안을 표준화 자료로 삼았다. 진단 정확율을 알아보기 위한 준거 집단으로는 경희대학교 한방병원 사상의학과 외래 환자 및 동서건진센타 내원객 265명을 대상으로 하였다. 수집된 자료는 SPSS PC + v. 4.0 Program으로 내적 일치도, 변량 분석(ANOVA), 사후검정(Duncan test) 및 판별분석을 하여 통계처리하였다. 위와 같은 연구의 결과는 다음과 같다. 1. 각 체질 별 척도의 내적 일치도는 0.5708 - 0.6319로서 설문지 구성에 체격과 체형을 포함한 다양한 요인이 추가되어 있음을 알 수 있다. 2. 검사지의 각 척도는 변양분석 결과 체질별로 유의한 차이가 있으므로 검사지의 문항은 진단변별력이 인정되는 문항들로 구성되어 있음을 확인하였다. 3. 검사지의 응답방향에 영향을 미치는 여러 가지 변인 가운데 연령 성별 그리고 문항수 등이 통계적으로 유의한 차이가 있는 것으로 나타났다. 4. 본 연구에서는 이상의 변인을 고려한 규준(Norms)을 표준화 자료로 제시 하므로써 검사지에 의한 체질진단의 객관적 지표를 마련하였다. 5. 검사지는 연령과 성별에 관계없이 고르게 적용시킬 수 있다. 6. 검사지에서 새로 구성된 척도들로 판별분석을 한 결과 평균 판별정확율은 70.08%였다. 이 결과는 QSCC의 타당화 연구에서 보인 평균 판별정확율 55.56%에 비하면 비교적 높은 분류정확율을 보이는 것이라고 사료된다. 7. 검사지의 네 가지 척도들은 이전의 검사지에 비하여 고르게 체질진단에 기여함을 알 수 있었다. 8. 검사지는 분석결과 이전의 검사지들 보다 사상체질 진단에서 정확율 향상, 차별화된 계층별 체질 진단 방법의 제시에 의한 객관성 확보 등의 문제점을 개선 할 수 있었다. 이상의 결과로 보아 새로 개발되어 표준화된 QSCCII는 다소의 제한은 있으나 임상 상담 및 실험연구에서 체질 진단을 할 때 객관적인 체질진단 도구로서 이용 가치가 인정되며 사상체질분류의 객관적 기준으로서도 그 가치가 인정된다.

  • PDF

사상체질분류검사지(四象體質分類檢査紙)(QSCC)II의 표준화(標準化) 연구(硏究) -각(各) 체질집단(體質集團)의 군집별(群集別) Profile 분석(分析)을 중심(中心)으로- (A Study on the Standardization of QSCCII (Questionnaire for the Sasang Constitution Classification II))

  • 김선호;고병희;송일병
    • 사상체질의학회지
    • /
    • 제8권1호
    • /
    • pp.187-246
    • /
    • 1996
  • 본 연구의 목적은 통계적 문항 분석을 통하여 새로 개발된 사상체질분류검사지(QSCC)II의 네가지 척도를 각 계층별로 표준화하여 그 진단 정확율을 알아 봄으로써 객관적인 사상 체질 분류의 검사 방법을 만드는데 있다. 사상체질분류검사지(QSCC)II는 전국에서 각 계층별(연령, 성별, 생활 수준별)로 고르게 수집된 1366명의 피검자의 답안을 표준화 자료로 삼았다. 진단 정확율을 알아보기 위한 준거 집단으로는 경희대학교 한방병원 사상의학과 외래 환자 및 동서건진센타 내원객 265명을 대상으로 하였다. 수집된 자료는 SPSS PC+ V. 4.0 Program으로 내적 일치도, 변량 분석(ANOVA), 사후검정(Duncan test) 및 판별분석을 하여 통계처리하였다. 위와 같은 연구의 결과는 다음과 같다. 1) 각 체질별 척도의 내적 일치도는 0.5708 ~ 0.6319로서 설문지 구성에 체격과 체형을 포함한 다양한 요인이 추가되어 있음을 알 수 있다. 2) 검사지의 각 척도는 변양분석 결과 체질별로 유의한 차이가 있으므로 검사지의 문항은 진단변별력이 인정되는 문항들로 구성되어 있음을 확인하였다. 3) 검사지의 응답방향에 영향을 미치는 여러 가지 변인 가운데 연령 성별 그리고 문항수 등이 통계적으로 유의한 차이가 있는 것으로 나타났다. 4) 본 연구에서는 이상의 변인을 고려한 규준(Norms)을 표준화 자료로 제시함으로써 검사지에 의한 체질진단의 객관적 지표를 마련하였다. 5) 검사지는 연령과 성별에 관계없이 고르게 적용시킬 수 있다. 6) 검사지에서 새로 구성된 척도들로 판별분석을 한 결과 평균 판별정확율은 70.08%였다. 이 결과는 QSCC의 타당화 연구에서 보인 평균 판별정확율 55.56%애 비하면 비교적 높은 분류정확율을 보이는 것이라고 사료된다. 7) 검사지의 네 가지 척도들은 이전의 검사지에 비하여 고르게 체질진단에 기여함을 알 수 있었다. 8) 검사지는 분석결과 이전의 검사지들 보다 사상체질 진단에서 정확율 향상, 차별화된 계층별 체질 진단 방법의 제시에 의한 객관성 확보 등의 문제점을 개선 할 수 있었다. 이상의 결과로 보아 새로 개발되어 표준화된 QSCCII는 다소의 제한은 있으나 임상 상담 및 실험연구에서 체질 진단을 할 때 객관적인 체질진단 도구로서 이용 가치가 인정되며 사상체질분류의 객관기준으로서도 그 가치가 인정된다.

  • PDF

Multinomial Group Testing with Small-Sized Pools and Application to California HIV Data: Bayesian and Bootstrap Approaches

  • 김종민;허태영;안형진
    • 한국조사연구학회:학술대회논문집
    • /
    • 한국조사연구학회 2006년도 춘계학술대회 발표논문집
    • /
    • pp.131-159
    • /
    • 2006
  • This paper consider multinomial group testing which is concerned with classification each of N given units into one of k disjoint categories. In this paper, we propose exact Bayesian, approximate Bayesian, bootstrap methods for estimating individual category proportions using the multinomial group testing model proposed by Bar-Lev et al (2005). By the comparison of Mcan Squre Error (MSE), it is shown that the exact Bayesian method has a bettor efficiency and consistency than maximum likelihood method. We suggest an approximate Bayesian approach using Markov Chain Monte Carlo (MCMC) for posterior computation. We derive exact credible intervals based on the exact Bayesian estimators and present confidence intervals using the bootstrap and MCMC. These intervals arc shown to often have better coverage properties and similar mean lengths to maximum likelihood method already available. Furthermore the proposed models are illustrated using data from a HIV blooding test study throughout California, 2000.

  • PDF

공무원 순환보직에 관한 연구 (A Study on Job Rotation in Civil Service)

  • 김광호
    • KDI Journal of Economic Policy
    • /
    • 제30권2호
    • /
    • pp.61-97
    • /
    • 2008
  • 본 연구는 공무원의 전문성 축적을 저해하는 것으로 지속적으로 지적되는 순환보직의 실태를 파악하고 그 개선방안을 제시하는 것을 목적으로 한다. 우리나라 중앙부처 과장급 이상 공무원의 평균재직기간은 1년 남짓으로 매우 짧아 업무의 인수 인계에서 오는 비효율 및 업무공백, 전문성 축적기회의 감소, 책임성 저하, 정책의 일관성 및 연속성 결여 등 여러 문제를 낳으며, 특히 고도의 전문성을 요하는 대외 협상 분야에서 큰 국가적 손실을 낳는 것으로 파악된다. 이의 개선을 위해서는 전문성을 고려하는 보직이동, 전보범위의 축소, 전보제한기간의 강화 등의 조치가 필요하나, 근본적으로 현재와 같은 과도한 순환보직이 연공서열에 기초한 계급제에 기인하므로 장기적으로 공직분류제도를 계급제에서 직위분류제로 전환하고 실적주의적 요소를 강화해야 할 것이다.

  • PDF

GMFM-88과 GMFM-66의 신뢰도와 타당도 비교 (Comparison of Reliability and Validity Between GMFM-88 and GMFM-66 in Children With Cerebral Palsy)

  • 박은영;박소연
    • 한국전문물리치료학회지
    • /
    • 제17권3호
    • /
    • pp.40-47
    • /
    • 2010
  • The purposes of this study were to compare the reliability and validity of an 88-item version of the Gross Motor Function Measure (GMFM-88) and a 66-item version of GMFM (GMFM-66) in children with cerebral palsy (CP). The GMFM was completed in 154 children with CP (age range = 6~12). The internal consistency of the GMFM was calculated by Cronbach's ${\alpha}$ for judging reliability. The reliability of GMFM-88 and GMFM-66 were both above .99. The validity of measurement obtained by the GMFM was assessed by examining the unidimensionality of items and by comparing Gross Motor Function Classification System (GMFCS) levels with tests of the GMFM. Both the GMFM-88 and GMFM-66 were satisfied with unidimensionality. Discriminant validity was demonstrated on significant decreases in scores with increasing GMFCS levels in both measurements. However, GMFM-66 was a more sensitive discriminant in GMFCS level 1 and level 2 and in level 2 and level 4. This study reported a comparison of the reliability and validity of GMFM-88 and GMFM-66. The results of this study have implications for the information on the psychometric properties of two versions of GMFCS. This information will be useful for the selection of tools in clinics.

MIL-HDBK-344A 기반의 ESS 요구사항 표준안 연구 (A Study on the Standard of ESS Requirement based on MIL-HDBK-344A)

  • 김병준;김진성
    • 한국전자통신학회논문지
    • /
    • 제15권2호
    • /
    • pp.335-342
    • /
    • 2020
  • ESS(초기고장배제)는 제품생산 간 유입되는 '잠재결함'을 제거하기 위한 중요한 생산 프로세스로서 최근에는 방위사업 분야에서도 제품에 대한 필수 품질요구조건으로서 QAR(품질보증요구서)에 포함되고 있으나, 무기체계의 분류 및 작성자에 따라 내용 및 작성양식이 상이하거나, 중요한 요소가 누락되는 사례가 빈번하게 식별되고 있다. 따라서 본 논문에서는 MIL-HDBK-344A 기반의 정량적인 ESS 요구사항 표준안을 제시하여 QAR의 일관성 및 완전성을 보장하고, 잠재결함 제거 효과 파악을 위한 지표인 결함유도효율(PE) 산출 시 용이성을 확보하고자 한다.

복합건축의 수직동선 이용자별 효율적인 제3동선의 설정 (The Effective Third Circulation Plan Based on Elevator and Escalator Users Surveys in Mixed-Use Buildings)

  • 이진경;김찬주
    • 대한건축학회논문집:계획계
    • /
    • 제35권2호
    • /
    • pp.3-10
    • /
    • 2019
  • The purpose of the study is to survey the effective methodology of composition and connection for the third pedestrian routes in mixed-use building by case studies. The study is performed as follows: First of all, pedestrian routes are classified into malling route, evacuation route, and the Third route. Secondly, case studies are conducted based on the classification. Thirdly, it is investigated about the composition and connection of the malling and the Third pedestrian route. The investigation is focused on gate, path, central area, vertical circulation(EV and escalator) and the four circulation elements. Finally, the effective methodology is extracted for setting the Third route in mixed-use buildings. The conclusion of the study is as follows: The enhancement of consistency and connection between the main route and the Third route is important for providing convenient paths especially to users who needs shortcut, EV/ES users. Additionally, the connections between EV and gate, between shortcut and EV/ES should be increased to enable users choosing their path as needed.

악하부종괴에 대한 임상적 연구 (CLINICAL STUDY ON SUBMANDIBULAR MASSES)

  • 장현석;유준영
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제18권4호
    • /
    • pp.701-705
    • /
    • 1996
  • There are many kind of diagnostic entities in submandibular or neck masses, and we can set up treatment plan and estimate treatment result, prognosis by accurate diagnosis. By reasoning medical and dental history, physical examination, anatomical consideration of masses in submandibular or neck area, location of masses, laboratory and radiographic studies, we can formulate a clinical diagnosis or differential diagnosis. Although a clinical diagnosis might suffice in some instances, a definitive(microscopic) diagnosis is frequently required for proper treatment. In order to get some information about making accurate diagnosis and setting up appropriate treatment plan, we did clinical study and histopathologic classification of 82 patients who visited and were operated for submandibular masses at Department of Oral and Maxillofacial Surgery in Seoul National University Hospital from 1988 to 1992. The result were as follows : 1. Submandibular masses occured most frequently in forties and fifties, and there was no sex predilection. 2. Chief complaints were in order of mass, swelling, pain and consistency were soft mass, mobile hard mass, firm mass, diffuse swelling in descending order. 3. Most frequent pathologic finding was lymphadenitis. 4. Site of submandibular masses were submandible, neck, submental, retromandible in descending order, and there was no predilection between left and right side. 5. Accuracy rate between clinical impression and result was 51.2%.

  • PDF

소프트웨어 개발 명세서의 불일치 요소 검출방안 (A Method for Detecting Inconsistent Element of Software Development Specification)

  • 최신형
    • 한국콘텐츠학회논문지
    • /
    • 제5권2호
    • /
    • pp.213-219
    • /
    • 2005
  • 소프트웨어를 개발할 때 작성되는 명세서들은 개별특성으로 인해 연속적인 자동화가 이루어지지 않으며, 소프트웨어 감리에서도 많은 불일치 항목이 발견된다. 본 논문에서는 분석 및 설계단계에서 작성되는 명세서간 일관성 유지를 위하여 감리관련자료를 분석하여 불일치 항목 분류기준을 설정한다. 이를 기초로 명세서 불일치 항목 추출 방법을 제안한다. 이를 이용하면, 분석 및 설계단계에서 작성되는 명세서의 오류를 줄임으로써 최종산출물인 소프트웨어에 대한 품질을 향상시킬 수 있다.

  • PDF