Meftah, Nouha;Ezzeddine, Abdessalem;Bedoui, Ahmed;Hannachi, Ahmed
Membrane and Water Treatment
/
v.11
no.4
/
pp.303-312
/
2020
This study aims to investigate at a laboratory scale fluorides removal from an industrial wastewater having excessive F- concentration through a hybrid process combining neutralization and membrane separation. For the membrane separation operation, both Reverse Osmosis (RO) and Nanofiltration (NF) were investigated and confronted. The optimized neutralization step with hydrated lime allowed reaching fluoride removal rates of 99.1± 0.4 %. To simulate continuous process, consecutive batch treatments with full recirculation of membrane process brines were conducted. Despite the relatively high super saturations with respect to CaF2, no membrane cloaking was observed. The RO polishing treatment allowed decreasing the permeate fluoride concentration to 0.9± 0.3 mg/L with a fluoride rejection rate of 93± 2% at the optimal transmembrane pressure of around 100 psi. When NF membrane was used to treat neutralization filtrate, the permeate fluoride concentration dropped to 1.1± 0.4 mg/L with a fluoride rejection rate of 88± 5% at the optimal pressure of around 80 psi. Thus, with respect to RO, NF allowed roughly 20% decrease of the driving pressure at the expense of only 5% drop of rejection rate. Both NF and RO permeates at optimal operating transmembrane pressures respect environmental regulations for reject streams discharge into the environment.
In order to develop a technology for the recovery of pure tin from the Sn containing industrial wastes (SIWs), a process consisted of high temperature reduction and electrorefining was investigated. The tin which exists as oxide in SIWs was successfully reduced by two consecutive high temperature treatments and 92.7% of the tin was recovered. The purity of the tin thus obtained was increased to 99.87% by electrorefining. By applying the results obtained in this work, a commercial process can be developed to produce pure tin metals from domestic spent resources, which can reduce the amount of tin imported from abroad.
Carbothermal reduction has been one of the important processes for the production of ceramic raw materials such as silicon carbide, silicon nitride, boron carbide, etc. The process has also been one of several trials for the recovery of ZnO from ZnO-containing waste. It usually involves two consecutive steps: the evolution of Zn vapor and its oxidation with air. In this study a ZnO-containing raw material is reduced by carbon at $1250^{\circ}C$ and the evolved Zn vapor is oxidized with air, resulting in fine powders of ZnO. computer programs, THERMO and PYROSIM developed by MINTEK, are used to simulate the process thermodynamically and the results are compared with the experimental results. It is shown that the ZnO-containing raw material can be reduced and can form fine ZnO with the yield as high as 98.7% under a proper condition. Based on these results, a process is engineered for the production of ZnO in a rotary kiln at a rate of 3 tons/day. The produced ZnO powders show properties suitable to the usual applications in ceramic industries with a purity of > 95wt% and an average particle size of ∼3${\mu}m$.
Ha, Sung-Kil;Lee, Jung Eun;Moon, Woo Sung;Baek, Kwang Ryul
Journal of Institute of Control, Robotics and Systems
/
v.21
no.8
/
pp.742-747
/
2015
The quality of steel plate products is determined by the number of defects and the process problems are estimated by shapes of defects. Therefore pinholes defects of cold rolled steel have to be controlled. In order to improve productivity and quality of products, within each production process, the product is inspected by an adequate inspection system individually in the lines of steelworks. Among a number of inspection systems, we focus on the pinholes detection system. In this paper, we propose an embedded system using FPGA which can detect pinholes defects. The proposed system is smaller and more flexible than a traditional system based on expensive frame grabbers and PC. In order to detect consecutive defects, FPGAs acquire two dimensional image and process the image in real time by using correlation of lines. The proposed pinholes detection algorithm decreases arithmetic operations of image processing and also we designed the hardware to shorten the data path between logics due to decreasing propagation delay. The experimental results show that the proposed embedded system detects the reliable number of pinholes in real time.
Journal of the Korean Society for Aviation and Aeronautics
/
v.31
no.2
/
pp.66-71
/
2023
In the case of the Navy, if some of the co-pilots are included in the long-term promotion process due to the limited number of co-pilots, operational flight and administrative tasks will be added to the co-pilots not included in the rest of the Pilot in commander process. Therefore, to solve this problem, the co-pilot who has passed the PQS step-by-step process minimizes the personnel gap in the flight operation unit through a system that evaluates whether it is possible to perform its duties as a co-pilot through actual flight after entering the school. The advantage of the PQS course is that you can control flight plans on your own and minimize gaps in flight and ground work while carrying out the curriculum, but you can't focus on education or improve your skills due to irregular training flight cycles. Therefore, in this study, after collecting opinions on effective flight cycles through a survey of pilots of P-3C, the Navy's fixed-wing aircraft representative, we will analyze the association of aircraft volume performance by flight cycle to derive the optimal flight cycle of the P-3C pilot course.
This study was designed to investigate the changes of nurses' role model, perceptions toward occupation, and self actualization value in terms of the phases of socialization process. Two hundred and sixty nine nurses working in clinical settings were randomly selected from 15 general hospitals despersed over Seoul and Kyungki province. Data were gathered by the standardized Perceptual Orientation Test, the Self-actualization Test, and Questionnaires on role models and phases of socialization process developed by the investigators from October 1985 to March 1986. The data were analysed by ANOVA and Pearson's Correlation Coefficient. The results were as follows: 1. The average time period required for the shift of phases of socialization process were; phase Ⅰ, role adjustment, took average 10 months of employment: Phase Ⅱ, interpersonal adjustment, 12 months: and Phase Ⅲ, role conflict, 15 months respectively. Conflict resolution, phase Ⅳ, began to take place 18 months of employment; and shifted to phase V, internalization and self-actualization at 25 months of employment. 2. Throughout 5 consecutive phase, the number of immediate superior nurse model was dominantly the highest among the role models. The number of head nurse role model increased at phase Ⅱ, phase Ⅲ, and phase Ⅳ. Respondents with school model in phase I tended to transfer to work model at phase Ⅱ. 3. The perceptions toward occupation were not significantly influenced by the Phases of socialization process. 4. The score of self-actualization value was not significantly influenced by the phases of socialization process. 5. In regard to perceptions toward occupation, nursing director model group showed significantly lower score in phase I (p<.01). 6. The comparison of self-actualization value between the 5 phases revealed significant difference in phase I: in particular among respondents with school model at p<.05. To conclude: 1. The phase Ⅲ of socialization process is the period of role conflict which occur at 15 months of employment, an6 conflict resolution, phase Ⅳ, begins at 18 months of employment on the average in clinical settings. 2. The immediate superior nurse and the head nurse are important role models for nurses all through their socialization process.
This study has analyzed the meaning of observation time in the course of acquiring the information of subjects who observed the space of hall in subway stations to figure out the process of spatial information excluded and the features of intensive searching. The followings are the results from the analysis of searching process with the interpretation of the process for information acquirement through the interpretation of observation area and time. First, based on the general definition of observation time, the reason for analyzing the features of acquiring spatial information according to the subjects' observation time has been established. The feature of decreased analysis data reflected that of observation time in the process of perceiving and recognizing spatial information, which showed that the observation was focused on the enter of the space during the time spent in the process of observing the space and the spent time with considerable exclusion of bottom end (in particular, right bottom end). Second, while the subjects were observing the space of hall in subway stations, they focused on the top of the left center and the signs on the right exit the most, which was followed by the focus on the both side horizontally and the clock on the top. Third, the analysis of consecutive observation frequency enabled the comparison of the changes to the observation concentration by area. The difference of time by area produced the data with which the change to the contents of spatial searching in the process of searching space could be known. Fourth, as the observation frequency in the area of I changed [three times -> six times -> 9 times], the observation time included in the area increased, which showed the process for the change from perception to recognition of information with the concentration of attention through visual information. It makes it possible to understand that more time was spent on the information to be acquired with the exclusion of the unnecessary information around.
The water quality improvement of golf course ponds, as representative stagnant stream channels, was evaluated by applying a biological activated carbon (BAC) process composed of four consecutive activated carbon reactors. The study was performed from autumn to winter in order to evaluate the feasibility of the BAC process under low temperature conditions. In the study, water quality of pond A (target pond) and pond B (reference pond) were monitored. Pond water was pumped into the BAC process, and was then returned to the pond after treatment. The optimal conditions were determined to be 2 hr of empty bed contact time (EBCT) at a temperature above $4^{\circ}C$, in which improvements of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP) of pond A compared to pond B were 3.62%, 3.48% and 1.81%, respectively. On the other hand, as the temperature was below $4^{\circ}C$, some degree of water quality improvement was achieved even when EBCT were 1 or 0.5 hr, suggesting that the BAC process can be successfully applied for the improvement of pond water quality in winter months. The values of biomass concentration and microorganism activity in each condition were highest where 2 hr of EBCT was applied at a temperature above $4^{\circ}C$, but values were similar throughout all treatment conditions, and thus, adsorption is considered to be the dominant factor affecting process efficiency. From the denaturing gel gradient electrophoresis (DGGE) results, no significant differences were observed among the activated carbon reactors, suggesting that the number of reactors in the system could be decreased for a more compact application of the system.
Journal of the Institute of Electronics and Information Engineers
/
v.52
no.7
/
pp.51-62
/
2015
Of recent interests on high capacity DNA storage, DNA watermarking for DNA copyright protection, and DNA steganography for DNA secret communication are augmented, the reversible DNA watermarking is much needed both to embed the watermark without changing the functionality of organism and to perfectly recover the host DNA sequence. In this paper, we address two ways of DE based reversible DNA watermarking using noncoding DNA sequence. The reversible DNA watermarking should consider the string structure of a DNA sequence, the organism functionality, the perfect recovery, and the high embedding capacity. We convert the string sequence of four characters in noncoding region to the decimal coded values and embed the watermark bit into coded values by two ways; DE based multiple bits embedding (DE-MBE) using pairs of neighbor coded values and consecutive DE-MBE (C-DE-MBE). Two ways process the comparison searching to prevent the false start codon that produces false coding region. Experimental results verified that our ways have more high embedding capacity than conventional methods and produce no false start codon and recover perfectly the host sequence without the reference sequence. Especially C-DE-MBE can embed more high two times than DE-MBE.
Objective : It has been demonstrated that cervical laminoplasty is an effective and safe method of treating multi-level cervical spondylotic myelopathy and ossification of the posterior longitudinal ligament. However, recent reports have suggested that axial neck pain is frequently encountered after cervical laminoplasty. The aim of the present study was to determine clinical significance of the C7 spinous process on axial neck pain after cervical laminoplasty. Methods : A total of 31 consecutive patients that underwent cervical laminoplasty between March 2002 and December 2008 were reviewed. The authors evaluated and compared axial neck pain and lordotic angle in patients that underwent C7 spinous process preserving surgery (group 1, n=16) and in patients in which the C7 spinous process was sacrificed (group 2, n=15). Results : Severe or moderate early axial pain occurred in 56.2% of patients in group 1 and in 86.6% in group 2. Severe or moderate late axial pain occurred in 12.5% in group 1 and in 73.3% in group 2. Eighty-Six percent of patients in group 2 and 43% in group 1 experienced aggravation of their axial neck pain during the early postoperative period. Aggravation of axial neck pain during early postoperative period was less common in group 1 but not statistically significant (p=0.073). Sixty-six percent of patients in group 2 and 12% in group 1 had aggravated axial neck pain at late postoperative period and aggravation of late axial neck pain was significantly less common in group 1 (p=0.002). Conclusion : The present study demonstrates that C7 spinous process preserving laminoplasty decreases the incidence of aggravated axial neck pain after cervical laminoplasty.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.