• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.290-291
• /
• 2008

Recently High Temperature Superconductor(HTS) Tape is limelight of the applied superconducting machines. Mainly used superconducting tape are BSCCO tape and YBCO coated tape. These superconducting tape are applied such as SMES, superconducting generator and MAGLEV. Actually superconductor tape's experimental gauge is short. For this reason, experiment was conducted. Firstly length of 50cm BSCCO, YBCO Coated conductor@Cu and YBCO coated conductor@sus are prepared. and flow the over-current. Secondly, BSCCO and Coated conductor connected with lenth of 25cm and flow the over-current. Coupled line of HTS tape was compared with single line of HTS tape and these overcurrent characteristics was investigated.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.69-74
• /
• 2003

To investigate the partial discharge and electric field distribution in cable joint parts, we measured the partial discharge and electric field in specimen. The specimens which cross-linked polyethylene(XLPE) and ethylene propylene diene ethylene(EPDM) are used to insulating material for underground cable md cable jointing parts. The polymers are used to insulating material in switchgear which is a kind of transformer equipment and in ultra-high voltage cable. Its using is increasing gradually, the electrical insulation properties are not only excellent but also mechanical property is excellent. And because it is possible to be made void of several type in insulator while it is produced, which the electrical field distribution is changed by void, it has a critical influence to insulator performance. The underground cable is connecting by the jointing material, insulating breakdown and the electric ageing which are caused by several mixing impurity and the damage of cable insulator layer, which reduced the life of cable while intermediate joint kit is connected. Therefore, the computer simulation is used to estimating insulator performance, XLPE is used to the insulating material of ultra-high voltage cable and EPDM is used to insulator layer in joint material kit, and which are produced as specimen. And it is analyzed the electric field concentrating distribution and partial discharge by modeling of computer simulation in void and cable joint kit.

• Journal of Conservation Science
• /
• v.37 no.1
• /
• pp.43-54
• /
• 2021

In this study, a scientific analysis of the gold leaf layers and internal structure of the Clay Seated Vairocana Buddha Triad in Seonunsa Temple, Gochang (Treasure No. 1752) was conducted. The surface of the Buddha statues is a gold foil, and the gold leaf layer consists of four layers. The gold leaf layer first composed on the molding clay was produced in the order of lacquer-fabrics-lacquer-gold foil. Subsequently, it was confirmed that the work was performed three times in the same way. The composition of the Buddha statues was divided into the head, body or upper body, lower body, and pedestal. The body was made in a cylindrical form by connecting vertically oriented wooden materials, and the head and lower body were also connected to the body in an empty form. Thus, the head, body, and lower body are grafted structures that are connected to a single Bokjang-gong. It was confirmed that the Clay Seated Vairocana Buddha Triad in Seonunsa Temple was made using wood materials for the basic form, after which the detailed form was created with molding clay, and the surface was finished with a process of layering gold foil and substances presumed to be lacquer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.4
• /
• pp.624-637
• /
• 2022

The purpose of this study was to develop a compression inner layer (CIL) that can be attached to dress shirts for men who have gynecomastia (male breast enlargement). For this, we developed shirts with CIL prototypes based on the functional, expressive, and aesthetic (FEA) consumer needs model. The user-centered design principle guided the design process. Based on size measurements, in-depth interviews, and an online survey, the design requirements for dress shirts with a CIL were determined, and the prototype was developed. The dress shirts were constructed of polyester and spandex mixed materials, while the CIL was made of thin mesh fabric knitted from 80% polyester and 20% spandex. A CIL prototype was developed with a front zipper fastening to hold the upper body tight and compress the breast area. The CIL was attached by connecting a strap with snap buttons to loops sewn into the shoulder line of the dress shirt. In the trial and sensory test, the prototype helped breast size decrease while meeting target consumer needs. The outcomes of this study provide necessary insights to develop garments for gynecomastia patients.

• Smart Structures and Systems
• /
• v.33 no.1
• /
• pp.41-53
• /
• 2024

Grouting sleeves are an essential connecting component of prefabricated components, and the quality of grouting has a significant influence on structural integrity and seismic performance. The embedded grouting sleeve (EGS)'s grouting defects are highly undetectable and random, and no effective monitoring method exists. This paper proposes an ultrasonic guided wave method and provides a set of guidelines for selecting the optimal frequency and suitable period for the EGS. The optimal frequency was determined by considering the group velocity, wave structure, and wave attenuation of the selected mode. Guided waves are prone to multi-modality, modal conversion, energy leakage, and dispersion in the EGS, which is a multi-layer structure. Therefore, a time-reversal (TR)-based multi-mode focusing and dispersion automatic compensation technology is introduced to eliminate the multi-mode phase difference in the EGS. First, the influence of defects on guided waves is analyzed according to the TR coefficient. Second, two major types of damage indicators, namely, the time domain and the wavelet packet energy, are constructed according to the influence method. The constructed wavelet packet energy indicator is more sensitive to the changes of defecting than the conventional time-domain similarity indicator. Both numerical and experimental results show that the proposed method is feasible and beneficial for the detection and quantitative estimation of the grouting defects of the EGS.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.10
• /
• pp.950-953
• /
• 2008

YBCO coated conductor called the second-generation superconducting tapes have resistance increase significantly more than BSCCO tapes in terms of the speed or amount when quench occurs, they may have different ranges of application. Such characteristics are thought to get different properties by selection of stabilizing materials in manufacturing superconducting tapes. It is important in selecting superconducting tapes which will be applied to power devices in the future. In this study, one kind of BSCCO tapes and two kinds of YBCO CC with different stabilizing materials and one kind of YBCO CC with non stabilizing materials were used to compare and examine transport characteristics in flux-flow state and quench state with each tape joint of HTS tapes.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.5-8
• /
• 1999

In this paper, we suggest a way of implementing ISDN S-Interface through two-wire premises telephone networks instead of using four wires as in the existing ISDN systems. This will help many developing or underdeveloped countries in the world to introduce ISDN services, where they have only two or low wires as in-building telephone networks. We suggest new physical-layer specifications for two-wire S-interface similar to that in ITU-T recommendations I.430 for four-wire systems, design a tranceiver according to the suggested specifications, and implement it using an FPGA We build a test board with the chip on it and succeed in connecting to Internet.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.679-686
• /
• 2008

Wireless LAN(WLAN) is a rather mature communication technology connecting mobile terminals. IEEE 802.11 is a representative protocol among WLAN technologies. With the rising popularity of delay-sensitive real-time multimedia applications(video, voice and data) in IEEE 802.11 wireless LAN, it is important to study the MAC layer delay performance of WLANs. In this paper, performance for packet delay model that recently have been proposed schemes is analysed in wireless LAN and proved performance results via simulation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.106-114
• /
• 2008

In this paper we suggest a protocol and an algorithm which connect a secure channel between a server and a client over a TCP layer. To make key exchange time the most quickly, the protocol adopts ECC Diffie Hellman(ECCDH) algorithm. And the protocol does not use Hello message for key exchanges and state changes. We also implement this protocol over an open TCP/IP program and check the secure channel connecting time over the military computer network. The suggested protocol could be practically used on the military computer network without a hardware implementation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2000.10a
• /
• pp.51-65
• /
• 2000

Among legal unit of land registration, the minimum unit of land is one parcel. We give the parcel number according to numbering system to confirm the specification of the parcel. In Korea, this parcel number is used for daily life such as the sign of fixed place(address) and the property, of the place of register, of identification card and of legal action. It also plays the important role as a key item connecting the layer of other information system in organizing Land Information System. It is also valued as the sources looking for the process of developing of the country. This study will devote to cadastral history, reform and reestablishment of the country.