• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.30-34
• /
• 2019

Four different diisocyanates (IPDI; isophorone diisocyanate, HDI; hexamethylene diisocyanate, HMDI; dicyclohexylmethane-4,4'-diisocyanate, and XDI; m-xylylene diisocyanate) were used to prepare polyurethane gel-coats, and the weatherabilities, physical properties, and surface characteristics of the gel-coats were investigated with respect to the chemical structure of the diisocyanates. The weathering test results indicated that all of the diisocyanates used in this study were suitable for use in the preparation of the polyurethane gel-coat. However, the set-to-touch times and physical properties of the polyurethane gel-coat indicated that the cycloaliphatic diisocyanate (IPDI and HMDI) were ideal for the preparation of polyurethane gel-coats.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.109-119
• /
• 2018

This study has performed to identify the effect of safety behavior, safety climate and its satisfaction through the Behavior Based Safety Program for 5 sites of the same Company. The study result indicated that the level of recognized safety behavior, climate and its satisfaction improved by conducting observation of worker behavior, jobsite feedback, displaying feedback chart, safety training, behavior modification committee. Additionally, the participation level of safety activity and conformity level of safety rule improved. The recognized level of safety climate improved together with recognized safety value by management, safety participation of direct boss, communication with each other to be dealt with safety matter, safety training material to be contained unsafe behavior and practical hazard, understanding and conducting safety standard. In addition, The recognized level of satisfaction improved together with safety behavior and climate. As a result, this program provided an opportunities to correct worker's unsafe behavior to safe behavior in conjunction with increasing number of observation, providing additional time to have a safety check, safety suggestion to improve work situation and a permit to work rule. It will be integrated into health and safety management system to be able to reduce industrial accident.

• Wind and Structures
• /
• v.19 no.5
• /
• pp.523-540
• /
• 2014

This paper presents a comprehensive study of pressure developed on different faces of a 'Y' plan shape tall building using both numerical and experimental means. The experiment has been conducted in boundary layer wind tunnel located at Indian Institute of Technology Roorkee, India for flow condition corresponding to terrain category II of IS:875 (Part 3) - 1987, at a mean wind velocity of 10 m/s. Numerical study has been carried out under similar condition using computational fluid dynamics (CFD) package of ANSYS, namely ANSYS CFX. Two turbulence models, viz., $k-{\varepsilon}$ and Shear Stress Transport (SST) have been used. Good conformity among the numerical and experimental results have been observed with SST model yielding results of higher magnitude. Peculiar pressure distribution on certain faces has been observed due to interference effect. Furthermore, flow pattern around the model has also been studied to explain the phenomenon occurring around the model.

• Advances in concrete construction
• /
• v.8 no.4
• /
• pp.311-320
• /
• 2019

In this study, the effect of cellulose nanocrystals (CNCs) on the fire resistance properties of fiber-reinforced cement composites was investigated. The main variables were CNCs content (0.4, 0.8 and 1.2vol.% compared with cement), steel fiber ratio, and exposure temperature (100, 200, 400, 600 and 800℃). The fire resistance properties, i.e., residual compressive strength, flexural strength, and porosity, were evaluated in relation with the exposure temperature of the specimens. The CNCs suspensions were prepared to composited dispersion method of magnetic stirring and ultra-sonication. CNCs are effective for increasing the compressive strength at high temperatures but CNCs do not seem to have a significant effect on flexural reinforcement. Porosity test result showed CNCs reduce the non-hydration area inside the cement and promote hydration.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.1 s.33
• /
• pp.31-43
• /
• 1990

This research studied the first impression of a stranger in various styles of Korean or Western attire in several socially interacting contexts. The semantic differential scale was used to analyze the responses of IHO male and 180 female university students to line drawings of male and female figures in Korean or Western formal and informal attire in campus, office, and ambiguous contexts. The data were analyzed by factor analysis, one-way ANOVA, and Duncan's test. Six factors emerged to account for dimensions of first impressions. These were evaluation, potency, prestige and formality, conformity, likableness, and conspicuousness. Clothing styles had a larger effect on responses than context. Persons in traditional Korean styles were perceived as more prestigious, formal, individualistic, and less competent than those in Western styles. Conversely persons in both formal and informal Western styles were perceived as more attractive and more competent than those in traditional Korean styles. Persons in casual Western styles were considered least prestigious and least formal. A weak interaction effect was found between clothing style and social context.

• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.1045-1055
• /
• 2017

Tensile strength is considered key properties for characterizing rock material in engineering project. It is determined by direct and indirect methods. Point load test is a useful testing method to estimate the tensile strengths of rocks. In this paper, the effects of rock shape on the point load index of gypsum are investigated by PFC2D simulation. For PFC simulating, initially calibration of PFC was performed with respect to the Brazilian experimental data to ensure the conformity of the simulated numerical models response. In second step, nineteen models with different shape were prepared and tested under point load test. According to the obtained results, as the size of the models increases, the point load strength index increases. It is also found that the shape of particles has no major effect on its tensile strength. Our findings show that the dominant failure pattern for numerical models is breaking the model into two pieces. Also a criterion was rendered numerically for determination of tensile strength of gypsum. The proposed criteria were cross checked with the results of experimental point load test.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.165-173
• /
• 2010

In this paper, we evaluated the performance of 3D CRT, IMRT and three kind of RA plannings to investigate the clinical effect of RA with liver cancer case. The patient undergoing liver cancer of small volume and somewhat constant motion were selected. We performed 3D CRT, IMRT and RA plannings such as 2RA, limited triple arcs (3RA) and 3MRA with Eclipse version 8.6.15. The same dose volume objectives were defined for only CTV, PTV and body except heart, liver and partial body in IMRT and RA plannings. The steepness of dose gradient around tumor was determined by the Normal Tissue Objective function with the same parameters in place of respective definitions of dose volume objectives for the normal organs. The approach between the defined dose constraints and the practical DVH of CTV, PTV and Body was the best in 3MRA and the worst in IMRT. The DVHs were almost the same among RAs. Plans were evaluated using Conformity Index (CI), Homogeneity Index (HI) and Quality of coverage (QoC) by RTOG after prescription with dose level surrounding 98% of PTV in the respective plans. As a result, 3MRA planning showed the better favorable indices than that of the others and achieved the lowest MUs. In this study, RA planning is a technique that is possible to obtain the faster and better dose distribution than 3D CRT or IMRT techniques. Our result suggest that 3MRA planning is able to reduce the MUs further, keeping a similar or better targer dose homogeneity, conformity and sparing normal tissue than 2RA or 3RA.

• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.505-516
• /
• 2016

With the development of nanotechnology, nanomaterials are used in various fields. Therefore, the interest regarding the safety of nanomaterial use is increasing and much effort is diverted toward establishment of exposure assessment and management methods. Occupational exposure limits (OELs) are effectively used to protect the health of workers in various industrial workplaces. This study aimed to propose an OEL for domestic multi-walled carbon nanotubes (MWCNTs) based on animal inhalation toxicity test. Basic procedure for development of OELs was examined. For OEL estimation, epidemiological study and quantitative risk assessment are generally performed based on toxicity data. In addition, inhalation toxicity data-based no observed adverse effect level (NOAEL) and benchmark dose (BMD) are estimated to obtain the OEL. Three different estimation processes (NEDO in Japan, NIOSH in USA, and Baytubes in Germany) of OELs for carbon nanotubes (CNTs) were intensively reviewed. From the rat inhalation toxicity test for MWCNTs manufactured in Korea, a NOAEL of $0.98mg/m^3$ was derived. Using the simple equation for estimation of OEL suggested by NEDO, the OEL of $142{\mu}g/m^3$ was estimated for the MWCNT manufacturing workplace. Here, we used test rat and Korean human data and adopted 36 as an uncertainty factor. The OEL for MWCNT estimated in this work is higher than those ($2-80{\mu}g/m^3$) suggested by previous investigators. It may be greatly caused by different physicochemical properties of MWCNT and their dispersion method and test rat data. For setting of regulatory OELs in CNT workplaces, further epidemiological studies in addition to animal studies are needed. More advanced technical methods such as CNT dispersion in air and liquid should be also developed.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.115-125
• /
• 2015

This study investigated the fluidity, heat of hydration, setting time, strength development, and characteristics of hydration and pozzolanic reactions of high-strength high-volume ground granulated blast-furnace slag(GGBFS) blended cement pasts with the water-to-binder ratio of 20% by experiments, and analyzed the effects of the replacement ratio and fineness of GGBFS on the hydration and pozzolanic reaction. The results show that, in the high-strength mixtures with low water-to-binder ratio, the initial hydration is accelerated due to the "dilution effect" which means that the free water to react with cement increases by the replacement of cement by GGBFS, and thus, strengths at from 3 to 28 days were higher than those of plain mixtures with ordinary Portland cement only. Whereas it was found that the long term strength development is limited because the hydration reaction rates rapidly decreases with ages and the degree of pozzolanic reaction is lowered due to insufficient supply of calcium hydroxide according to large replacement of cement by GGBFS. Also, the GGBFS with higher fineness absorbs more free water, and thus it decreases the fluidity, the degree of hydration, and strength. These results are different with those of normal strength concrete, and therefore, should be verified for concrete mixtures. Also, to develop the high-strength concrete with high-volume of GGBFS, the future research to enhance the long-term strength development is needed.

• Journal of Life Science
• /
• v.33 no.3
• /
• pp.252-259
• /
• 2023

A decrease in ovarian function and sex hormone production with aging results in hormone deficiency, which causes menopause in women. Natural products have been investigated to develop estrogen-like substances to improve menopausal status in women. This study was performed to evaluate the efficacy of Gastrodia elata Blume extract (TVB-1000) in ovariectomized rats. After a recovery period of 7 days, the TVB-1000 treatment group was orally administered at 16, 40, and 100 mg/kg for 12 weeks. In the OVX-positive control group, 17β-estradiol was injected subcutaneously into the dorsal region of rats at a dose of 10 ㎍/kg. Results show that TG and LDL-C, which are cardiovascular disease markers, were significantly decreased in all concentrations of TVB-1000 administration in the treatment group, and the LDL-C/HDL-C ratio significantly decreased in the medium and high TVB-1000 concentrations of the treatment group. In addition, in the high concentration TVB-1000 treatment group, the weight of abdominal fat decreased with statistical significance. The low-dose and medium-dose administration groups showed statistical significance and the expression level of their ER-α increased, but ER-β did not show a significant change. The above experiment shows that owing to the estrogen-like effect of TVB-1000, it can be useful as a functional food material to prevent cardiovascular disease, which is one of the menopausal symptoms.