• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2008년도 춘계학술발표대회
• /
• pp.917-920
• /
• 2008

The Internet Key Exchange (IKE) protocol is most widely used as a security key exchange protocol on the Internet. Security policies used by the IKE protocol must be configured in advance, however the complex options and manual settings cause inconvenience. This paper proposes an automatic configuration method for the IKE protocol based on X.509 certificate. Security policies are embedded in the certificate, read, and added into the IKE configuration file by a negotiation assistant module in order to achieve automatic IKE configuration. Our proposed method reduces the complexity of configuration process and improves the adaptability of the IKE protocol.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.725-726
• /
• 2011

• ETRI Journal
• /
• 제23권3호
• /
• pp.111-120
• /
• 2001

For scalable multicast transport, one of the promising approaches is to employ a control tree known as acknowledgement (ACK) tree which can be used to convey information on reliability and session status from receivers to a root sender. The existing tree configuration has focused on a 'bottom-up' scheme in which ACK trees grow from leaf receivers toward a root sender. This paper proposes an alternative 'top-down' configuration where an ACK tree begins at the root sender and gradually expands by including non-tree nodes into the tree in a stepwise manner. The proposed scheme is simple and practical to implement along with multicast transport protocols. It is also employed as a tree configuration in the Enhanced Communications Transport Protocol, which has been standardized in the ITU-T and ISO/IEC JTC1. From experimental simulations, we see that the top-down scheme provides advantages over the existing bottom-up one in terms of the number of control messages required for tree configuration and the number of tree levels.

• Journal of Communications and Networks
• /
• 제7권4호
• /
• pp.525-536
• /
• 2005

In an IP-based network, automated dynamic assignment of IP addresses is preferable. In most wired networks, a node relies on a centralized server by using dynamic host configuration protocol (DHCP) to obtain a dynamic IP address. However, the DHCP­based approach cannot be employed in a mobile ad hoc network (MANET) due to the uncertainty of any centralized DHCP server. That is, a MANET may become partitioned due to host mobility. Therefore, there is no guarantee to access a DHCP server. A general approach to address this issue is to allow a mobile host to pick a tentative address randomly, and then use duplicate address resolution (DAR) protocol to resolve any duplicate addresses. In this paper, an innovative distributed dynamic host configuration protocol designed to configure nodes in MANET is presented. The proposed protocol not only can detect the duplicate address, but also can resolve the problem caused by duplicate address. It shows that the proposed protocol works correctly and is more universal than earlier approaches. An enhanced version of DAR scheme is also proposed in this paper to solve the situation of duplicate MAC address. The new and innovative approach proposed in this paper can make the nodes in MANET provide services to other networks and avoid packets from being delivered to incorrect destinations.

• Journal of applied mathematics & informatics
• /
• 제8권2호
• /
• pp.531-537
• /
• 2001

In order for all participants at video conference to communicate mutually, the conference key should be necessary. In this paper, we present the communication protocol that generates a conference key efficiently based on $(\upsilon,\kappa,\lambda)$-configuration, one class of block designs, which minimizes message transmission overhead needed for this key. Especially, in the case of ${\lambda}=1$, the protocol requires only $O(\sqrt[v]{v})$ messages, where v is the number of participants.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.560-563
• /
• 2002

This paper proposes a home control system architecture that have network configuration function. The proposed home control system architecture is implemented with partly hardware and software. For implementation of this system architecture, we developed ECONICS which is home automation controller. ECONICS consists of main board and communication modem. This communication modem supply the power line communication. The physical layer and the MAC layer software of EIA 709.1 standard protocol are implemented in communication modem. The upper layer software of EIA 709.1 standard protocol and home configuration software for home network installation, management, diagnostics, control and monitoring are implemented in main board of ECONICS. We verified the commercial feasibility of the proposed system through the home network configuration and operation. As a result, we have concluded that the proposed home control system architecture provides all the key function necessary to easily manage and control home network nodes.

• 대한임베디드공학회논문지
• /
• 제7권1호
• /
• pp.41-52
• /
• 2012

Recently, FlexRay was developed to replace controller area network (CAN) protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. FlexRay network systems require correct synchronization and complex scheduling parameters. However, because platform configuration register (PCR) setting and message scheduling is complex and bothersome task, FlexRay is more difficult to implement in applications than CAN protocol. To assist a network designer for implementing FlexRay cluster, this paper presents an analysis of FlexRay platform configuration register and automatic generation program of PCR. To demonstrate the feasibility of the automatic generation program, we evaluated its performance using experimental testbed.

• 한국정보처리학회논문지
• /
• 제3권4호
• /
• pp.709-719
• /
• 1996

DHCP는 호스트에게 IP(Internet Protocol) 주소나 구성 파라미터 (Configuration Parameter) 등을 동적으로 할당해주는 프로토콜이다. 그러나 이프로토콜은 메시지를 교환하기 위해 브로드캐스팅을 이용하기 때문에 네트워크에 과중한 트래픽의 발생 요인이 된다. 이러한 오버헤드를 줄이기 위해 메시지 교환시에 가능하면 브로드 캐스 팅을 피하고, 간결하고 효율적인 클라이언트-서버의 동작 메처니즘을 설계하였다. 본 연구에서는 DHCP가 유발하는 브로드캐스팅 트래픽 특성을 고찰하여 메시지를 유치캐스트 할 수 있는 방안과 트래픽을 줄일 수 있도록 알고리즘을 개선한 DHCP의 모델을 구현하였다.

• 한국산업정보학회논문지
• /
• 제11권3호
• /
• pp.47-58
• /
• 2006

IPv6 프로토콜의 주요 장점 중의 하나는 주소 자동 설정 기능이다. IPv6 호스트들은 이 기능에 의해 자동으로 네트워크 설정이 가능하지만 IPv6 라우터들은 여전히 수동으로 설정되어야 한다. 이러한 문제를 해결하기 위해 본 논문에서는 여러 개의 라우터와 서브 네트워크들로 구성되는 소규모 IPv6 네트워크 상의 모든 라우터들을 자동 설정할 수 있는 새로운 프로토콜을 제안한다. 제안된 라우터 자동설정 프로토콜은 ISP에서 할당된 IPv6 네트워크 프리픽스를 사용하여 사이트 내부의 모든 라우터들의 프리픽스와 라우팅 정보를 자동 생성하고 전달할 수 있는 기능을 가진다. 본 논문에서 제안된 라우터 자동 설정 기능 은 소규모 사무실이나 특히 홈 네트워크와 같이 전문 네트워크 관리자가 없는 IPv6사이트의 네트워크 자동 설정을 위해 많이 활용될 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.481-484
• /
• 2000

In this paper, we describe the design and implementation of IPv6 LAN. The legacy protocol for Internet is IPv4(IP version 4). The ability of IPv4 is not enough for modern real time multimedia communication services. So IPv6(IP version 6) protocol was suggested to resolve the problems of IPv4. We implemented IPv6 LAN using sTLA(sub Top Level Aggregation identifier) address and KOREN(KOrea Research and Experimental Network). Our IPv6 LAN is connected with 6TAP(Chicago), WIDE(Tokyo), and SingAREN(Singapore). We used a dedicated router, Windows 2000 PC host FreeBSD PC host, Solaris 7 workstation and Solaris 8 workstation for IPv6 NDP(Neighbor Discovery Protocol) protocol test. To support all data services including voice and video, IP protocol should be enhanced because the characteristics of modern network services are requiring QoS(Quality of Service) functions, auto-configuration, security, mobility and so on. So a new IP protocol, IPv6, has been developing to meet the requirements. In this paper, we introduce the implementation method and configuration information of IPv6 LAN.