• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.67-72
• /
• 2015

Arrested pneumatization of the sphenoid sinus is a developmental variant that is not always well recognized and is often confused with other pathologies associated with the skull base. This report describes the case of a patient referred for cone-beam computed tomography (CBCT) imaging for dental implant therapy. CBCT demonstrated a well-defined incidental lesion in the left sphenoid sinus with soft tissue-like density and sclerotic borders with internal curvilinear opacifications. The differential diagnoses included intraosseous lipoma, arrested pneumatization of the sphenoid sinus, chondrosarcoma, chondroid chordoma, and ossifying fibroma. The radiographic diagnosis of arrested pneumatization was based on the location of the lesion, its well-defined nature, the presence of internal opacifications, and lack of expansion. Gray-scale CBCT imaging of the area demonstrated values similar to fatty tissue. This case highlighted the fact that benign developmental variants associated with the skull base share similar radiographic features with more serious pathological entities.

• Imaging Science in Dentistry
• /
• v.51 no.2
• /
• pp.195-201
• /
• 2021

Unusual radiographic findings of intraosseous ameloblastoma have been reported and discussed. In the case discussed herein, cone-beam computed tomography (CBCT) clearly showed many radiographic features that were ambiguous on conventional radiographs, including an ill-defined periphery, extensive superficial buccal extension with minimal lingual extension, obvious bucco-crestal expansion, and multiple triangular (Codman's triangle-like) areas of periosteal reaction. Based on the above-mentioned findings, the differential diagnosis was a long-term infected benign or low-grade malignant lesion. An incisional biopsy was performed, and the histopathologic diagnosis was acanthomatous ameloblastoma. Recurrence of the lesion was clearly detected on CBCT images at 4 and 8 years after surgery. These unusual radiographic findings have never been reported to be associated with ameloblastoma, and thus may contribute to novel concepts in radiographic interpretation in the future. This report also underscores the important role played by CBCT as a comprehensive diagnostic tool and for definite confirmation of recurrence.

• Imaging Science in Dentistry
• /
• v.40 no.2
• /
• pp.59-62
• /
• 2010

Purpose : To investigate and compare the prevalence, size, and location of maxillary sinus septa on panoramic and cone beam computed tomography (CBCT) images. Materials and Methods : Two hundred patients who had taken both panoramic and CBCT images were included. The location of maxillary sinus septa on the panoramic radiographs were recorded and confirmed on the CBCT images. Also the size of septa was measured on the reformatted CBCT images. Results : The prevalence of the patients who had maxillary sinus septa was 51.0% and they showed 179 septa totally. Among them 51.0% of the patients had one septum, 32.4% two septa, 13.7% three, and 2.9% four. The measured heights of the septa were $4.37{\pm}2.87\;mm$, $3.51{\pm}2.47\;mm$, and $3.04{\pm}2.37\;mm$ in the medial, middle, and lateral areas, respectively. It was revealed that 1.0% was located at canine region, 18.0% at first premolar, 25.0% at second premolar, 22.7% at first molar, 19.8% at second molar, and 14.0% at third molar region. Among 213 septa depicted by the panoramic radiographs, only 69.0% were confirmed at the CBCT images. Conclusion : Since various heights and courses of the septa can develop in all parts of the maxillary sinus, adequate assessment of the inner aspect of the maxillary sinus is essential to avoid complications during sinus augmentation procedures. CBCT scanning is the preferred radiographic method for detecting the presence of sinus septa.

• Imaging Science in Dentistry
• /
• v.49 no.3
• /
• pp.213-218
• /
• 2019

Purpose: The aim of this study was to evaluate the relationship between the mandibular canal and impacted mandibular third molars using cone-beam computed tomography (CBCT) and to compare the CBCT findings with signs on panoramic radiographs(PRs). Materials and Methods: This retrospective study consisted of 200 mandibular third molars from 200 patients who showed a close relationship between the mandibular canal and impacted third molars on PRs and were referred for a CBCT examination of the position of the mandibular canal. The sample consisted of 124 females and 76 males, with ages ranging from 18 to 47 years (mean, $25.75{\pm}6.15$ years). PRs were evaluated for interruption of the mandibular canal wall, darkening of the roots, diversion of the mandibular canal, and narrowing of the mandibular canal. Correlations between the PR and CBCT findings were statistically analyzed. Results: In total, 146 cases(73%) showed an absence of canal cortication between the mandibular canal and impacted third molar on CBCT images. A statistically significant relationship was found between CBCT and PR findings (P<0.05). The absence of canal cortication on CBCT images was most frequently accompanied by the PR sign of diversion of the mandibular canal(96%) and least frequently by interruption of the mandibular canal wall(65%). Conclusion: CBCT examinations are highly recommended when diversion of the mandibular canal is observed on PR images to reduce the risk of mandibular nerve injury, and this sign appears to be more relevant than other PR signs.

• Imaging Science in Dentistry
• /
• v.37 no.2
• /
• pp.103-110
• /
• 2007

Purpose: To examine the danger zone of mesial root of mandibular first molar of patient without extraction using CBCT (cone-beam computed tomography) to avoid the risk of root perforation. Materials and Methods: 20 mandibular first molars without caries and restorations were collected, CT images were obtained by CBCT ($PSR9000N^{TM}$, Asahi Roentgen Co., Japan), reformed and analyzed by V-work 5.0 (CyberMed Inc., Korea), Distance between canal orifice and furcation was measured. In cross sectional images at 3, 4 and 5 mm below the canal orifice, distal wall thickness of mesiobuccal canal (MB-D), distal wall thickness of mesiolingual canal (ML-D), distal wall thickness of central part (C-D), mesial wall thickness of mesiobuccal canal (MB-M) and mesial wall thickness of mesiolingual canal (ML-M) were measured, Results: The mean distance between the canal orifice and the furcation of the roots is 2.40 mm, Distal wall is found to be thinner than mesial wall. Mean dentinal wall thickness of distal wall is about 1 mm, The wall thickness is thinner as the distance from the canal orifice is farther. But significant differences are not noted between 4 mm and 5 mm in MB-D and C-D, MB-D is thinner than ML-D although the differences is not significant. Conclusion: The present study confirmed the anatomical weakness of distal surface of the coronal part of the mesial roots of mandibular first molar by CBCT and provided an anatomical guide line of wall thickness during endodontic treatment.

• Imaging Science in Dentistry
• /
• v.37 no.3
• /
• pp.157-163
• /
• 2007

Purpose: To evaluate the characteristics of (widely used) cone beam computed tomography (CBCT) images. Materials and Methods: Images were obtained with CT performance phantoms (The American Association of Physicists in Medicine; AAPM). CT phantom as the destination by using PSR $9000N^{TM}$ dental CT system (Asahi Roentgen Ind. Co., Ltd., Japan) and i-CAT CBCT (Imaging Science International Inc., USA) that have different kinds of detectors and field of view, and compared these images with the CT number for linear attenuation, contrast resolution, and spatial resolution. Results: CT number of both PSR $9000N^{TM}$ dental CT system and i-CAT CBCT did not conform to the base value of CT performance phantom. The contrast of i-CAT CBCT is higher than that of PSR $9000N^{TM}$ dental CT system. Both contrasts were increased according to thickness of cross section. Spatial resolution and shapes of reappearance was possible up to 0.6 mm in PSR $9000N^{TM}$ dental CT system and up to 1.0 mm in i-CAT CBCT. Low contrast resolution in region of low contrast sensitivity revealed low level at PSR $9000N^{TM}$ dental CT system and i-CAT CBCT. Conclusion: CBCT images revealed higher spatial resolution, however, contrast resolution in region of low contrast sensitivity was the inferiority of image characteristics.

• Imaging Science in Dentistry
• /
• v.44 no.2
• /
• pp.165-169
• /
• 2014

An osteolytic lesion with a small central area of mineralization and sclerotic borders was discovered incidentally in the clivus on the cone-beam computed tomography (CBCT) of a 27-year-old male patient. This benign appearance indicated a primary differential diagnosis of non-aggressive lesions such as fibro-osseous lesions and arrested pneumatization. Further, on magnetic resonance imaging (MRI), the lesion showed a homogenously low T1 signal intensity with mild internal enhancement after post-gadolinium and a heterogeneous T2 signal intensity. These signal characteristics might be attributed to the fibrous tissues, chondroid matrix, calcific material, or cystic component of the lesion; thus, chondroblastoma and chondromyxoid fibroma were added to the differential diagnosis. Although this report was limited by the lack of final diagnosis and the patient lost to follow-up, the incidental skull base finding would be important for interpreting the entire volume of CBCT by a qualified oral and maxillofacial radiologist.

• Journal of Oral Medicine and Pain
• /
• v.44 no.4
• /
• pp.154-159
• /
• 2019

Purpose: The aim of this study was to assess the change in thickness of the roof of the glenoid fossa (RGF) in patients undergoing orthognathic surgery using cone-beam computed tomography (CBCT) images. Methods: This retrospective study measured the thickness of the RGF in 19 patients (10 males, 9 females) who underwent orthognathic surgery at Chosun University Dental Hospital. The thickness of the RGF was measured perpendicularly between the 'glenoid fossa line' and 'middle cranial fossa line' on parasagittal and paracoronal reconstructions. Results: The mean RGF thickness increased from 0.83±0.44 mm to 0.86±0.46 mm after surgery. The average change in thickness of the RGF was 0.17±0.18 mm. The thickness of the RGF in the temporomandibular joint (TMJ) showed no significant difference by sex, and the change in thickness of the TMJ did not vary by surgical method. Conclusions: We found that the thickness of the RGF increased after orthognathic surgery, as revealed by CBCT. Further studies including larger numbers of subjects and long-term follow-up are needed to confirm the results of this study.

• Imaging Science in Dentistry
• /
• v.48 no.3
• /
• pp.191-199
• /
• 2018

Purpose: This study classified alveolar arch forms and evaluated differences in alveolar bone thickness among arch forms in the anterior esthetic region using cone-beam computed tomography (CBCT) images. Materials and Methods: Axial views of 113 CBCT images were assessed at the level of 3 mm below the cementoenamel junction (CEJ) of the right and left canines. The root center points of teeth in the anterior esthetic region were used as reference points. Arch forms were classified according to their transverse dimensions and the intercanine width-to-depth ratio. The buccolingual alveolar bone thickness of each tooth was measured at 3 mm below the CEJ and at the mid-root level. Differences in the mean thicknesses among arch forms were analyzed. Results: Anterior maxillary arches could be classified as long narrow, short medium, long medium, and long wide arches. Significant differences in buccolingual alveolar bone thickness among the arch groups were found at both levels. The long wide arches presented the greatest bone thickness, followed by the long medium arches, while the long narrow and short medium arches were the thinnest. Conclusion: Arch forms were classified as long narrow, short medium, long medium, and long wide. The buccolingual alveolar bone thickness exhibited significant differences among the arch forms.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.141-144
• /
• 2016

The aim of this report is to present two cases of canalis basilaris medianus as identified on cone-beam computed tomography (CBCT) in the base of the skull. The CBCT data sets were sent for radiographic consultation. In both cases, multi-planar views revealed an osseous defect in the base of the skull in the clivus region, the sagittal view showed a unilateral, well-defined, non-corticated, track-like low-attenuation osseous defect in the clivus. The appearance of the defect was highly reminiscent of a fracture of the clivus. The borders of osseous defect were smooth, and no other radiographic signs suggestive of osteolytic destructive processes were noted. Based on the overall radiographic examination, a radiographic impression of canalis basilaris medianus was made. Canalis basilaris medianus is a rare anatomical variant and is generally observed on the clivus. Due to its potential association with meningitis, it should be recognized and reported to avoid potential complications.