• 한국화재소방학회논문지
• /
• 제20권4호
• /
• pp.33-41
• /
• 2006

국내에서는 현재 샌드위치패널의 화재안전성능 평가를 위하여 KS F 2271(건축물의 내장재료 및 구조의 난연성 시험방법)을 사용하고 있다. 국내와 동일한 시험방법을 사용하고 있던 일본에서는 2000년 건축기준법 개정시 ISO 5660-1 시험방법을 내장재의 연소성능시험으로 채택하였다. 그에 따라 국내에서도 KS F 2271 시험방법을 보완하는 건축법 개정고시(안)을 예고하였고, 그 내용은 ISO 5660-1(Cone Calorimeter Method) 시험방법을 도입하는 것으로 알려져 있다. 본 연구에서는 샌드위치패널의 연소특성을 ISO 5660-1 콘칼로리미터 시험방법을 사용하여 검토하였다. 국내에서 일반적으로 사용되는 4종의 샌드위치패널과 4종의 심재(단열재)의 착화시간, 최대열방출율, 총 열방출량을 검토하였으며, 시험체별 시험결과를 분석하였다. 최종적으로 일본과 NBC개정안에서 제시하는 분류기준에 시험결과를 적용하였다.

• Geomechanics and Engineering
• /
• 제7권4호
• /
• pp.459-475
• /
• 2014

In this study, a CPT-based p-y analysis method was proposed for the displacement analysis of laterally loaded piles. Key consideration was the continuous soil profiling capability of CPT and cone resistance profiles that do not require artificial assumption or simplification for input parameter selection. The focus is on the application into offshore mono-piles embedded in clays. The correlations of p-y function components to the effective cone resistance were proposed, which can fully utilize CPT measurements. A case example was selected from the literature and used to validate the proposed method. Various parametric studies were performed to examine the effectiveness of the proposed method and investigate the effect of property profile and its depth resolution on the p-y analysis. It was found that the calculation could be largely misleading if wrongly interpreted sub-layer condition or inappropriate resolution of input soil profile was involved in the analyses. It was also found that there is a significant influence depth that dominates overall load response of pile. The soil profile and properties within this depth range affect most significantly calculated load responses, confirming that the soil profile within this depth range should be identified in more detail.

• 한국화재소방학회논문지
• /
• 제20권4호
• /
• pp.110-115
• /
• 2006

폴리우레탄에 인계 화합물을 첨가하여 폴리우레탄폼을 제조하였으며, 인계 화합물이 제조된 폴리우레탄폼의 기계적 물성과 난연성에 미치는 영향에 대하여 고찰하였다. 폴리우레탄과 인계 난연제인 Tri(chloroisopropyl) phosphate(TCPP), Triethyl phosphate(TEP), Trimethyl phosphate(TMP) 각각을 약 $90^{\circ}C$에서 혼합시켜 혼합물로부터 제조된 경질 폴리우레탄폼에 대한 여러 실험을 통하여 기계적 물성뿐만 아니라 난연 효과도 상당히 향상됨을 확인하였다. Cone calorimeter를 이용하여 열방출율(heat release rate, HRR)을 측정하여 난연 첨가제의 함량에 따른 재료별 난연 특성을 평가하였다. 그리고 Scanning Electron Microscope(SEM)을 사용하여 난연제를 첨가하여 만든 폴리우레탄폼의 morphology를 관찰한 결과 순수한 폼과 마찬가지로 매우 균일한 형태의 cell 분포를 가짐을 확인하였다.

• 대한수학회보
• /
• 제47권6호
• /
• pp.1275-1283
• /
• 2010

If the Wiener-Hopf $C^*$-algebra W(G,M) for a discrete group G with a semigroup M has the uniqueness property, then the structure of it is to some extent independent of the choice of isometries on a Hilbert space. In this paper we show that if the Wiener-Hopf $C^*$-algebra W(G,M) of a partially ordered group G with the positive cone M has the uniqueness property, then (G,M) is weakly unperforated. We also prove that the Wiener-Hopf $C^*$-algebra W($\mathbb{Z}$, M) of subsemigroup generating the integer group $\mathbb{Z}$ is isomorphic to the Toeplitz algebra, but W($\mathbb{Z}$, M) does not have the uniqueness property except the case M = $\mathbb{N}$.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.228-233
• /
• 2016

Auxetic material is a material which has negative Poisson's ratio(NPR). Auxetic material shows some distinctive property like high energy absorbing property and high shear modulus. Among these, synclastic curvature is very interesting characteristic. When synclastic-curvature-material bends, it changes its shape like dome, contrary to non-auxetic material which changes its shape like saddle(anticlastic). This distinctive property could make it easy to manufacture curved structure like nose cone or wing panel in aerospace engineering. In this study, we studied a quantitative analysis about synclastic curvature of re-entrant panel with finite element model. We suggested a concept 'Degree of Synclasticity(DOS)', which means a ratio of curvature of load-direction and load-orthogonal direction. We studied the variation of DOS with two factor, unit cell inner angle(${\theta}$) and load position angle(${\phi}$). DOS decreases as ${\theta}$ increases because the unit cell goes out of auxetic-shape. As ${\phi}$ varies, DOS changes in a large range. So proper optimization of ${\phi}$ would be needed for application.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2661-2665
• /
• 2011

In order to evaluate the structural integrity of a GFRP composite bogie frame due to flying railway ballast, the low velocity impact test and compressive test after impact was conducted for glass fiber/epoxy 4-harness satin woven laminate composites applied to skin part of a bogie frame. The impact test was performed using a instrumented impact testing system with energy levels of 5J, 10J and 20J and the designed impactor based on typical railway ballast shapes such as sphere, cube and cone to simulate the ballasted track environments. The compressive strength was tested to according to ASTM D7137 to evaluate the degradation of mechanical property of impact damaged laminate composites. The results showed that the damage area and the degradation of compressive strength after impact for laminate composites was increased with increase in impact energy for all ballast shapes and was particularly most influenced by cone ballast shape.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.21-29
• /
• 2013

PURPOSES: Simulation of aggregate slump test using equivalent sphere particle in DEM and its validity evaluation against lab aggregate slump test METHODS : In this research, aggregate slump tests are performed and compared with DEM simulation. To utilize spheric particles in YADE, equivalent sphere diameter concept is applied. As verification measures, the volume in slump cone filled with aggregate is used and it is compared with volume in slump cone filled with equivalent sphere particle. Slump height and diameter are also used to evaluate the suggested numerical method with equivalent concept RESULTS : Simulation test results show good agrement with lab test results in terms of loose packing volume, height and diameter of slumped particle clump. CONCLUSIONS : It is concluded that numerical simulation using DEM is applicable to evaluate the effect of aggregate morphological property in loose packing and optimum gradation determination based on the aggregate slump test simulation result.

• Elastomers and Composites
• /
• 제39권2호
• /
• pp.105-120
• /
• 2004

본 연구에서는 금속수산화물과 다양한 인계 난연제를 포함한 난연 acrylonitrile-butadiene rubber (NBR) 발포체를 제조하고, 이때 인 함유량에 따른 열적특성. 난연특성, 발포특성 등의 변화 및 이들의 상관관계를 조사하였다. NBR 발포체의 발포특성 및 모폴로지 분석 결과 인/질소계 난연제 10 phr 범위 내에서 대체적으로 인/질소계 난연제를 투입하지 않은 금속수산화물만을 사용한 경우와 유사한 발포특성 및 모폴로지를 가짐을 알 수 있었다. 열 분석에서는 인 함유량이 많은 인/질소계 난연제를 사용할 경우 화염분위기 하에서의 char 형성과 관련한 잔류량이 많아짐으로써 난연성이 향상됨을, LOI 분석에서도 인 함유량이 증가함에 따라 LOI가 증가함을 알 수 있었다. cone-calorimeter 분석 결과 열 및 LOI 분석 결과와 유사한 경향성을, 인 함유량이 증가함에 따라 HRR, THR, EHC 등이 감소하는 반면에 COY는 증가함을, 즉 난연성이 상승함을 확인할 수 있었다. 연기밀도 분석 결과 cone-calorimeter 분석에서의 (A)-COY와 같은 경향성을 보여주었다.

• Kyungpook Mathematical Journal
• /
• 제61권3호
• /
• pp.613-629
• /
• 2021

In this paper, we present and prove new existence and uniqueness fixed point theorems for vector operators having a mixed monotone property in partially ordered product Banach spaces. Our results extend and improve existing works on τ-φ-concave operators in the scalar case. As an application, we study the existence and uniqueness of positive solutions for systems of nonlinear Neumann boundary value problems.

• Korean Journal of Mathematics
• /
• 제31권4호
• /
• pp.495-504
• /
• 2023

This article deals with non-degenerate linear transformations on Euclidean Jordan algebras. First, we study non-degenerate for cone invariant, copositive, Lyapunov-like, and relaxation transformations. Further, we study that the non-degenerate is invariant under principal pivotal transformations and algebraic automorphisms.