• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.570-593
• /
• 1996

This study was intended to perform the influence of condyle positional change after surgical correction of skeletal Class III malocclusion after BSSRO in 20 patients(males 9, females 11) using computed tomogram that were taken in centric occlusion before, immediate, and long term after surgery and lateral cephalogram that were taken in centric occlusion before, 7 days within the period intermaxillary fixation, 24hour after removing intermaxillary fixation and long term after surgery. 1. Mean intercondylar distance was $84.45{\pm}4.01mm$ and horizontal long axis of condylar angle was $11.89{\pm}5.19^{\circ}$on right, $11.65{\pm}2.09^{\circ}$on left side and condylar lateral poles were located about 12mm and medial poles about 7mm from reference line(AA') on the axial tomograph. Mean intercondylar distance was $84.43{\pm}3.96mm$ and vertical axis angle of condylar angle was $78.72{\pm}3.43^{\circ}$on right, $78.09{\pm}6.12^{\circ}$on left. 2. No statistical significance was found on the condylar change(T2C-T1C) but it had definitive increasing tendency. There was significant decreasing of the distance between both condylar pole and the AA'(p<0.05) during the long term(TLC-T2C). 3. On the lateral cephalogram, no statistical significance was found between immediate after surgery and 24 hours after the removing of intermaxillary fixation but only the lower incisor tip moved forward about 0.33mm(p<0.05). Considering individual relapse rate, mean relapse rate was 1.2% on L1, 5.0% on B, 2.0% on Pog, 9.1% on Gn, 10.3% on Me(p<0.05). 4. There was statistical significance on the influence of the mandibular set-back to the total mandibular relapse(p<0.05). 5. There was no statistical significance on the influence of the mandibular set-back(T2-T1) to the condylar change(T2C-T1C), the condylar change(T2C-T1C, TLC-T2C) to the mandibular total relapse, the pre-operative condylar position to the condylar change(T2C-T1C, TLC-T2C), the pre-operative mandibular posture to the condylar change(T2C-T1C, TLC-T2C)(p>0.05). 6. The result of multiple regression analysis on the influence of the pre-operative condylar position to the total mandibular relapse revealed that the more increasing of intercondylar distance and condylar vertical axis angle and decreasing of condyalr head long axis angle, the more increasing of mandibular horizontal relapse(L1,B,Pog,Gn,Me) on the right side condyle. The same result was founded in the case of horizontal relapse(L1,Me) on the left side condyle.(p<0.05). 7. The result of multiple regression analysis on the influence of the pre-operative condylar position to the pre-operative mandibular posture revealed that the more increasing of intercondylar distance and condylar vertical axis angle and decreasing of condylar head long axis angle, the more increasing of mandibular vertical length on the right side condyle. and increasing of vertical lengh & prognathism on the left side condyle(p<0.05). 8. The result of simple regression analysis on the influence of the pre-operative mandibular posture to the mandibular total relapse revealed that the more increasing of prognathism, the more increasing of mandibular total relapse in B and the more increasing of over-jet the more increasing of mandibular total relapse(p<0.05). Consequently, surgical mandibular repositioning was not significantly influenced to the change of condylar position with condylar reposition method.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.239-249
• /
• 2010

Objective: The aim of this study was to identify the expression of nitric oxide synthases (NOS) in the mandibular condyle during mandible advancement by functional appliance and to correlate it with the histologic changes and bone remodeling. Methods: Twenty-four female, 35-day-old Sprague-Dawley rats were randomly divided into 3 experimental groups. In all experimental groups, the mandibles of the rats were kept in a continuous forward position with a fixed bite jumping appliance. The rats were sacrificed on the 3rd, 14th, and 30th days of experiment. More than 2 rats in each group were used for staining. Results: There were no remarkable histologic changes and NOS expression differences in the control group. The most prominent histologic changes occurred in the 14th day experimental group. NOS decreased in the 30th day experimental group. There was increased expression of $NOS_2$ and $NOS_3$ in all experimental groups, comparative to the control group. In all the experimental groups and control group, the expression of $NOS_2$ was greater than that of $NOS_3$. Conclusions: It is postulated that $NOS_2$ and $NOS_3$ in the mandibular condyle might play an important role in bone remodelling of the mandibular condyle.

• Journal of Oral Medicine and Pain
• /
• v.38 no.2
• /
• pp.149-159
• /
• 2013

The purpose of this study was to investigate the relationship between horizontal morphology of lateral pterygoid muscle and onset of temporomandibular joint disorders. Randomly selected 150 subjects, assigned with equal number in terms of gender and age group, were included. The axial and sagittal images in their magnetic resonance images of the temporomandibular joints were used to measure the morphologic characteristics of lateral pterygoid muscles and temporomandibular joints. The measurement variables were maximal horizontal width and insertion angle to the condyle, position of the articular disc, condylar deformity, and joint effusion. In addition, presence or absence of the temporomandibular joint pain was examined through history and palpation of the joints. The relationships among measurement variables were analyzed and the results were as follow. The insertion angle of the lateral pterygoid muscle to the condyle was higher in the joint of anterior disc displacement without reduction than that in the joint of normal disc position. In addition, the maximal horizontal width of the lateral pterygoid muscle was significantly increased in joints with pain than those without pain. Also, the insertion angle was significantly higher in younger age group and the maximal width was significantly greater in male than in female. These results suggest that high insertion angle of lateral pterygoid muscle might be an important anatomic predisposing factor for anterior disc displacement in temporomandibular joint and muscular activity of lateral pterygoid muscle might be affected by preauricular pain. In conclusion, there might be a bi-directional interaction between lateral pterygoid muscle and joint in the progression of anterior disc displacement in temporomandibular joint.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.2
• /
• pp.90-93
• /
• 2015

The fibula free flap has now become the most reliable and frequently used option for mandible reconstruction. Recently, three dimensional images and printing technologies are applied to mandibular reconstruction. We introduce our recent experience of mandibular reconstruction using three dimensionally planned fibula free flap in a patient with gunshot injury. The defect was virtually reconstructed with three-dimensional image. Because bone fragments are dislocated from original position, relocation was necessary. Fragments are virtually relocated to original position using mirror image of unaffected right side of the mandible. A medical rapid prototyping (MRP) model and cutting guide was made with 3D printer. Titanium reconstruction plate was adapted to the MRP model manually. 7 cm-sized fibula bone flap was designed on left lower leg. After dissection, proximal and distal margin of fibula flap was osteotomized by using three dimensional cutting guide. Segmentation was also done as planned. The fibula bone flap was attached to the inner side of the prebent reconstruction plate and fixed with screws. Postoperative evaluation was done by comparison between preoperative planning and surgical outcome. Although dislocated condyle is still not in ideal position, we can see that reconstruction was done as planned.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.3
• /
• pp.204-210
• /
• 2007

This study was intended to compare the cranial base morphology between the mandibular prognathism and maxillary retrognathism in skeletal class III patients. The subject of the present study was composed of 88 patients divided into two groups; Group 1 (Skeletal Class III with mandibular prognathism. SNA within normal range, SNB over normal range, n=54) and Group 2(Skeletal Class III with maxillary retrognathism. SNA below normal range, SNB within normal range, n=34). Lateral cephalogram were taken immediate before surgery and 18 landmarks were used to analyze the characteristics of cranial base and maxillomandibular skeleton. The result revealed that cranial base angle is significantly smaller in Group 1 than Group 2, which implies the influence of the cranial base angulation on the mandibular position. However the posterior cranial base length did not influence the mandibular horizontal position and anterior cranial base length did not influence the maxillary horizontal position. As the anterior cranial base length was closely related with ramal height, it is recommendable to investigate the regulatory mechanism of chondrogenesis of cranial base and condyle cartilage in the future research.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.80-87
• /
• 2020

Purpose: This study aims to measure the mandibular movement using JT-3D system and provide a range of mandibular movement that can serve as a good reference for diagnosing the temporomandibular disorder. Materials and Methods: This study was conducted in 60 young male and female adults. The maximum opening and closing movement was recorded using JT-3D system, and by regarding 5 times of repetitive movement as 1 cycle of movement, total 3 cycles of movement were recorded. During the maximum opening, vertical position of lower jaw, antero-posterior position, lateral deflection position, and maximum opening distance were recorded. To evaluate the reproducibility of JT-3D system, statistical analysis were conducted (α = 0.05). Results: During the maximum opening, the average value appeared at 31.56 mm vertically and 24.42 mm rearwardly, lateral deflection position 0.72 mm, and maximum opening distance 40.32 mm. There was no statistical significance in all measured values for three cycles of movement recorded with JT-3D system (P > 0.05). Conclusion: During the maximum opening, the average value appeared at 0.72 mm in lateral deflection position and the maximum opening distance at 40.32 mm, and the analysis on the maximum opening of lower jaw using JT-3D system showed sufficiently reproducible results.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.17 no.1
• /
• pp.223-232
• /
• 1987

The author obtained the transcranial-oblique lateral radiograms from 78 patients(26 male, 52 female) with temporomandibular dysfunction problem. And then, the author analyzed the dimensional changes of the TMJ space on centric occlusion, horizontal condylar movement and antero-posterior positional relationship of condyle to the articular eminence on 2.54㎝ mouth opening with clicking, TMJ pain and mouth opening limitation repectively, which were the symptoms of the temporomandibular joint pain dysfunction problem, and compared these data with control group. The results were as follows: 1. In centric occlusion, anterior and posterior TMJ space of experimental group was slightly lesser than those of the control group, also superior TMJ space of experimental group was significantly lesser than that of the control group. (p<0.01) 2. In 2.54㎝ mouth opening, the condylar horizontal movement and the antero-posterior positional relationship to the articular eminence were significantly lesser than those of the control group. (p<0.01) 3. Examined experimental group, the degree of condylar horizontal movement of affected ide was lesser than that of the normal side in 2.54㎝ mouth opening.

• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.211-220
• /
• 2004

It is well known that the geometry of the articular surface has a major role in determining the position of articular contact and the lines of action for the contact forces. The contact force calculation of the knee joint under the effect of sliding and rolling is one of the most challenging issues in this field. We present a 3-D human knee joint model including sliding and rolling motions and major ligaments to calculate the lateral and medial condyle contact forces from the recovered total internal reaction force using inverse dynamic contact modeling and the Least-Square method. As results, it is believed that the patella, muscles and tendon affect a lot for the internal reaction forces at the initial heel contact stage. With increasing flexion angles during gait, the decreasing contact area is progressively shifted to the posterior direction on the tibia plateau. In addition, the medial side contact force is larger than the lateral side contact force in the knee joint during normal human walking. The total internal forces of the knee joint are reasonable compared to previous studies.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.1
• /
• pp.56-59
• /
• 2005

Trans-posterior septal posterior arthroscopic portals are useful in performing arthroscopic diagnosis and treatment of the lesions located in posterior aspect of knee joints. Except inferior surface of posterior horn of lateral meniscus, we easily observed entire lateral compartment, especially inferior surface of anterior horn and lateral tibial condyle by figure of 4 position through posteromedial trans-posterior septal arthroscopic portal. And it was possible to obtain visual field from posterior aspect and we could use anteromedial and anterolateral portals for instrumentation without clouding. So, this procedure may be useful in performing surgery of lateral compartment especially, anterior aspect in the knee joints.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.21.1-21.8
• /
• 2015

Computer Assisted Simulation Surgery (CASS) is a reliable method that permits oral and maxillofacial surgeons to visualize the position of the maxilla and the mandible as observed in the patient. The purpose of this report was to introduce a newly developed strategy for proximal segment management according to Balanced Orthognathic Surgery (BOS) protocol which is a type of CASS, and to establish the clinical feasibility of the BOS protocol in the treatment of complex maxillo-facial deformities. The BOS protocol consists of the following 4 phases: 1) Planning and simulation phase, 2) Modeling phase, 3) Surgical phase, and 4) Evaluation phase. The surgical interventions in 80 consecutive patients were planned and executed by the BOS protocol. The BOS protocol ensures accuracy during surgery, thereby facilitating the completion of procedures without any complications. The BOS protocol may be a complete solution that enables an orthognatic surgeon to perform accurate surgery based on a surgical plan, making real outcomes as close to pre-planned outcomes as possible.