• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권2호
• /
• pp.162-167
• /
• 2010

This is a case report about patient who had suffered from degenerative joint disease and treated by TMJ reconstruction with condylar prosthesis. The patient visited Korea University An-am hospital on 2007 complaining symptom about both TMJ pain, mouth opening limitation and open bite. From CT view there was severe resorption of both condylar head, therefore condylar prosthesis reconstruction was planned. After 3D RP model analysis for preparation, the patient was operated under general anesthesia for condylar prosthesis reconstruction and the symptom was alleviated. (increased mouth opening, reduced anterior open bite, full mouth occlusal contact achieved) Follow up was carried out monthly, but after this, patient refused follow up. After 26 months from the operation, the patient revisited for anterior open bite. In clinical evaluation, occlusal contact was remained, but anterior open bite was relapsed. From cephalometry analysis, severe resorption of glenoid fossa was found. Therefore, Autogenous disc reconstruction with alloplastic material was planned on August 2009. After another surgery, condylar prosthesis was regained its normal position in glenoid fossa, and occlusion was recovered properly.

• 구강회복응용과학지
• /
• 제17권2호
• /
• pp.113-123
• /
• 2001

The success of complete denture prosthesis is to satisfy three basic requirements for the edentulous patient : maximum comfort, efficiency, and esthetic appearance. This can be achieved only if the dentures are both stable and retentive. When the residual alveolar ridge has resorbed significantly, stability and retention are more dependent on the correct position of the teeth and external surfaces of the denture. The stability and retention of the denture can be improved by locating the denture in the neutral zone and reproducing exact mandibular border movement for balanced occlusion. The neutral zone philosophy is based upon the concept that there exists a specific area where the musculature function will not unseat the denture in the mouth. In here, forces generated by the tongue are neutralized by the forces generated by the lips and cheeks. One of the simplest methods for recording border movements in three dimensions is to make stereographic record of condylar movement. Stereographs are made in the mouth during mandibular movement with intraoral clutches and central bearing point, and used in dictating the condylar movement on the articulator later by generating the condylar paths in doughy acrylic resin. Its procedure is simpler and more convenient than that of Pantograph. In this clinical report, we introduce the concept of neutral zone and stereograph in complete denture fabrication.

• 대한치과의사협회지
• /
• 제50권5호
• /
• pp.256-261
• /
• 2012

Temporomandibular joint (TMJ) prosthesis have been hesitated to use because of bitter memories about Proplast-Teflon interpositional TMJ implants. Many clinicians, however, are trying to use total TMJ prosthesis with getting continuous long-term follow-up results. Alloplastic total TMJ replacement have been applied to much more patients who have failed previous TMJ prostheses or TMJ implants, fibrous/bony ankylosis, severe osteoarthritis, degenerative joint disease, idiopathic condylar resorption, condyle loss by trauma or tumor resection, and other bony destructive diseases. Nowadays three types of total TMJ prosthesis are widely used. In this article, indications, types of prosthesis, safety and stability would be demonstrated with a case report.

• 구강회복응용과학지
• /
• 제32권4호
• /
• pp.345-350
• /
• 2016

전악 재건이 필요한 환자의 진단 과정에서, 환자 고유의 하악 운동을 재현해 내기 위해 환자의 시상과로각과 전방 유도각을 교합기 상에 인기하는 것은 필수적이다. 이번 증례에서는 전악 수복이 필요한 환자에게서 ARCUS digma I system을 이용하여 환자 고유의 과로각 채득 후, 기능적으로 알맞은 전치 유도각을 설정하여 이를 바탕으로 교합 거상이 적용된 임시치아로 적응하도록 하였다. 그 후 ARCUS digma II system을 활용하여 교합기상에 최종 마운팅하여 보철물을 장착함으로써 심미적이면서도 환자의 고유 과로각에 알맞은 기능적 임상결과를 얻었을 뿐 아니라, 두 시스템간의 비교한 결과를 얻을 수 있었기에 이에 보고하고자 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제11권2호
• /
• pp.40-46
• /
• 1989

출생 전${\cdot}$후 악관절의 외상 또는 감염은 과두 성장을 방해하며 편측으로 발생하는 경우 하악골의 비대칭 성장을 초래하여 심한 안모 변형과 부정교합을 유발하거나 악관절 유착의 주된 원인이 된다. 역사적으로 관절 유착은 과두절단술에서부터 연골이식, 진피이식, 금속과두 이식, 관절 성형술, 관절과 이식물 삽입에 이르기까지 매우 다양한 방법에 의해 치료되어 왔으며 하악운동이 보장되고 정상적인 기능을 회복하는데는 어떤 술식이라도 만족스런 결과를 가져다줄 수 있다. 이에 저자는 편측성 악관절 강직증 및 비대칭 안모를 가진 환자에서 과두절제술 후 금속 과두이식을 이용한 악관절 재건과 하악 골체부 절단술 및 C-sliding 절단술, 하악지 수직 골절단술, Medpor를 이용한 증식술로 개구기능과 비대칭 안모를 개선하여 비교적 만족할 만한 결과를 얻었기에 그 치험례를 보고하는 바이다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권3호
• /
• pp.163-168
• /
• 2003

Three-dimensional solid model has not been widely used in surgical prediction of orthognathic surgery because frequent artifacts from occlusal restorations or prosthesis limited the usefulness of simulated surgery involving occlusion. We prepared three-dimensional(3D) solid model from CT data and integrated the 3D solid model with dental cast using a face-bow transfer technique combined with skeletal reference measurement and confirmation with cephalometric radiographs. With this simple and easy method, it was possible to predict bony interference between the proximal and distal segment of the mandible so that we can prevent condylar displacement after sagittal split ramus osteotomy of the mandible with prominent asymmetry. The method error was within 2mm and it seemed to be useful in preoperative planning for maxillofacial surgery with maxillo-mandibular occlusal change.

• 구강회복응용과학지
• /
• 제38권4호
• /
• pp.249-256
• /
• 2022

성공적인 상악전치부의 임플란트 식립은 많은 고려를 필요로 한다. 환자를 만족시키며 기능적이며 심미적인 보철수복을 위해서는, 치료에 앞서 정확한 진단이 선행되어야 하며 이는 구내스캔, 콘빔시티, 그리고 안면스캔을 중첩함으로 시도해 볼 수 있다. 구내스캔을 통해 얻어지는 환자의 교합양상과 콘빔시티에서 얻어지는 환자의 치조골의 양상 및 질, 그리고 안면스캔에서 얻어지는 환자의 특성과 구외평가를 어우르는 진단은 보다 성공적인 보철수복을 위한 발판이 될 수 있다. 다양한 정보의 중첩을 통해, 보철적으로 이상적인 치관의 위치를 우선순위에 두지만, 환자의 생물학적 한계를 포용하는 "탑다운"형식의 임플란트 진단은, 이를 고려한 서지컬 가이드를 3D 프린팅하고, 수술에 사용함으로써 구현되었다. 환자의 치조골 소실로 인한 임플란트 식립위치의 한계점은, 치아의 선각과 착시효과를 이용한 보철수복을 통하여 극복하려고 노력하였다. 이후, 임시수복물을 사용하고 환자가 가장 편하다고 느끼는 보철물을 장착한 뒤 디지털 교합장비(Arcus Digma II)를 이용하여 전방유도와 하악의 운동을 측정하여 이를 최종보철물에 적용하였다.

• 대한치과보철학회지
• /
• 제61권1호
• /
• pp.33-43
• /
• 2023

전체 치열에 걸쳐 나타나는 병적 마모는 교합 평면의 붕괴, 수직고경의 감소, 전치부 조기 접촉, 부적절한 전방유도 및 치아 이동의 문제를 야기하여, 측두하악관절 장애 및 저작 효율의 감소, 치아 과민반응 등의 증상을 유발한다. 과도한 치아 마모(wear)를 보이는 환자의 치료를 위해서는 원인에 대한 분석과 함께 수직고경 변화에 대한 평가가 선행되어야 한다. 본 증례의 환자는 45세 여성으로 악교정수술 병력이 있었으며, 임상 검사, 방사선 검사, 모형 분석을 통해 전반적인 치아의 마모, 상악 전치부의 치간 이개, 하악 과두의 후방위, 보철 수복을 위한 악간 공간 부족을 확인하였다. 수직고경 거상을 동반한 전악구강회복술을 계획하였으며, 가철성 교합 안정장치 및 임시보철물로 새로운 수직고경에 대한 환자의 적응을 평가하였고, 적응된 수직고경을 유지하기 위해 임시 수복물을 기준으로 교차 마운팅을 시행해 최종 지르코니아 보철물을 제작하였다. 교합 관계의 안정적인 회복을 통해 기능 및 심미적으로 만족할 만한 결과를 보였다.

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.203-244
• /
• 1998

The human mandible is always under the condition of loading by the various forces extorted by the attached muscles. The loading is an important condition of the stomatognathic system. This condition is composed of the direction and amount of forces of the masticatory muscles, which are controlled by the neuromuscular system, and always influenced by the movement of both opening and closing. Mandible is a strong foundation for the teeth or various prostheses, nevetheless it is a elastic body which accompanies deformation by the external forces on it. The elastic properties of the mandible is influenced by the various procedures such as conventional restorative treatments, osseointegrated implant treatments, reconstructive surgical procedures and so forth. Among the treatments the osseointegrated implant has no periodontal ligaments, which exist around the natural teeth to allow physiologic mobility in the alveolar socket. And so around the osseointegrated implant, there is almost no damping effect during the transmission of occlusal stress and displacements. If the osseointegrated implants are connected by the superstructure for the stabilization and effective distribution of occlusal stresses, the elastic properties of mandible is restricted according to the extent of 'splinting' by the superstructure and implants. To investigate the change of elastic behaviour of the mandible which has osseointegrated implant prosthesis of various numbers of implant installment and span of superstructre, a three dimensional finite element model was developed and analyzed with conditions mentioned above. The conclusions are as follows : 1. The displacements are primarily developed at the area of muscle attachment and distributed all around the mandible according to the various properties of bone. 2. The segmentation in the superstructure has few influence on the distribution of stress and displacement. 3. In the load case of ICP, the concentration of tensional stress was observed at the anterior portion of the ramus($9.22E+6N/m^2$) and at the lingual portion of the symphysis menti($8.36E+6N/m^2$). 4. In the load case of INC, the concentration of tensional stress was observed at the anterior portion of the ramus($9.90E+6N/m^2$) and the concentration of tensional stress was observed at the lingual portion of the symphysis menti($2.38E+6N/m^2$)). 5. In the load case of UTCP, the relatively high concentration of tensional stress($3.66E+7N/m^2$) was observed at the internal surface of the condylar neck.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.133-147
• /
• 2000

A well-planned, precise occlusal adjustment of natural teeth has some distinct advantages over other forms of occlusal therapy. It should be emphasized, however, that an occlusal adjustment is an irreversible procedure and has definite contraindications in some mouths. Generally, the treatment methods for the patients that has open-bite will be following as below. : (1) Use of removable orthopedic repositioning appliance, (2) Orthodontics, (3) Full or partial reconstruction of the dentition, (4) Orthognathic surgical procedure, (5) Occlusal adjustment of the existing natural teeth, (6) Any combination of the above. Above all, the advantages of occlusal adjustment of natural teeth are : (1) the patient is more able to adapt to the changes in jaw position and posture; (2) the phonetic or speaking ability of the patient is not significantly changed and usually is improved; (3) the esthetics of the natural teeth is not altered and often is better; (4) the hygiene of the individual teeth is easily maintained; and (5) the functional usage of the teeth as cutting and chewing devices is markedly improved. The objective of an occlusal adjustment, as with any form of occlusal therapy, is to correct or remove the occlusal interferences, or premature contacts, on the occluding parts of the teeth which prevent a centric relation closure of the mandible. A systematic, disciplined approach can be followed in treatment, the objectives should be listed. They are : (1) Centric relation occlusion of the posterior teeth. (2) Proper "coupling" of the anterior teeth. (3) An acceptable disclusive angle of the anterior teeth in harmony with the condylar movement patterns. (4) Stability of the corrected occlusion. (5) Resolution of the related symptoms. For the patient with open-bite on anterior and posterior teeth, this case report shows the treatment methods in combination the fixed prosthesis with the selective cutting of the natural teeth. Occlusal adjustment is no longer an elective procedure but a mandatory one for patients requiring restorations and those in treatment for TMD dysfunctions or those whose dentitions show signs of occlusal trauma. Occlusal adjustment is essential for all who do not display the above lists.