• 제목/요약/키워드: Conductive Alloy

검색결과 43건 처리시간 0.016초

전기폭발법에 의한 CU/CUO 나노분말의 제조 및 분말특성 (Synthesis and Characteristics of CU/CUO Nanopowders by Pulsed Wire Evaporativn(PWE) Method)

  • 맹덕영;이창규;이남희;박중학;김흥회;이은구
    • 한국재료학회지
    • /
    • 제12권12호
    • /
    • pp.941-946
    • /
    • 2002
  • Both Cu and Cu-oxide nanopowders have great potential as conductive paste, solid lubricant, effective catalysts and super conducting materials because of their unique properties compared with those of commercial micro-sized ones. In this study, Cu and Cu-oxide nanopowders were prepared by Pulsed Wire Evaporation (PWE) method which has been very useful for producing nanometer-sized metal, alloy and ceramic powders. In this process, the metal wire is explosively converted into ultrafine particles under high electric pulse current (between $10^4$ and $10^{ 6}$ $A/mm^2$) within a micro second time. To prevent full oxidations of Cu powder, the surface of powder has been slightly passivated with thin CuO layer. X-ray diffraction analysis has shown that pure Cu nanopowders were obtained at $N_2$ atmosphere. As the oxygen partial pressure increased in $N_2$ atmosphere, the gradual phase transformation occurred from Cu to $Cu_2$O and finally CuO nanopowders. The spherical Cu nanopowders had a uniform size distribution of about 100nm in diameter. The Cu-oxide nanopowders were less than 70nm with sphere-like shape and their mean particle size was 54nm. Smaller size of Cu-oxide nanopowders compared with that of the Cu nanopowders results from the secondary explosion of Cu nanopowders at oxygen atmosphere. Thin passivated oxygen layer on the Cu surface has been proved by XPS and HRPD.

DSI 성형을 이용한 금속/플라스틱 복합 부품 제조에 관한 연구 (A study on the manufacturing of metal/plastic multi-components using the DSI molding)

  • 하석재;차백순;고영배
    • Design & Manufacturing
    • /
    • 제14권4호
    • /
    • pp.71-77
    • /
    • 2020
  • Various manufacturing technologies, including over-molding and insert-injection molding, are used to produce hybrid plastics and metals. However, there are disadvantages to these technologies, as they require several steps in manufacturing and are limited to what can be reasonably achieved within the complexities of part geometry. This study aims to determine a practical approach for producing metal/plastic hybrid components by combining plastic injection molding and metal die casting to create a new hybrid metal/plastic molding process. The integrated metal/plastic hybrid injection molding process developed in this study uses the proven method of multi-component technology as a basis to combine plastic injection molding with metal die casting into one integrated process. In this study, the electrical conductivity and ampacity were verified to qualify the new process for the production of parts used in electronic devices. The electrical conductivity was measured, contacting both sides of the test sample with constant pressure, and the resistivity was measured using a micro ohmmeter. Also, the specific conductivity was subsequently calculated from the resistivity and contact surface of the conductor path. The ampacity defines the maximum amount of current a conductive path can carry before sustaining immediate or progressive deterioration. The manufactured hybrid multi-components were loaded with increasing currents, while the temperature was recorded with an infrared camera. To compare the measured infrared images, an electro-thermal simulation was conducted using commercial CAE software to predict the maximum temperature of the power loaded parts. Overall, during the injection molding process, it was demonstrated that multifunctional parts can be produced for electric and electronic applications.

Zn-Al 합금 선재를 이용한 금속용사 공법 적용 콘크리트의 전자파 차폐 성능 평가에 관한 실험적 연구 (An Experimental Study on the Evaluation of EMP Shielding Performance of Concrete Applied with ATMSM Using Zn-Al Alloy Wire)

  • 최현준;박진호;민태범;장현오;이한승
    • 한국건축시공학회지
    • /
    • 제19권3호
    • /
    • pp.209-217
    • /
    • 2019
  • EMP(Electromagnetic Pulse)는 통상적으로 고출력 전자기파 (High Power Electromagnetic: HPEM)를 의미한다. EMP를 차폐하기 위한 차폐 판의 경우, 현장 적용 시, 용접 및 볼트의 연결부(접합부)에서 시공자의 숙련도 및 불량시공, 차폐판의 변형 등으로 인한 전자파 차폐성능 저하의 가능성을 유발하고 있으며, 또한 벽체로부터 이격거리로 인한 비효율적인 공간 활용이 문제점으로 지적 되고 있다. 따라서, 본 연구는 콘크리트 벽체를 대상으로 반사손실에 대한 전자파 차폐성능을 확보하기 위한 일환으로서, 콘크리트에 금속용사 공법을 적용하여 최적의 전자파 차폐 조건을 도출하고자 한다. 실험변수로는 콘크리트 벽체 두께, Zn-Al 금속용사 적용 유무이다. 콘크리트 벽체의 경우, 일반적으로 적용되어지고 있는 벽체 두께인 100~300mm이며, 또한 전자파 차폐성능에 관한 Zn-Al 금속용사 공법의 실효성을 평가하기 위해 적용 유무로 구분하여 실험변수를 설정하였다. 실험 결과 두께가 증가할수록 흡수 손실의 증가로 인해 전자파 차폐성능이 증가하였다. 또한 Zn-Al 금속용사 적용 후 모든 시험체에서 평균 56.68 dB의 상당한 차폐성능 증가를 보였으며, 이는 금속용사 피막의 반사손실에 의하여 증가된 것으로 판단된다. 또한, 전도성 혼입재료와 금속 용사 피막을 동시에 적용할 경우 보다 우수한 차폐성능을 나타낼 것으로 판단된다.