• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.1035-1052
• /
• 2019

Recently, as the demand for immersive videos increases, efficient video processing techniques for omnidirectional immersive video is actively developed by MPEG-I. While the omnidirectional video provides a larger degree of freedom for a free viewpoint, the size of the video increases significantly. Furthermore, in order to compress 6 degree-of-freedom (6 DoF) videos that support motion parallax, it is required to develop a codec to yield better coding efficiency. In this paper, we develop a 6 DoF codec using Versatile Video Coding (VVC) as the next generation video coding standard. To the authors' best knowledge, this is the first VVC-based 6 DoF video codec toward the future ISO/IEC 23090 Part 7 (Metadata for Immersive Media (Video)) MPEG-I standardization. The experiments were conducted on the seven test video sequences specified in Common Test Condition (CTC) in two operation modes of TMIV (Test Model for Immersive Media) software. It is demonstrated that the proposed codec improves coding performance around 33.8% BD-rate reduction in the MIV (Metadata for Immersive Video) mode and 30.2% BD-rate reduction in the MIV view mode as compared to the state-of-the-art TMIV reference software. We also show the performance comparisons using Immersive Video PSNR (IV-PSNR) and Mean Structural Similarity (MSSIM).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5622-5632
• /
• 2011

This paper presents the simulation design and analysis of Integrated Logistics System(ILS) which is operated by using the AGV(Automated Guided Vehicle). To maximize the operation performances of ILS with AGV, many parameters should be considered such as the number, velocity, and dispatching rule of AGV, part types, scheduling, and buffer sizes. We established the design of experiment in a way of Orthogonal Array in order to consider (1)maximizing the throughput; (2)maximizing the vehicle utilization; (3)minimizing the congestion; and (4)maximizing the Automated Storage and Retrieval System(AS/RS) utilization among various critical factors. Furthermore, we performed the optimization by using the simulation-based analysis and Evolution Strategy(ES). As a result, Orthogonal Array which is conducted far fewer than ES significantly saved not only the time but the same outcome when compared after validation test on the result from the two methods. Therefore, this approach ensures the confidence and provides better process for quick analysis by specifying exact experiment outcome even though it provides small number of experiment.

• The Korean Journal of Applied Statistics
• /
• v.26 no.2
• /
• pp.335-347
• /
• 2013

There are various types of real world signals. For example, an electrocardiogram(ECG) represents myocardium activities (contraction and relaxation) according to the beating of the heart. ECG can be expressed as the fluctuation of ampere ratings over time. A signal is a composite of various types of signals. An orchestra (which boasts a beautiful melody) consists of a variety of instruments with a unique frequency; subsequently, each sound is combined to form a perfect harmony. Various research on how to to decompose mixed stationary signals have been conducted. In the case of non-stationary signals, there is a limitation to use methodologies for stationary signals. Huang et al. (1998) proposed empirical mode decomposition(EMD) to deal with non-stationarity. EMD provides a data-driven approach to decompose a signal into intrinsic mode functions according to local oscillation through the identification of local extrema. However, due to the repeating process in the construction of envelopes, EMD algorithm is not efficient and not robust to a noise, and its computational complexity tends to increase as the size of a signal grows. In this research, we propose a new method to extract a local oscillation embedded in a signal by utilizing the second derivative.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.2
• /
• pp.159-164
• /
• 2006

Objectives : This study was conducted to evaluate the effects of the personal stereo system on the hearing in adolescents. Methods : A total of 68 adolescents(age: 13-18 years) who visited the ENT Department at a University Hospital in Daegu were personally interviewed. The questionnaires were about general characteristics of the subjects, the time of personal stereo system use (year, hour) and place. Cumulative exposure to the personal stereo system was calculated by the product of the total years and the daily hours of their use. Pure tone audiometry was performed and the hearing threshold was measured at 500, 1000, 2000, 4000 and 8000 Hz. Results : The average time of using a personal stereo system a day was about 3 hours and 75% of the subjects used a personal stereo system for 2-5 years. The elevation of threshold was more prominent in the subjects who used personal stereo systems for 4 years and more compared with those subjects who used them for 3 years and under. The elevation of hearing threshold was also more prominent in the subjects who used personal stereo systems for 4 hours and more a day compared with those subjects who used personal stereo systems for 3 hours and under a day. The elevation of hearing threshold was more prominent in the subjects who used personal stereo systems for 13 hour. years and more compared to the subjects who used them 12 hour. years and under. Conclusions : These results suggest that the elevation of hearing threshold can happen to adolescents who used personal stereo systems for a long time. In order to prevent hearing loss, we need to teach adolescents appropriate usage of the personal stereo system and hearing tests should be included in the periodic school-based physical examination for the adolescents.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.95-103
• /
• 2009

In this paper, a generation method of transmit and receive beamforming vectors based on base station cooperation is proposed which maximizes the user SINR in mobile cellular multi-user MIMO systems. There are two main sources of interference which deteriorate the performance of the system, i.e. the inter-user interference caused by the usage of the same radio resource for multiple users in the system, and the inter-cluster interference from neighboring base stations which are not participating in cooperative transmission. The proposed scheme cancels out the inter-user interference by using the block diagonalization(BD) method, and mitigate the inter-cluster interference by using optimal transmit and receive beamforming vectors based on optimal combining(OC) with the statistic information of inter-cluster interference. We perform computer simulations to verify the performance of the proposed scheme, and compare the result to the conventional performance obtained from utilizing the receiver side information only or utilizing the information from neither sides. The performance evaluations are conducted not only over the independent MIMO channels, but over correlated MIMO channels to demonstrate the robustness of the proposed scheme over the channels with correlation among antennas.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.417-427
• /
• 2021

Long-range communication in deep waters must overcome the low data rate due to limited bandwidth. This paper presents the performance of Multiple-Input-Multiple-Output (MIMO) system to increase the data rate. In MIMO system, communication performance is degraded by crosstalk between users and an adaptive passive Time Reversal Processing (TRP) is widely used to eliminate this. In October 2018, long-range underwater acoustic communication experiment was conducted in deep water (1,000 m ~) off the east of Pohang, South Korea. During the experiment, a vertical line array was utilized and communication signals modulated by binary phase shift keying and quadrature phase shift keying with a symbol rate of 512 sps were transmitted. To generate MIMO communication signals, received signals from ranges of 26 km and 30 km is synthesized. Compared to the conventional passive TRP, the adaptive passive TRP eliminates the crosstalk between users and achieves error-free performance with an increase of output signal-to-noise ratio. Therefore, two users separated by 4 km in range achieves an aggregate data rate of 1,024 symbols/s.

• 재활복지
• /
• v.20 no.4
• /
• pp.247-264
• /
• 2016

The Children's Home Inventory for Listening Difficulties (CHILD) questionnaire has been applied for assessing listening and communication difficulties in various home situations for children with hearing loss. The purpose of the study was to translate the CHILD questionnaire for parents into Korean and verify reliability and validity of Korean version of CHILD (CHILD-K). CHILD-K was completed by 55 parents of children (from ages 3~12 years) using cochlear implants (CI). Among the 55 children, 27 were in preschool and 28 in elementary. Internal consistency reliability of CHILD-K was verified by Chronbach's alpha. The mixed factorial ANOVA was conducted to compare the effects of the age group and situation factors (Quiet, Noise, Distance, Social, and Media factors) on the score of CHILD. The results indicated that CHILD-K showed excellent internal consistency reliability (${\alpha}=.96$). The CHILD scores among age groups were significantly different as the older age group resulted in higher scores in all situations except Distance. For both groups the mean scores for the Quiet situation were significantly higher than other situations, and the mean scores for the Social situation were significantly lower than other situations. Moreover, analysis showed that children with CI had difficulties in the Social situation combined with other situation factors. The results indicate that the Korean version of CHILD questionnaire is a reliable tool for the assessment of communication abilities in home situation in Korean-speaking children using CI.

• 재활복지
• /
• v.22 no.1
• /
• pp.169-194
• /
• 2018

The aim of this study is to examine changes in swallowing function and quality of life with therapeutic singing-based music therapy for patients with dysphagia. The music therapy program was based on the previous study (Kim, 2010), and designed to improve breathing, phonation, and swallowing functions focusing on laryngeal elevation. Three patients with dysphagia participated in this study and each participant received a total of 11 or 12 individual music therapy sessions and each session was conducted for 30 minutes. In this study, three kinds of measurements were used. First, the measures of maximum phonation time (MPT), fundamental frequency, average intensity, jitter, shimmer, noise to harmonics ratio (NHR) by Praat test, second, laryngeal-diadochokinesis (L-DDK) to investigate laryngeal elevation, and last, the Swallowing-Quality of Life (SWAL-QOL) was measured. These cases have shown improved breathing, phonation, swallowing function, and the scores of SWAL-QOL in all of the patients. It suggests that this music therapy intervention was effective on laryngeal elevation, and the music intervention with therapeutic singing can be effectively implemented in further research for patients with dysphagia.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.878-886
• /
• 2018

This study quantified the sounds of riffles and pools in natural rivers and conducted a comparative analysis of the frequency and sound pressure per flow velocity. The surveyed area was Namdaecheon basin in Yangyang-gun, Gangwon-do and the sounds of a total of 23 sites were analyzed. A hydro microphone was used to measure the sound and analyze the data using an acoustic analysis program. The location was also selected at places with minimal ambient noise and the measurement points were the depth of riffles and pools. The results revealed an average difference of 0.515 m/s for flow velocity at 8 riffles and 15 pools. The difference in sound pressure occurred due to the flow velocity. In the case of sound pressure, it was measured at an average of 176.8 dB for riffles and 168.2 dB for pools, demonstrating a difference of approximately 8.6 dB. Furthermore, in the case of maximum sound pressure, riffles showed a constant range between 200 Hz and 250 Hz, while the pools exhibited maximum sound pressure at various frequencies from 200 Hz to 1,000 Hz. This revealed the ecological stream reproduction, development of preferred sound sources for aquatic life, and design of structures.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.327-337
• /
• 2018

Since the track of the ballastless steel plate girder bridge is connected to a main girder without a deck and a ballast, the impact generated by train passage is transferred directly to bridge main members, and it can cause frequent damage of the bridge as well as higher noise and vibration level. Applying the CWR (Continuously Welded Rail) technology can reduce this structural problems, and, to this end, it is necessary to understand the characteristics of factors influencing vehicle-track or track-bridge interaction. In this paper, experimental study results are presented for examining the longitudinal resistance characteristics of the track, including a rail fastener, a sleeper fastener, and a track skeleton, installed on a ballastless steel plate girder bridge. The experiment is conducted using a disposed bridge from service, which is transported to a laboratory. The experimental results show that the rail fastener satisfies the performance criteria of the longitudinal resistance presented in KRS TR 0014-15, and the longitudinal resistance of old and new type sleeper fasteners is higher than the values provided in the existing research. Also, the unloaded longitudinal resistance of the ballastless track is between the ballast and the concrete tracks.