• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.54
• /
• pp.123-144
• /
• 2012

Seller shall deliver the goods with a perfect condition of packing or container in international trade. Unless otherwise seller shall warranty that the goods arrive at destination with a safe and economic value. Buyer may ask packing is to be made in specific condition or refuse to accept when the packing is not made in accordance with trade customs between among merchants. Especially packing is to be considered under the local law and process. Sometimes tax will be added to specific condition of packing for example glasses, metal sheet or others. Warning signs shall be included as form of both words and diagrams, and be in form of ensuring understanding in the local market. Wide range of warning signs can be used for communications and understanding of packing. Packing of a product can usefully symbolize a range of product information, or any relevant warnings, and give an opportunity for displaying messages of promoting the company and the goods. The seller may choose the best method to maintain its value but find a way to reduce packing cost, size for convenience during delivery, design, and local customs. There are many things to be considered for packing to seller. The purpose of packing is to protect the goods itself and to maintain its economic value during storage, delivery, transshipment, and distribution to end users.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.1-7
• /
• 2011

The analysis shows that the vibration is one of the main reasons of turbine failure. Especially, the problems caused by vibration occur right after retrofit of the turbine-generator and restarting the turbine. Through the case study of high vibration caused by after the turbine trip and restart, turbine vibration was identified to be influenced by startup condition. Turbine startup at high casing temperature right after unscheduled turbine trip cause radial expansion in rotor by contraction in axial direction, while casing continues to contract by steam flowing into casing. Consequently, gap between rotor and casing decrease until to metal contact to cause high vibration. Through the case study of high vibration of turbine-generator system after generator retrofit, it was identified that generator replacement could cause high vibration in turbine-generator system if the influence of generator replacement on entire system was not considered properly. To prevent startup delay caused by high vibration, it is important to keep the gaps at the design standard and start the turbine after thermal equilibrium.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.69
• /
• pp.673-698
• /
• 2016

This study tries to conduct a systematic analysis on whether adding up the royalties and license fees or not in measuring the taxable amount of tariff. We have confirmed that three main criteria to decide whether it is yes or not are non-inclusion, relatedness and condition of sale. We also have realized that whether satisfying a condition of sale or not depends on license agreement, sales contract, special relationship and so on. Furthermore, we have made case studies of bonded factory, film's domestic distribution, exempt royalty and license fee, price for exclusive use of relevant technology, retroactive application of price change and strict interpretation. Based on the case studies we have derived the following conclusions: First, the royalties and license fees only actually paid to the licensors may be added to taxable amount. Second, the royalties and license fees incurred after the imported goods are made into domestic goods may not be added up. Third, the royalties and license fees paid as a price for use may not be added up. Fourth, the analogical interpretation of relevant codes is not accepted.

• The Korean Society of Law and Medicine
• /
• v.10 no.1
• /
• pp.263-305
• /
• 2009

Is it lawful to withhold or withdraw life-sustaining treatment applied to a patient in a terminal condition or permanent unconscious condition? In Korea, there are no such laws or regulations which control affairs related to the withholding or withdrawal life-support treatment and active euthanasia as the Natural Death Act or the Death with Dignity Act in the U. S. A. And in addition there has had no precedent of Supreme Court. Recently Supreme Court has pronounced a historical judgment on a terminal care case. The court allowed the withdrawal of life-sustaining treatment from a patient in a permanent unconscious state. Fundamentally the court judged that the continuation of that medical treatment would infringe dignity and value of a patient as a human being. And the court required some legal grounds to consider such withdrawal or withholding of medical care lawful. The legal grounds are as follow. First, the patient is in a incurable and irreversible condition and already entered a stage of death. Second, the patient executed a directive, in advance, directing the withholding or withdrawal of life-support treatment in a incurable and irreversible condition or in a terminal condition. Otherwise, at least, the patient's will would be presumed through his/her character, view of value, philosophy, religious faith and career etc. I regard if a patient is in a incurable and irreversible condition or in a terminal condition, the medical contract between a patient and a doctor would be terminated because of the actual impossibility of achievement of it's purpose. So I think the discontinuation of life-sustaining care would be legally allowed without depending on the patient's own will.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.342-348
• /
• 2013

It proposes an efficient control algorithm to increase electric power transmission efficiency between photovoltaic power generating system and the grid. The main controller finds a maximum efficiency condition by considering the quantity of power generated from PV arrays, the number of inverters, and efficiency of PV inverter. According to the condition, a relay board arranges a point of contract of PV arrays. By the disposition of PV arrays, it assigns the optimized power on each PV inverter. Operational principle of the proposed maximum efficiency point tracking algorithm is given in detail. To verify the validity of the proposed approach, computer-aided simulation and experiment carried out.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.1
• /
• pp.39-50
• /
• 2019

The purpose of this study is to figure out the current condition of local governments (Si or Gun) to implement rural development policy in the face of the central government's drive for increasing devolution. Since late 1990s or early 2000s when scope of rural policy began to expand quantitatively, there has been considerable increase in rural residents' participation into community projects as a whole. Nevertheless, there exists regional differentiation in local governments' efforts to systematically support rural development projects (CRDP: Comprehensive Rural Development Programme) and community activities by setting up intermediary organizations or hiring rural development professionals in a public office. According to this survey on local government officials, regions that have made such efforts to support rural policy at a local level, show more advanced level of institutional capacity than other regions in local decision making process for CRDP, role of strategic rural developmental plans, vitality of community actors, etc. In the era of increasing devolution, these differences can be expected to result in diverging performances of each area in regionalized rural policy. The central government needs to introduce EU's LEADER-type rural development programmes to support community acitivities by various local actors and at the same time promote local governance building for rural policy, adopting institutional rewarding system such as rural planning contract.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.43-59
• /
• 2012

As contemporary building construction type is getting higher and deeper,construction equipment usage is getting more, and related fatal accidents are on an increasing trend. In these days, due to the deteriorating construction business circumstance, job finding problem of equipment operator, and dumping contract, equipment lease suppliers are putin jeopardy. In high-rise building construction, especially tower crane, mobile elevated work platform and other High place operation cars among construction equipment cause many critical accidents because of drop supply of construction biding bringing out dumping contract could cause unsafe and poor construction management. Because of this, a method was drawn which could grasp the present state of construction equipment management and manage safety of the equipment more easily for accident prevention by choosing 2 kinds of Construction equipment which cause safety accident frequently among the equipment mainly used in construction site. This study suggested a method about construction equipment safety management using "smart phone" base which could be used in safety management for construction equipment by whomever in construction site. After attachment of QR code included safety checklist, It became possible that site managers could check more efficiently by scanning with their smart phone when they inspect equipment. Moreover, by the construction interested who didn't know what and how they have to inspect could point out unsafe condition in the early stage of equipment entering or take unsafe one out of the site by using new smart phone safety checking system is installed, it became possible that critical accident caused by construction equipment was prevented in advance.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.336-345
• /
• 2010

GS E&C was awarded the contract for the construction of Hanoi - Hai Phong Expressway Package EX-7 from Station Km 72+000 to Station Km 81+300 in December 2008. This project is the $7^{th}$ contract package of the 105.5 km long expressway near Hai Phong city, which includes a FCM-styled bridge along with high embankments over soft ground. For these high embankments, there is a need to treat the soft soil for improving the overall stability during construction and for reducing the post-construction settlement of the expressway. The Designer of this project had adopted four (4) different types of ground improvement techniques to treat the soft ground, including the prefabricated vertical drains (PVD), sand drains (SD), pack drains (PD, or sometimes called packed sand drains), and sand compaction piles (SCP). The main focus of soft soil treatment should be paid attention to the residual settlement after construction. In current design, however, it appeared that the secondary compression (or creep) of the improved soil layer and the consolidation settlement of the lower untreated compressible soil layer have been neglected in the estimation of the post-construction settlement. These uncalculated residual settlements may not only unsatisfy the design criteria but also raise serious problems during service period of this expressway. In this paper, the subsoil condition and current design were reviewed focusing on the employed soft soil treatment method and expected residual settlement.

• Plant Journal
• /
• v.7 no.3
• /
• pp.65-73
• /
• 2011

This research has suggested a method to select pipe wall thickness by application of the value engineering to reduce the cost and quantity that are major part of construction materials. This research shows that the application of value engineering reduces the cost of piping materials by optimizing pipe wall thickness while maintaining process flow date of design pressure and design temperature. Based on this knowledge, the application of the value engineering will lead to the cost reduction and quantity reduction by effective selection of pipe wall thickness. The application of the value engineering will help the EPC companies to win a contract in the overseas plant market.

• PNF and Movement
• /
• v.6 no.3
• /
• pp.29-35
• /
• 2008

Purpose : To describes the important aspects of the foot and ankle movement and function used when git and balance strategy. Method : The foot and ankle was a very important roles in the lower limb movement and gait. This study summarizes the physiologic movement of knee to the PNF lower extremity patterns. Result : The ankle joint composed of the talocural joint, the subtalarl joint, transverse tarsal joint, talocalcaneonavicular joint. The onset of dorsiflexion muscle activity starts in pre swing gait patterns. First contract muscle is the extensor hallucis. Activity of tibialis anterior and extensor digitorum longus quickly follows in mid swing gait phase. During stance phase, the soleus and gastrocnemius muscle provided plantar flexor torque, which muscle reacts quickly to restrain ankle dorsiflexion, and contributes modulated control of the ankle motion in gait patterns. Conclusions : The understanding of ankle kinematics, could provide a good therapeutic approach for improving gait patterns in patients with various pathological condition.