• 약학회지
• /
• 제55권3호
• /
• pp.251-259
• /
• 2011

Cigarette smoke condensate (CSC) is known to be carcinogenic compound. CSC contains many organic compounds such as polycyclic aromatic hydrocarbons (PAHs), and heterocyclic amine compounds (HCAs). Reactive oxygen species (ROS) are also generated and induce oxidative DNA damage during the metabolism of CSC. The rat microsome mediated and DNA repair enzyme treated comet assays together with conventional comet assay were performed to evaluate the mechanisms of CSC genotoxicity. The organic extract of CSC induced oxidative and microsome mediated DNA damage. Vitamin C as a model antioxidant reduced DNA damage in endonuclease III treated comet assay. One of flavonoid, galangin as a CYP1A1 inhibitor, reduced DNA damage in the presence of S-9 mixture. The ethanol extracts of the mixed vegetables (BV) or the mixed fruits (BF) showed potent inhibitory effects against CSC induced DNA damage with oxidative DNA lesions and in the prescence of S-9 mixture. These results indicate that BV and BF could prevent CSC-induced cellular DNA damage by inhibiting oxidative stress and suppressing cytochrome P450 in mammalian cells.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.151-165
• /
• 1996

Relation between condensate retention and heat transfer performance is studied for condensation of CFC-11 on horizontal integral-fin tubes. Eight tubes with trapezoidally shaped integral fin density from 738fpm to 1654fpm and 10, 30 grooves are tested. The liquid retention angles are measured by the height gauge, and each tube is tested under static(non-condensing) condition (CFC-11, water) and under dynamic(condensing) condition (CFC-11). The analytical model predicts the amount of liquid retention on a horizontal integral-fin tubes within＋10 percent over most of the data. Average retention angle increases as both surface tension-to-density ratio($\sigma/\rho$) and fin density(fpm) increase, The tube having a fin density of 1299~1654fpm has the best heat transfer performance. The amount of surface flooding must keep below of 40 percent for best heat transfer performance at condensation. The tube having low number of fin density must be used for fluids having high values of $\sigma/\rho$(water, (TEX)$NH_3$, ect.) and the tube having high number of fin density must be used for the fluid having low values of $\sigma/\rho$(R-11, R-22, etc.)

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.860-866
• /
• 2009

It is very important to choose optimal material having good corrosion resistance and capabilities for the part materials such as the automotive exhaust system under a hot salt corrosion atmosphere. Generally, two types of corrosion come into the automotive exhaust system. One is 'Condensate Corrosion', which is occurred by exhaust gas condensate formed at the inner surface of exhaust system heated up during driving, which results in the acid condensate pitting. The other is 'High Temperature Salt Corrosion' occurring from the interaction between the chloride ion coming from salt at the seaside district or snow salt and the outer surface of exhaust system. By the corrosion attack, the main muffler is firstly damaged and the life cycle of an automobile is significantly decreased. It has been investigated that the hot salt corrosion properties of a STS 409L and 436L ferritic stainless steels which are well-known for the materials of the automotive exhaust system. In addition, the corrosion properties of hot dip aluminum coated STS 409L have been compared with uncoated steels. Aluminum coated STS 409L showed a superior corrosion resistance than uncoated STS 409L, and futhermore showed a better corrosion resistance than a STS 436L, which is an expensive ferritic stainless steel having a excellent corrosion resistance caused from more chromium content of an alloying element.

• Corrosion Science and Technology
• /
• 제20권2호
• /
• pp.69-76
• /
• 2021

In this work, we have performed a corrosion failure analysis of a leaking tube connected to an upper header of a condensate pre-heater in a heat recovery steam generator. It was revealed that the leakage position in the tube was the location where the materials were easily vulnerable due to tensile residual stresses induced by the material manufacturing process and welding process. In addition to an imbalance in the module induced by temperature difference during operation of the pre-heater, the weight of the modules and thermal fatigue provoked a type of stress of tensile-tensile fatigue on the tube. Thus, the leakage position of the pre-heater was exposed to the tensile stress on the inner surface of the tube facing the gas, which rendered the unstable oxide layer susceptible to corrosion and the formation of pits on the water side. The cracks propagated along with the degraded microstructure in a transgranular cracking mode under fatigue loading and finally resulted in water leakage.

• 대한설비공학회지:설비저널
• /
• 제12권4호
• /
• pp.252-263
• /
• 1983

In the briquet-burning hot water boiler the $SO_x$-dew point is calculated and found to be between $130^{\circ}C\;and\;154^{\circ}C$. The corrosion rate depends on the surface temperature and the concentration of the condensate on the surface. The concentration of the condensate is decided acoording to the difference detween $SO_x$-dew point and the surface temperature. When the surface temperature is $80^[\circ}C$, the concentration of the condensate is also high (0.15N). Therefore the high concentration and high temperature promote the high corrosion rate of $14{\times}13^{-3}g/100cm^2{\cdot}hr$ on the SS41 material. On the other hand, when the surface temperatures are $60^{\circ}C\;and\;40^{\circ}C$, the concentrations and the co..sion rates are reduced dramatically to $0.11\;N,\;8.6{\tiems}10^{-3}g/100cm^2{\cdot}hr$ and $5{\tiems}10^{-4}g/100cm^2{\cdot}hr$ respectively.

• KSBB Journal
• /
• 제16권4호
• /
• pp.403-408
• /
• 2001

알코홀 증류폐액은 통상적으로 COD 50,000-60,000 ppm, TS 3-8%, SS 2-4%, TN 0.05-0.2% 정도가 포함되어 있어 높은 SS와 TN 함량 때문에 종합폐수로써 생물학적 처리를 하거나 혐기성 소화를 통하여 처리하는 데 문제가 있다. SS의 주성분으로는 미발효 원료 잔류물과 함께 균체, 단백질, 섬유질, 그리고 기타 현탁성 또는 용해성 물질들이 포함된다. 본 연구에서는 알코홀 증류폐액 처리의 한 해결책으로써 0.1 $\mu$m Pore size를 갖는 스테인레스 재질의 분리막을 이용한 pilot scale 정밀여과(microfiltration)를 실시하였다. Decanter로 처리된 증류폐액을 정밀여과 처리한 결과 2.5 bar, 6$0^{\circ}C$ 조건에서 VCR 농축도 10X 정도가지 원활한 permeate flux를 얻으며 24시간 이상 장시간 여과가 가능하였고 feed 중 0.7%였던 SS가 100% 가까이 제거된 permeate를 얻을 수 있었다. SS는 retentate 중에 7%까지 농축 가능하였으며 COD는 25-27% 정도 제거되었다. SS가 2.6%인 decanter를 거치지 않은 증류 원폐액의 경우, VCR 3X 이내의 조건으로 여과할 때 SS를 100% 가까이 그리고 COD는 약 50% 정도 제거 가능하였다. 무방류 시스템으로의 전용을 위하여 정밀여과로 얻어진 permeate와 retentate를 발효배지 사입수으로 재활용하여 알코홀 발효에 미치는 영향을 검토한 결과, 재활용 사입수를 사용하지 않은 경우에 비해 발효 도중 이상 현상이나 발효속도와 알코홀 생산량에 부정적인 영향을 미치는 징후는 발견되지 않았다. 발효에 의한 총 $CO_2$ 발생량과 최종 알코홀 함량은 약간 증가하고 큰 차이를 보이지 않았으나, 발효시간 동안의 $CO_2$ 발생속도는 비교적 빨라져서 $CO_2$ 발생량 450 L/ton에 도달하는 시간은 재활용 사입수를 15% 사용했을 때 83-87%, 30%를 사용했을 때 72-76% 정도 단축되는 효과를 얻었다. 증류폐액을 처리하기 위해 사용되는 기존 decanter를 대체하여 정밀여과 막분리장치를 이용한다면 SS가 완벽하게 제거됨으로써 폐수처리의 부하를 줄이는 한편 부가적인 농축 공정을 줄일 수 있을 것으로 기대된다. 또한 여과 permeate를 발효배지 사입수로 재활용함으로써 발효속도를 증진시킬 수 있으며 용수사용량을 절약할 수 있다.

• 대한조선학회지
• /
• 제38권4호
• /
• pp.46-49
• /
• 2001

• 정보관리연구
• /
• 제8권4호
• /
• pp.115-119
• /
• 1975

• 정보관리연구
• /
• 제8권3호
• /
• pp.69-75
• /
• 1975

• 한국연초학회지
• /
• 제10권1호
• /
• pp.49-57
• /
• 1988

The phenolic compounds were isolated from the cigarette smoke condensate using two immiscible organic solvents by a partition coefficient. Of them, 20 phenolic compounds were identified by GC and GC/MS. The amount of the phenolic compounds was phenol, p-crestol, hydroxybensoic acid in order. And there was no difference in composition of these compound dependent on leaf tobacco . About 70% amount of these compounds were absorbed to cellulose acetate filter used. The contents and composition of these compounds were various in the commercial cigarette.