• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.186-193
• /
• 2010

철도교에서는 일정한 간격의 축중을 가지는 차량하중이 반복적으로 재하되므로 정적성능과 더불어 동적성능이 매우 중요하다. 또한 철도교의 상부에 부설되는 궤도시스템은 교량의 정 동적 성능에 영향을 주는 것으로 알려져 있다. 본 연구에서는 실제 궤도시스템을 적용한 거더시험체를 제작하여 궤도시스템에 따른 교량의 정 동적거동을 분석하였다. 정적거동 분석에서는 교량 처짐 및 응력을 검토하고 중립축위치를 분석하였으며, 동적거동 분석에서는 고유진동수, 감쇠비, 하중크기, 하중진폭에 대한 영향을 궤도시스템별로 검토하였다. 궤도부설에 따른 정적처짐 변화검토를 통해 궤도 부설전에 비해 자갈궤도는 약 7%, 콘크리트궤도는 약 50%의 강성 증가 효과가 있음을 확인하였고, 궤도 부설 시 교량의 고유진동수가 낮아졌으나 감쇠비 변화는 없는 것으로 분석되었다. 또한, 최대하중 크기가 증가할수록 철도교량의 동적응답(처짐 및 가속도)이 선형적으로 증가하였으며, 하중진 폭은 공진 시 교량의 동적응답을 크게 증가시키는 것으로 분석되었다. 따라서, 자갈궤도는 교량의 강성을 일정 부분 증가시키고, 콘크리트궤도의 경우 자갈궤도 부설 교량에 비해 상당한 강성기여도를 가지고 있음을 실험적으로 입증하였으나, 정량적인 강성기여도의 크기는 자갈궤도 및 콘크리트궤도의 설계값에 따라 상이할 수 있기 때문에 이를 적용할 수 있는 궤도의 질량 및 강성기여도 분석방법 개발이 필요할 것으로 판단된다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.485-492
• /
• 2000

In the rail facilities the rail track consists of rail tie fastening accessories and bed,. The rail track is largely divided into Ballast Bed Track(BBT) and Concrete Bed Track(CBT) according to the type of bed. In this thesis among Concrete Bed Track slab track which is used for the Japanese high speed railway is a target of this study. Dynamic analysis by using finite element method are performed. where moving rain load is periodic function. Then through parametric study some conclusions are obtained as follow. Cement Asphalt Mortar(CAM) affects contrary mechanical behavior to rail and slab greatly. Therefore change of CAM spring coefficient should be handled with care, For slab thickness thin slab is more profitable to reduction of vibration of rail than thick one but mechanical capacity of slab is deteriorated, Improved structural type is proposed then structural analysis is performed for this one. This type is effective to reduction of vibration of railway system.

• 한국철도학회논문집
• /
• 제5권1호
• /
• pp.48-54
• /
• 2002

This research estimated decreased vibration level as quantitative according to change of track system on Seoul Subway Line No. 1 from existing ballasted track system(Pandrol type clip) to concrete track system(Youbgdan type isolation rubber clip). Following change to concrete system, vibration level at tunnel floor decreased between 4-8dB(V). Vibration equations suggested in this paper consider the velocity of train and can estimate quantitative vibration response. These are divided by ultimate limit state($\beta$=0), serviceability limit state($\beta$=1.28) and safety state($\beta$=3), respectively. The reliability index, $\beta$=0, means 50％ data line obtained by least squares best-fit line. The reliability index $\beta$=1.28 and 3 represent boundaries below 90％ and 99.9％ respectively.

• 한국철도학회논문집
• /
• 제10권3호
• /
• pp.296-305
• /
• 2007

A numerical method for the analysis of train/slab-track interaction on the settled roadbed is developed based on the already developed analysis method of train/ballast-track interaction. The concrete slabs composed of the upper track concrete layer and the lower hydraulic bonded layer are modelled by a equivalent beam. The supporting stiffness of roadbed is evaluated with the modified boussinesq method suggested by Eisenmann. The track irregularity and the gap between slab and roadbed induced by settlement of roadbed are calculated by the effective method newly presented in this study. The validation of the developed method is investigated by a numerical example. The effects of train speed on train and slab track on the settled roadbed with sinusoidal shape of wave length 20m and amplitude 20mm are reviewed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.442-445
• /
• 2011

Concrete track on the new railway lines of the existing roads are built on high ground, or less than 400m radius of the sharp curve sectors will occur. sharp curve sectors the rail and wheel friction, stick-slip due to the band of 1,000Hz or squeal noise occurs from the increase in civil complaints about noise is a real situation. In this study, discussed in previous studies, noise measurements for each radius of concrete track and frequency analysis, followed by the radius of the curve in order to investigate vibration characteristics of urban railway sector sharp curve radius less than 400m and 400m ~ 1,000 m further to the point selected track components(rails, sleepers, ballast) according to the vibration measurements and analysis of the frequency characteristics and the results were derived.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.505-510
• /
• 2007

Concrete track will be constructed in Gyungbu High Speed Railway II(GHSR II) stage construction site from Daegu to Busan. Concrete track is supported by substructure consisting of the original ground and embankment and does not allow the settlement of track because of its structural type. The embankment is composed of rock and soil mixture and settlement is feasible. So management of settlement of embankment is key point in successful construction of the concrete track. Compaction management of mixed fill materials is important in minimizing the settlement of embankment. In this study, in order to assess the compaction characteristics of mixed fill materials, large laboratory compaction tests were conducted. Mixed fill materials were obtained from two construction sites in GHSR II construction site. Modeled mixed fill materials having different rock type, fine content, maximum particle diameter, and moisture contents were prepared. From the test results, compaction characteristics of mixed fill materials were analysed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1002-1008
• /
• 2011

Turnout is a mechanical installation enabling railway trains to be guided from one track to another at a railway junction. there are classified variously according to rail type, sleeper type, fastening system, track type. Construction of concrete track are on the increase recently to secure the safety of track structure as well as to reduce the maintenance cost. SFC fastening system used the plain track a lot and for those reasons, The fast clip turnout demand growing to improving efficiency of the maintenance cost by unification of fastening clip on whole line. in this study is about development of the fastening system for new turnout using fast clip. this fastening system assembled elasticity pad underneath a base plate. its can change stiffness how to adjust contact surface area of elasticity pad Developed fastening system have passed test according to rule of KRS-TR0014-09R (rail fastening system) and Performance Certification by KR.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.340-350
• /
• 2007

The major objective of this study is to investigate the fatigue effects of rail pad on High Speed Railway with concrete slab track system. It analyzed the mechanical behaviors of HSR concrete slab track with applying rail pad stiffness based on fatigue effect(hardening and increasing stiffness) on the 3-dimensional FE analysis and laboratory test for static & dynamic characteristics. As a result, the hardening of rail pad due to fatigue loading condition are negative effect for the static & dynamic response of concrete slab track which is before act on fatigue effect. The analytical and experimental study are carried out to investigate rail pad on fatigue effected increase vertical acceleration and stress and decrease suitable deflection on slab track. And rail pad based on fatigue effect induced dynamic maximum stresses, the increase of damage of slab track is predicted by adopting fatigue effected rail pad. after due consideration The servicing HSR concrete slab track with resilient track system has need of the reasonable determination after due consideration fatigue effect of rail pad stiffness which could be reducing the effect of static and dynamic behavior that degradation phenomenon of structure by an unusual response characteristic and a drop durability.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.71-79
• /
• 2008

The concrete track is being used at the Phase II of the Kyeongbu High Speed Railway and New Constructed Honam High Speed Railway. When it makes a decision of bridge type, It has to consider about longitudinal forces of Continuous Welded Rail, Displacement at the end of bridges, Up-lift forces for fastener on the track. If it is installed turnout on the bridge, There is likelihood of the deck twist by applying the each difference longitudinal forces at the 4 each rails and the buckling by concentration of rail stress at the turnout. Moreover, If it is installed turnout on the continuous bridge and REJ(Rail Expansion Joint) on the main track or turnout track. It is hard to keep a safety for rail because of coming to twist or folding at the expansion of deck on the turnout track. Therefore when it is a design of bridge with turnout. It need to take bridge type to minimize an additional axial force and a displacement at the turnout. This paper makes a study of the composite steel arch bridge that is able to resolve criteria requirements of safety for track with turnout and suggest a helpful design method for bridge considering track with turnout by being based on design and construction method of Eonyang Bridge at the north part of Ulsan Station in Phase II of the Kyeongbu High Speed Railway.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권2호
• /
• pp.110-121
• /
• 2016

구조 형식이나 공법의 선정, 유지보수 시기, 보수방법의 결정 등의 의사 결정에서 수명주기비용(life cycle cost, LCC)의 평가가 중요하다. 철도 궤도구조의 경우 초기시공비 뿐 아니라 유지보수비가 총 비용의 상당 부분을 차지하고, 특히 자갈궤도일수록 그 비율은 더욱 높으므로 수명주기비용 평가의 필요성이 더욱 높다. 이 연구에서는 궤도 구조 형식, 연간 통행량, 축중, 열차 속도, 곡선 비율, 구조물(교량, 터널) 비율 등 다양한 설계변수를 고려할 수 있는 LCC 산정 모델을 개발하고, 각 비용의 산정에 필요한 기초 자료를 제시하였으며 구축된 모델과 자료를 바탕으로 주요 설계변수에 따른 고속철도 자갈궤도와 콘크리트궤도 LCC의 변화 경향을 분석하고, 이로부터 궤도 LCC 분석에 있어서의 고려해야 할 주요 변수를 검토하였다. 검토 결과 자갈궤도는 교체 및 운영 비용의 비중이 콘크리트궤도에 비해 현저히 높았으며, 연간 통행량과 자갈 탬핑 주기가 자갈궤도의 LCC에 가장 큰 영향을 미치는 것으로 나타났다. 반면 콘크리트궤도는 초기 시공비의 비중이 현저히 높았고, 연간 통행량이나 열차속도, 축중 등에 상대적으로 영향을 적게 받는 것으로 나타났다.