• Computers and Concrete
• /
• 제7권4호
• /
• pp.387-402
• /
• 2010

From typical stress-axial strain curve and stress-volume strain curve of a concrete under uniaxial compression, the initiation and localization of microcracks within the interior of the specimen can be identified. The occurrence of random microcrack indicates the end of the linear elasticity, and the localization of microcrack implies formation of major crack, which triggers the onset of unstable crack propagation. The interval between initiation and localization of microcracks is characterized by a stable microcrack growth. Based on fracture behavior observed from a uniaxial compressive test of a concrete cylinder, a model has been developed to extract fundamental fracture properties of a concrete, i.e. the equivalent fracture toughness and the size of fracture process zone. The introduction of cracking Poisson's ratio accounts for tensile failure characteristics of concrete even under uniaxal compression. To justify the validity of the model proposed, tests on three-point bending have been performed to obtain the fracture toughness in accordance with two parameter fracture model and double-K fracture model. Surprisingly, it yields favorably comparable results and provides an encouraging alternative approach to determine fracture properties for concretes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.15-16
• /
• 2017

In this study, the flexural behavior of fiber-reinforced concrete by fiber type were evaluated. As a result, the flexural strength of the hooked steel fiber-reinforced concrete(HSFRC) was lower than that of the amorphous metallic fiber reinforced concrete(AFRC), however it was shown strain-softening behavior by the pull-out of fiber. The flexural strength and the equivalent flexural strength of polyamide fiber-reinforced concrete(PAFRC) were lower than other specimens, but the equivalent flexural strength ratio was similar to that of AFRC. The flexural behavior of the fiber-reinforced concrete was associated with the bonding and pull-out properties of the fiber and matrix depending on the fiber type.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.145-151
• /
• 2014

본 연구에서는 국내에서 발생되고 있는 파이넥스 수쇄 슬래그를 콘크리트용 잔골재로써 활용하기 위한 연구의 일환으로 파이넥스 수쇄 슬래그 잔골재의 기초물성을 평가하였으며, 파이넥스 수쇄 슬래그 잔골재를 사용한 굳지않은 콘크리트의 특성, 경화된 콘크리트의 역학적 특성을 보통강도 및 고강도 영역에서 강사와 비교 평가하여 콘크리트용 잔골재로써 사용성 검토를 수행하였다. 실험결과, 파이넥스 수쇄 슬래그를 사용한 콘크리트와 강사를 사용한 콘크리트의 품질특성은 동등수준인 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.13-16
• /
• 2003

There is no study that application of the maturity using H.B.C and H.S.C. Also activation energy has different values according to the cement, admixture and water-cement ratio. Therefore to make accurate explanation for the effect of temperature on concrete strength development properties, it is necessary that activation energy value according to the kind of cement is reviewed. This study compares and estimates equivalent age using activation energy value obtained by this experiment and Freiesleben activation energy value with compressive strength of concrete. As the result of this study, activation energy value obtained by this study has more accurate explanation of temperature's influence on concrete strength development than Freiesleben activation energy value.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.13.1-16
• /
• 2003

There is no study that application of the maturity using H.S.C and H.S.C. Also activation energy has different values according to the cement, admixture and water-cement ratio. Therefore to make accurate explanation for the effect of temperature on concrete strength development properties, it is necessary that activation energy value according to the kind of cement is reviewed. This study compares and estimates equivalent age using activation energy value obtained by this experiment and Freiesleben activation energy value with compressive strength of concrete. As the result of this study, activation energy value obtained by this study has more accurate explanation of temperature's influence on concrete strength development than Freiesleben activation energy value.

• Computers and Concrete
• /
• 제22권1호
• /
• pp.117-122
• /
• 2018

The use of nanotechnology materials and applications in the construction industry should be considered for enhancing material properties. However, in this paper, the technical and economical assessment of applying silica nanoparticles for construction of concrete structure is studied. In order to obtain the equivalent material properties of the structure, the Mori-Tanaka model is used considering agglomeration of nanoparticles. The effect of using these nanoparticles on mechanical properties of concrete, such as the modulus of elasticity, compressive strength, as well as its indirect effect on armature percentage is investigated. Finally, the price of silica nanoparticles and its effect on the price increase of concrete structure is investigated. The results show that increasing the volume percent of silica nanoparticles up to 10% improves elastic modulus 111% and reduces amateur percentage up to 72%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.795-798
• /
• 2002

Recently. the properties of early-age concrete are increasingly important because these properties directly influence the behavior of early-age concrete structures including stress and cracking behavior. Nevertheless, the studies on early-age concrete are limited to strength and temperature development. The purpose of present study is to propose a simple and rational method which can predict the stress and strain behavior of young age concrete. A series of test have been done to measure the temperature development, strains and stresses in concrete members. The concept of equivalent age was used to define the degree of hydration and this degree of hydration was used to calculate the strength and elastic modulus. The present study indicates that the calculated stresses correlate fairly well with measured stresses. The consideration of critical degree of hydration in calculating stresses gives more accurate results. The present study provides useful method and data in evaluating early-age behavior of concrete structure.

• 한국농공학회논문집
• /
• 제56권5호
• /
• pp.37-44
• /
• 2014

The physical, mechanical and freezing and thawing properties of non cement porous vegetation concrete using non-sintering inorganic binder have been evaluated in this study. Four types of porous vegetation concrete according to the binder type is evaluated. The pH value, void ratio, compressive strength, repeated freezing and thawing properties were tested. The test results indicate that the physical, mechanical and repeated freezing and thawing properties of porous vegetation concrete using the non-sintering inorganic binder is increased or equivalent compared to the porous vegetation concrete using the blast furnace slag + cement and hwang-toh + cement binders. Also, Vegetation monitoring test results indicate the porous vegetation concrete using the non-sintering inorganic binder have increasing effects of vegetation growth.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.179-184
• /
• 2000

The presens study was aimed to investigate the possibility of use of pozzolanic materials such as blast furnace slag, fly ash, paper sludge ash which are produced from industrial wastes, as construction materials. Experiments were undertaken to investigate the properties of concrete bricks and interlocking blocks made with these industrial by-products. As a result, it was found that the concrete bricks and interlocking blocks made with substitute materials have equivalent strength and quality to those of conventional concrete bricks and interlocking blocks made with only cement. Thus, it could be expected that recycling the industrial wastes can reduce manufacturing costs of the cement as well as prevent environmental pollution by the use of the by-products thrown out as wastes to make secondary products of the concrete.

• Advances in concrete construction
• /
• 제6권6호
• /
• pp.631-643
• /
• 2018

The focus of this paper is given to the investigation of mechanical properties of steel fibre reinforced self-compacting concrete after being exposed to fire. The research programme covered tests of two sets of beams: specimens subjected to fire and specimens not subjected to fire. The fire test was conducted in an environment mirroring one of possible real fire situations where concrete surface for an extended period of time is directly exposed to flames. Micro-cracking of concrete surface after tests was digitally catalogued. Compressive strength was tested on cube specimens. Flexural strength and equivalent flexural strength were tested according to RILEM specifications. Damages of specimens caused by spalling were assessed on a volumetric basis. A comparison of results of both sets of specimens was performed. Significant differences of all tested properties between two sets of specimens were noted and analysed. It was proved that the limit of proportionality method should not be used for testing fire damaged beams. Flexural characteristics of steel fibre reinforced self-compacting concrete were significantly influenced by fire. The influence of fire on properties of steel fibre reinforced self-compacting concrete was discussed.