통발과 자망 등에 어획되는 게류의 측면적인 보행운동은 매우 특이하여 어획 메카니즘을 밝히는데 매우 중요한 요소가 된다. 여기서는 해운대 동백섬의 조간대에서 채집한 풀게를 사용하여 망지위에서의 직선적인 운동과 회전 운동 등을 관찰하고 다리의 보행위치와 시간적인 변화를 분석하였다. 그 결과 망지위에서의 보행운동은 착지위치에 따라 그물코 사이로 다리가 빠지게 되는 불규칙적인 움직임이 대부분이므로 여러가지 보행 요인들의 편차가 게의 크기에 관계 없이 크게 나타났다. 풀게의 망지위에서의 보폭, 보행속도, 다리간의 위상차 등은 평면에서 보다 훨씬 작았으나, 보행주기, 다리마디간의 각도 등은 평면에서 보다 양간 증가하였다. 따라서 게가 자망에 걸리는 현상은 게의 크기에 따른 다리의 보행운동과 망지의 망목크기 등을 고려하여 세밀하게 조사되어야 할 것이다.
Fossil power plants firing lower grade coals or equipped with modified system for $NO_x$ controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2,\;NO_x$ and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective rear pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing $NO_x$ emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.
지금까지 관행적으로 액체의 누출은 순간누출과 연속누출로 분류 되어 왔다. 본 논문에서는 이러한 분류의 문제점을 인식하고 새로운 분류 방법을 찾기 위하여 제한된 시간 동안 누출되는 극저온 액체의 확산에 관한 연구를 수행하였다. 이러한 물리적 현상은 누출된 액체풀의 부피, 반경, 높이에 관한 연립방정식에 의해 지배되며, 주요 변수는 단위면적당 증발률, 누출시간, 누출량의 3 개 이다. 섭동법에 의한 해를 효율적으로 구하기 위하여 독립된 형태의 부피에 관한 2차 미분방정식을 얻었다. 이 새로운 지배 방정식은 기존의 방법에 비하여 매우 간단하게 해를 얻을 수 있게 한다. 섭동해의 결과, 동일한 누출량인 경우에 누출시간이 작으면 연속누출이 순간누출로 이어지는 혼합 형태의 누출이 되나, 누출시간이 크게 되면 연속누출 형태로만 존재하게 된다. 동일한 누출시간의 경우에는 누출량이 작으면 연속누출 형태로만 존재하지만, 누출량이 증가할수록 혼합형태의 누출로 된다. 이러한 2개의 영역을 분할하는 경계를 섭동해를 이용하여 해석적으로 제시함으로서 누출의 새로운 분류에 대한 명확한 근거를 제시 하였다.
The construction projects are recently having changes in their magnitude and complexity. Therefore, the amount of information created and managed by participants over project phases is enormous and this may cause difficulties in consistent and integrated data management. Because of the change in construction projects, there is a need to apply more logical and systematic ways to deal integrated data management. For the solution to this, BIM(Building Information Modeling), a new paradigm for integrated management of the information over project life-cycle, has been seriously considered. Also, the Korean Public Procurement Service announced that project over 50 billion Korean Won should introduce BIM into procurement starting from 2012. However, the studies and development have lack on studies of applying BIM and managing the data made using BIM in pre-design and maintenance stage. In pre-design stage, the concept of schematic design model is made to support for making major decisions concerning the size, shape and cost of the project. To decide the cost for the building in this stage by making use of BIM, estimating the amount of building materials used for constructing should be preceded. In this study, the pre-design BIM is explained to gain a better understanding of its process, since this paper focused on space programming stage. Finally, the paper suggests the concept process of estimating the amount of materials in building interior finishing from selecting the type for the elements of each space made to support the client for making decisions in space programming stage based on pre-design BIM.
As science and technology infiltrates every aspects of modern society in terms of economic and social growth and development, funding for research and development (R&D) is growing rapidly. Republic of Korea is not an exception in this trend and the R&D funding in Korea has been grown about 10% every year, recently. However, as the scope and size of funding grows exponentially, need for monitoring and managing these R&D projects becoming more and more imminent. Though different types of project management systems were developed by a variety of agencies and departments and used in monitoring and managing, these systems were developed as standalone silo type systems. These systems are not connected to each other while the same researchers may involved in different projects across agencies and department. Also, these management systems are not linked to the banking systems in which real transactions of funding occurs, such as cost reimbursement and financial audit of each R&D accounts. Historically, a few fraud and malappropriation cases were found and indicted. However, as the number of these incidents grows along with the growth of R&D funding, a large scale integration/linking of project management systems and banking systems. Realizing the importance of systems integration among agencies as well as with the banking systems, situational requirements analyses were conducted concerning the current state of R&D management system. As a results, a Real-time Case Management System (RCMS) was proposed as a solution to current problems. In this paper, the collected systems requirements were documents with analyses of the situation, the architecture of the integrated systems with more user-friendly technological alternatives. This large scale linkage requires interface standardization as well as modularization of interfaces. Proposed systems architecture is introduced here with technical details of Jex Framework used,, followed by resulting technical and economic performance of the Realtime Cashflow Management System (RCMS).
Kwon, Jung Woo;Park, Bo Young;Kang, So Ra;Hong, Seung Eun
Archives of Plastic Surgery
/
제44권4호
/
pp.283-292
/
2017
Background Settlements between doctors and patients provide a solution to complicated disputes. However, some disputes may be renewed as a result of negligence by both parties. The purpose of this study was to review the legal issues that may potentially arise during the preparation of settlement agreements and to propose a list of requirements for ensuring the effectiveness of these settlement agreements. Methods Data from 287 civil cases concerning aesthetic surgery that took place between 2000 and 2015 were collected from a court database in South Korea. Factors that influenced the effectiveness of settlement agreements were analyzed. Results Among the 287 court precedents, there were 68 cases of covenant not to sue. Eighteen cases were dismissed because the settlement agreements were recognized as effective, and 50 cases were sent forward for judgment on their merits because the agreements were not recognized as effective. The types of surgery and types of complications were classified by frequency. We evaluated the geographical distribution of the precedents, the settlement timing, and the effectiveness and economic impact of the settlements. We found that there was no statistically significant relationship among these factors. Four major factors that made a settlement agreement legally effective were identified, and the data showed that fee-free reoperations were not considered by the court in determining the compensation amount. Conclusions When preparing a settlement agreement, it is advisable to review the contents of the agreement rather than to take the preparation of a settlement agreement per se to be legally meaningful.
Objectives : The purpose of this study was to examine effect of the application of different types of coffee on teeth stain during home bleaching. Methods : Twenty five premolars that were extracted within the past month and healthy without any signs of dental caries or restorations were collected and divided into five groups. The teeth of a control group were bleached everyday for two weeks, and the teeth of four experimental groups were bleached everyday for two weeks and then deposited respectively in four different types of coffee solution: brewed coffee, black coffee, coffee with sugar, and coffee with sugar and cream. Afterwards, the color of the teeth of the four experimental groups was checked by a shade pilot. Results : As a result, there were significant differences in the change of lightness and color according to the blending type with the lapse of time during home bleaching. Concerning changes in lightness and hue, there were the largest differences in the control group and the experimental group deposited in coffee with sugar and cream, followed by coffee with sugar, black coffee and brewed coffee. When the extent of change in lightness and hue was investigated after home bleaching, the experimental group deposited in coffee with sugar and cream was stained the least, and the experimental group deposited in brewed coffee was stained the most. Conclusions : In conclusion, the intake of coffee that is the cause of stain should be reduced during bleaching, and in case of having a cup of coffee, it's advisable to have coffee with cream.
International Journal of Control, Automation, and Systems
/
제2권4호
/
pp.463-474
/
2004
Game theory is a method of mathematical analysis developed to study the decision making process. In 1928, Von Neumann mathematically proved that every two-person, zero-sum game with many pure finite strategies for each player is deterministic. In the early 50's, Nash presented another concept as the basis for a generalization of Von Neumann's theorem. Another central achievement of game theory is the introduction of evolutionary game theory, by which agents can play optimal strategies in the absence of rationality. Through the process of Darwinian selection, a population of agents can evolve to an Evolutionary Stable Strategy (ESS) as introduced by Maynard Smith in 1982. Keeping pace with these game theoretical studies, the first computer simulation of coevolution was tried out by Hillis. Moreover, Kauffman proposed the NK model to analyze coevolutionary dynamics between different species. He showed how coevolutionary phenomenon reaches static states and that these states are either Nash equilibrium or ESS in game theory. Since studies concerning coevolutionary phenomenon were initiated, there have been numerous other researchers who have developed coevolutionary algorithms. In this paper we propose a new coevolutionary algorithm named Game theory based Coevolutionary Algorithm (GCEA) and we confirm that this algorithm can be a solution of evolutionary problems by searching the ESS. To evaluate this newly designed approach, we solve several test Multiobjective Optimization Problems (MOPs). From the results of these evaluations, we confirm that evolutionary game can be embodied by the coevolutionary algorithm and analyze the optimization performance of our algorithm by comparing the performance of our algorithm with that of other evolutionary optimization algorithms.
유형성 볼밀을 사용하여 순수한 철분말 암모니아가스 분위기 중에서 기계적 합금화(MA) 처리를 하였다. 그 결과 질소함량이 23 at% 까지 준안정 질화철 분말을 얻을 수 있었다. 질화철 분말의 생성상은 질소 함량이 14.5 at% N 이하의 경우 bcc과포화 고용체가, 20.8 at% N에서는 고온에서 안정한 비평형 hcp 결정 분말이었다. MA법으로 제조한 Fe-N계 분말의 포화 자화는 질소농도가 증가함에 따라 단조로운 감소를 보였으며 보고된 bct 질화철에서의 포화자화값 증가와 대조적인 결과를 나타냈다. 질소원자 주위의 상세한 를 조사하기 위하여 중성자 회절 실험을 행하였다. 그 결과, 9.5 at% N의 질화철 분말의 경우 질소원자 주위의 철원자의 배위수는 3.9이었으며, 이러한 결정구조해석 결과로부터 질소원자는 철원자로 이루어진 4면체의 중심에 위치하고 있는 것으로 판단되었다.
탈질 특허분석과 전해기초연구를 통하여 수용액으로부터 질소의 환원제거에 대하여 조사하였다. 세계적으로 수용액으로부터 질소를 제거하는 방법으로 생물학적 기술과 산화환원 기술이 개발되고 있으며, 최근 들어 전해기술에 대한 특허출원도 증가하고 있다. 전해법에서 Fe를 음극으로 Pt를 양극으로 채택한 정전류 전해법에 의하여 1시간동안 총질소를 47% 이상 제거할 수 있었다. 질소함유 폐수를 처리하는 효율적인 방법은 폐수 특성에 맞는 기술의 조합이라고 말할 수 있다. 예를 들어 고농도 질소 함유 폐수를 소량 배출하는 경우 화학적 처리와 전해법의 조합으로 질산성 질소를 아질산성 질소로 일차 전환시켜 전해효율을 극대화시키면서 2차 오염원인 용해 금속이온을 전해과정에서 음극에 환원 회수하는 방법 등이 실용화에 유리하다고 말할 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.