• Molecules and Cells
• /
• 제45권7호
• /
• pp.502-511
• /
• 2022

Bacterial volatile compounds (BVCs) exert beneficial effects on plant protection both directly and indirectly. Although BVCs have been detected in vitro, their detection in situ remains challenging. The purpose of this study was to investigate the possibility of BVCs detection under in situ condition and estimate the potentials of in situ BVC to plants at below detection limit. We developed a method for detecting BVCs released by the soil bacteria Bacillus velezensis strain GB03 and Streptomyces griseus strain S4-7 in situ using solid-phase microextraction coupled with gas chromatography-mass spectrometry (SPME-GC-MS). Additionally, we evaluated the BVC detection limit in the rhizosphere and induction of systemic immune response in tomato plants grown in the greenhouse. Two signature BVCs, 2-nonanone and caryolan-1-ol, of GB03 and S4-7 respectively were successfully detected using the soil-vial system. However, these BVCs could not be detected in the rhizosphere pretreated with strains GB03 and S4-7. The detection limit of 2-nonanone in the tomato rhizosphere was 1 µM. Unexpectedly, drench application of 2-nonanone at 10 nM concentration, which is below its detection limit, protected tomato seedlings against Pseudomonas syringae pv. tomato. Our finding highlights that BVCs, including 2-nonanone, released by a soil bacterium are functional even when present at a concentration below the detection limit of SPME-GC-MS.

• 산업기술연구
• /
• 제18권
• /
• pp.203-208
• /
• 1998

Fatigue tests were performed to examine the 4 parameter method for specimens prepared by various heat treatment which resulted in different mechanical properties. Obtained main results are as follows. (1) Samples treated by austempering did not show the expected improvement of fatigue limit although hardness and strength increased. This is attributed to the fact that defect sensitivities of materials increase as increasing of hardness and tensile strength, it is also shown that the graphites acting as stress concentration place become larger by austempering heat treatment than by normal annealing. (2) It is very reasonable to predict the fatigue limit of ductile irons with 4 parameter method based on ${\sigma}_{TS}$, $H_v$, ${\Delta}K_{th}$ and ${\sqrt{area}}_{max}$. (3) The half-austempering treatment appeared to be more useful than the full-austempering method to improve the fatigue limit in the spheroidal graphite cast iron with multi defective material.

• Advances in Computational Design
• /
• 제8권3호
• /
• pp.191-217
• /
• 2023

The objective of this study was to evaluate the foundation structure of a 3.6-MW wind turbine generator (WTG) installed offshore in Western Korea. The ultimate limit state (ULS) and fatigue limit state (FLS) of the multi-pile steel foundation (MSF) installed at the Saemangeum offshore wind farm were structurally investigated using the finite element (FE) software, ANSYS Workbench 19.0. According to the ULS analysis, no plastic deformation was found in any of the components constituting the substructure. At the same time, the maximal stress value reached the calculation limit of 335 MPa. According to the FLS results, the stress concentration factor (SCF) ranged from 1.00 to 1.88 in all components. The results of this study can be applied to determine the optimal design for MSFs.

• 한국산업보건학회지
• /
• 제23권2호
• /
• pp.123-136
• /
• 2013

Objectives: This paper was prepapred to report airborne asbestos fiber concentrations in asbestos textile, brake-lining, commutator, and building materials manufacturing industries, and some other asbestos related industries in Korea from 1994 to 2006. Methods: Airborne asbestos data that have been sampled and analyzed in the above industries during 1994-2006 were collected. These data were reviewed to scrutinize the qualified data based on the records such as sampling and analyzed method and quality control procedures. All asbestos data were generated using the National Institute for Occupational Safety & Health (NIOSH) Method 7400. Results: Average concentration of asbestos fiber was 2.14 fibers/cc(0.02-15.6 fibers/cc) in the asbestos textile industry, 0.26 fibers/cc(0.01-1.01 fibers/cc) in the building-materials industry, 0.15 fibers/cc(0.01-0.93 fibers/cc) in the brake-lining manufacturing industry, and 0.14 fibers/cc(0.03-1.36 fibers/cc) in the commutator producing industry. For these industries, the percentage of samples of which asbestos fiber concentrations above the limit of exposure(0.1 fibers/cc) was 97.6% in the asbestos textile industry, 62.3% in the building-materials industry, 53.5% in the brake-lining manufacturing industry, and 34.3% in the commutator producing industry. Asbestos fiber concentration was below the limit of exposure in the gasket producing, petrochemistry, musical instrument producing industries, and the brake-lining exchange operations. Conclusions: Airborne asbestos fiber level in the asbestos textile, brake-lining producing, commutator and building-material producing industries was above the limit of exposure, but in the gasket producing, petrochemistry, musical instrument producing industries and the brake-lining exchange operations were below the limit of exposure.

• 유기물자원화
• /
• 제29권2호
• /
• pp.25-30
• /
• 2021

본 연구는 인산염 인 농도 측정과 관련하여 숙련도에 의해서 정도관리의 지표가 어떻게 개선되는지를 조사하였다. 아울러 분석기기의 종류에 따른 측정값의 차이가 있는지 함께 비교하였다. 분석자의 숙련도가 분석결과에 미치는 영향을 알아보기 위해 3인의 실험자가 2종의 분석기기를 사용하여 수질오염공정시험기준에 따라 인산염 인을 7회에 걸쳐서 방법검출한계와 정량한계를 측정하였으며, 실험결과 5회 이상 반복실험하면 정도관리지표를 만족하였다. 인산염 인의 정량한계는 0.02 mg/L로 계산되었으며, 분석기기가 다른 경우 정량한계 부근의 시료에 대한 흡광도와 농도가 통계적으로 유의미하게 차이가 있음을 확인하였다.

• 기본간호학회지
• /
• 제3권1호
• /
• pp.68-80
• /
• 1996

Long-term hemodialysis(HD) patients manifest various signs of protein and caloric malutrition due to poor intake of nutrients and other causes. Poor nutritional status increases the mortality and morbidity rates in HD patients. Thus, mataintnance of adequate nutritional status has been a major task in taking care of patients receiving HD. This study was to evaluate the nutritional status of HD patients and to clarify the degree of nutritional deficit based on usual dietary intake, anthropometric and biochemical indicators. Sixty HD patients comprised a HD group, while the control group consisted of 60 healthy adults whose age and sex matched those of the HD group. Nutritional status was evaluated by dietrary intake using instant nutritional scale, anthropometric measures, serum protein concentrations and the number of lymphocytes. The data were analyzed by using Chi-square test and unpaired t-test. The results are as follows. 1. Regarding usual dietary intake of HD group. 1) Estimated caloric intake was significantly lower than the recommended daily allowance(RDA) and among them, 35% were taking calories less than 85% of the RDA. 2) Estimated protein intake was significantly higher than the RDA and among them 40% were taking protein more than 115% of the RDA. 3) Estimated fat intake was lower than the RDA. 4) Vitamin A, B, $B_1,\;B_2$, C and niacin in take was lower than the RDA respectively. 5) Estimated ferrous intake was within the normal limit the RDA while estimated calcium intake was higher than the RDA. 6) Both calorie and protein intake were higher for the 10 patients who had been under continuous ambulatory peritoneal dialysis than for the patients under HD from the beginning. 2. Regarding anthropometric measures : 1) Body mass index(BMI), midarm circumference(MAC), and triceps skinfold thickness(TSF) were lower in the HD group than in the control group. 2) Among HD group, 47.1% were within the normal limit of BMI, while 86.7% were within the same limit in the control group. 3) Among HD group, 35.0% were within the normal limit of MAC, while 83.3% were within the same limit in the control group. 4) Among HD group, only 8.3% were normal, 30.3% were mild deficit status of TSF, while 50% were normal and 48.3% were mild deficit status in the control group. 3. Regarding biochemical laboratory tests 1) Albumin, transferrin concentrations and the number of lymphocytes were lower in HD group than in the control group. 2) Among HD group, 98.3% were within the normal limit of albumin concentration and all were within the same limit in the control group. 3) Among HD group, only 11.7% were within the normal limit of transferrin concentration, while 81.7% were within the same limit in the control group. 4) Among HD group, 25% were within the normal limit, while 93.3% were within the same limit in the control group. The above findings suggest that HD patients were in nutritional deficit status. Adequate diet therapy and periodical evaluation of the nutritional status in HD patients are needed. Accordingly, it turned out that anthropometric measures were very reliable parameters and easy to use to evaluate nutritional status. So nurses are encouraged to adopt anthropometric measures to examine nutritional deficit status of HD patients.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.145-157
• /
• 1999

Wood dust is created when machines are used to cut or shape wood materials. Industries of high risk of wood dust exposure are sawmills, dimension mills, furniture industries, and carpenters, etc. Health effects associated with wood dust exposure includes dermatitis, allergic respiratory effects and cancer. Health effects of wood dus t are mainly depend on the concentration, dust size and exposure time. This study were carried out to evaluate the concentration and particle size distribution of wood dust during working processes. The subjects of this study were 53 workers exposed to wood dust in 7 furniture factories and 5 musical instruments, and 5 sawmill factories. The average total wood dust concentrations measured by personal cascade impactor were $1.82{\pm}2.31mg/m^3$ in primary manufacture, $3.59{\pm}1.72mg/m^3$ in s econdary manufacture, $5.09{\pm}1.46mg/m^3$ in sanding operation. Mass median diameters of hardwoods dust were $3.36{\mu}m$ in primary manufacture, $4.25{\mu}m$ in secondary manufacture, $4.21{\mu}m$ in sanding operation. softwoods dust were $3.39{\mu}m$ in primary manufacture, $4.34{\mu}m$ in secondary manufacture. Particle size distributions showed a nearly the same pattern in each working processes. The sample concentration of all hardwood dust exceeded the Threshold Limit Value(TLV) and 20.8% of the softwood dust exceeded the Threshold Limit Value. The range of size distribution were $0.5-10{\mu}m$ in the soft and hardwood dust. The respirable dust of soft and hardwood took up 59% and above. Therefore new threshold limit value for wood dust should be needed in Korea. Also, it should be done for various studies on health effects related to occupational exposure of wood dust.

• Journal of Radiation Protection and Research
• /
• 제38권4호
• /
• pp.234-236
• /
• 2013

비밀봉 방사성물질을 취급하는 시설에서 이들 물질에 의한 작업환경의 다소간의 오염은 피할 수 없다. 오염의 우려가 있는 작업환경에서 오염관리의 일차적인 목적은 방사성물질의 잠재적 체내섭취로 인한 영향이다. 본 논문은 보수적 가정과 간단한 계산에 의거하여 공기오염에 따른 방사성물질의 공기중 농도와 흡입에 의한 연간 섭취량을 산출한 후, 관련 고시에서 정하는 유도공기중농도와 연간섭취한도와 비교함으로써 종사자의 내부피폭 정도를 평가하는 절차를 제공한다. 제시된 절차는 공기중 방사성물질 측정 및 내부피폭 감시의 필요성, 적합한 방호용구의 착용, 배기설비 설계를 위한 정보 획득 등 공기오염과 종사자의 내부피폭 감시를 위한 실무적 요건을 판단할 목적으로 활용될 수 있다.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1220-1226
• /
• 2007

21C 산업의 발전과 더불어 급증하고 있는 가스산업은 사용의 편리성과 위험성을 공존하고 있다. 특히 근대 산업혁명 이후 에너지 및 환경에 대한 문제가 두각을 나타내게 되었다. 따라서 환경친화적인 에너지원으로서 가스의 수요가 날로 급증하고 있다. 가스의 수요와 더불어 가스보일러의 설치 및 사용이 늘어나면서 보일러 폐가스(CO)에 의한 인명피해가 해마다 증가하고 있다. 따라서 본 논문의 목적은 보일러 곡관 배기통의 길이에 따른 CO농도의 고찰을 통하여 인체에 대한 위해성을 파악코자 함이다. CO의 허용농도인 50ppm에 해당하는 길이는 3곡관 1m에서 3분이 경과할 경우이다. 또한, 5m에서는 5분 경과부터 CO농도가 허용농도를 초과하는 것으로 나타났다. 특이하게 2m부터 4m까지는 CO농도가 허용농도 이하였다.

• 분석과학
• /
• 제37권4호
• /
• pp.230-238
• /
• 2024

This study evaluates a method for quantifying selenium (Se) concentration in soil using inductively coupled plasma mass spectrometry (ICP-MS), with oxygen as a reaction gas. This approach addresses the challenge of detecting low levels of Se in complex soil matrices and aims to effectively minimize interference problems typically associated with argon plasma in traditional ICP-MS analyses. The analytical method utilizes conditions optimized for minimizing spectral interference and were validated by linearity, accuracy, precision, limit of detection (LOD), and limit of quantification (LOQ). The method demonstrated good linearity, high accuracy (90-97 %), and remarkable sensitivity, achieving detection and quantification limits of 0.15 ㎍/kg and 0.44 ㎍/kg, respectively. Developed analysis method for Se in soil was applied to field samples in the different regions of South Korea and Se concentration ranged from 0.11 to 0.52 mg/kg. Correlation analysis between Se concentration and soil properties showed that Se concentration was significantly correlated with cation exchange capacity (CEC) and available phosphorus among other soil properties.