• Journal of Pharmaceutical Investigation
• /
• 제16권4호
• /
• pp.152-157
• /
• 1986

The pharmacokinetics of sulfamethoxazole were investigated in rabbits with folate-induced renal failure. The blood level, area under the blood concentration curve (AUC) and biological half-life were increased significantly, and the urinary excretion was decreased significantly compared with those of normal rabbits. Correlation of serum creatinine concentration and AUC, biological half-life, and correlation of creatinine clearance and renal clearance have linear relationship respectively. From these results, dosage regimen of sulfamethoxazole is considered to be adjusted for effective and safe therapy in renal failure.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.240.1-240.1
• /
• 2003

The purpose of this study was to investigate the effect of nifedipine (10 mg/kg) on the pharmacokinetic parameters and the bioavailability of paclitaxel (50 mg/kg) orally coadministered and pretreated in rats. The plasma concentration of paclitaxel in combination with nifedipine was significantly (p<0.05 at 10 mg/kg coadmin., p<0.01 at pretreat.) increased compared to that of control, from 2 hr to 24 hr. Area under the plasma concentration-time curve (AUC) of paclitaxel with nifedipine was significantly (p＜0.05 at 10 mg/kg coadmin., p＜0.01 at pretreat.) higher than that of control (omitted)

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.241.2-241.2
• /
• 2003

The purpose of this study was to investigate the effect of quercetin(2.0, 10, 20 mg/kg; combined or pretreated) on the pharmacokinetic parameters and the bioavailability of diltiazem(15mg/kg) orally to rabbits. The plasma concentration of diltiazem pretreated with quercetin(pretreated group) were increased significantly (p<0.01) compared to that of control, but those of diltiazem combined with quercetin(combined group) were not affected. Area under the plasma concentration-time curve (AUC) of diltiazem pretreated with quercetin was significantly ( p<0.01) higher than that of control (omitted)

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.245.3-246
• /
• 2003

The purpose of this study was to investigate the effect of quercetin(2.0, 10, 20 mg/kg; combined or pretreated) on the pharmacokinetic parameters and the bioavailability of paclitaxel(50mg/kg) orally in rats. The plasma concentration of paclitaxel pretreated with quercetin(pretreated group) were increased significantly (p＜0.01) compared to that of control, but those of paclitaxel combined with quercetin(combined group) were not affected. Area under the plasma concentration-time curve (AUC) of paclitaxel pretreated with quercetin was significantly (p＜0.01) higher than that of control. (omitted)

• 물과 미래
• /
• 제9권2호
• /
• pp.76-86
• /
• 1976

The 30-year design flood hydrograph for the Musim Representative Basin, one of the study basins of the International Hydrological Program, is synthesized by the method of unit hydrograph. The theory of unit hydrograph has been well known for a long time. However, the synthesis of flood hydrograph by this method for a basin with insufficient hydrologic data is not an easy task and hence, assumptions and engineering judgement must be exercized. In this paper, the problems often encountered in applying the unit hydrograph method are exposed and solved in detail based on the theory and rational judgement. The probability rainfall for Cheonju Station is transposed to the Musim Basin since it has not been analyzed due to short period of rainfall record. The duration of design rainfall was estimated based on the time of concentration for the watershed. The effective rainfall was determined from the design rainfall using the SCS method which is commonly used for a small basin. The spatial distribution of significant storms was expressed as a dimensionless rainfall mass curve and hence, it was possible to determine the hyetograph of effective design storm. To synthesize the direct runoff hydrograph the 15-min. unit hydrograph was derived by the S-Curve method from the 1-hr unit hydrograph which was obtained from the observed rainfall and runoff data, and then it was applied to the design hyetograph. The exsisting maximum groundwater depletion curve was derived by the base flow seperation. Hence, the design flood hydrograph was obtained by superimposing the groundwater depletion curve to the computed direct runoff hydrograph resulting from the design storm.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.312-316
• /
• 2004

Single-well tracer tests, especially push pull tracer tests, are more effective to estimate hydraulic parameters and microbial metabolic activities in terms of duration and cost compared to multi-well tracer tests. However, there are some drawbacks in accuracy, complicated data analysis and uniqueness. These shortages are thought to be derived from the applied conditions which affect mass recovery curve and breakthrough curve. Factors such as extraction rate, resting period, hydraulic conductivity and hydraulic gradient are considered as the major factors determining the mass recovery rate and shape of the breakthrough curve. The results of the sensitivity analysis are summarized as follows: 1) the significant change in concentration of breakthrough curve is obtained when the extraction rate increases. This effect would also be much higher if the hydraulic conductivity is lower; 2) the mass recovery rate decreases with the increase of resting time, and the difference of mass recovery rates for different resting times is inversely proportional to the hydraulic conductivity; 3) the sensitivity values decrease with time. The hydraulic conductivity affects not only the early period, but the later period of the breakthrough curves; 4) The influence of the hydraulic gradient on the breakthrough curves is greater at earlier stage than at later stage. The mass recovery rate is inversely proportional to the hydraulic gradient.

• 공업화학
• /
• 제29권6호
• /
• pp.789-798
• /
• 2018

고분자전해질 연료전지(PEMFC)의 성능을 예측할 수 있는 empirical equation의 역할이 중요하게 대두되고 있다. 본 연구에서는 polarization curve에서 activation loss, ohmic loss, mass transfer loss 영역을 분리하였고, 현재까지 개발된 model 중 Kim의 model과 Hao의 model을 선정하여 각 영역의 fitting을 시행하였다. 온도, 압력, 산소 농도 및 막 두께를 운전변수로 설정하여 조건 변화에 대한 각 loss의 변화를 비교하였다. 기존 model은 전반적으로 좋은 fitting 정확도를 보였지만, 분리된 loss 영역에서는 부정확한 fitting 결과를 보이기도 하였다. 연료전지 성능 예측의 정확도를 개선하기 위하여 converge coefficient를 도입한 새로운 model을 제안하였다. 본 연구에서 제안한 model을 연료전지 성능 예측에 적용한 경우에 신뢰도 평가에서 개선된 결과를 얻을 수 있었다.

• 한국환경보건학회지
• /
• 제22권3호
• /
• pp.56-63
• /
• 1996

The results of the water purification studies using water parsley (Oenanthe javanica) were obtained as follows. The removal rate of nutrient salts increased with longer plant growth periods. The results of this study use the assumption, log(T+1) = $K(C_0-C)^A$, based on Prakish's Theory. The initial concentration was calculated from experimental data. A and K are closely related to the initial concentration. It is possible to model the concentration of residual salts, as time goes by, if concentration is constant. It was observed that water parsley neutralizes acid and alkali substances promptly. The maximum suitable neutralization period is 48 hours. But water parsley withered up in strong acid and alkali solutions within a week. The removal efficiency of Cd progresses in 2 steps, which are unrelated to the initial concentration of Cd. The first part of the curve shows the concentration rapid rate of Cd removal, followed by a levelling off. The removal rate of $NO_x-N$ in the sample water tank containing 0.5 ppm Cd was between 50~80% but the removal rate was less than 20% for the higher concentration. On the other hand, increased amounts of $PO_4-P$ in the sample water tank from the third day on suspected that $PO_4-P$ was desorbed from the water parsley. The accumulation efficiency of Cd in plant was increased in proportion to the initial concentration of Cd. The accumulation phenomenon was observed in the tanks more than 50~100 times.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.103-107
• /
• 2022

Scaffolds are the structures that safely protect sensors in various parts of the body. Because of scaffolds must protect sensors from load, the tensile strength of the scaffolds must be higher than 750 kgf/cm². Currently, the tensile strength of scaffolds made with the 3d printer is 714 kgf/cm². We confirm that the tensile strength of the scaffolds increase using air with high nitrogen concentration. In this study, we conducted experiments to find nitrogen concentrations in which the tensile strength of the specimen is higher than 750 kgf/cm². The nitrogen control device and the nitrogen concentration sensor were installed in the chamber type 3d printer. The nitrogen concentration inside the 3d printer was changed by 5 % from 80 % to 100 %. Specimens of ASTM D 638 standard were produced under changed nitrogen concentration. We measured the tensile strength of specimens. We compared the tensile strength of specimens produced under each nitrogen concentration. We confirmed that when air with nitrogen concentration of 90 % was used, the tensile strength of scaffolds were 762 kgf/cm².

• Journal of Pharmaceutical Investigation
• /
• 제19권4호
• /
• pp.191-194
• /
• 1989

Bioequivalence test of $Asthcontin^{\circledR}$ tablet, a commercial slow-release theophylline (TP) dosage form, was performed using $Slo-bid^{\circledR}$ capsule as the reference. Since it has been confirmed that the saliva concentration of TP is closely correlated with the plasma concentration in man, the area under the saliva concentration-time curve was used as a bioavailability parameter. The statistical analysis showed that the two dosage forms are equivalent in bioavailability estimating from the saliva concentration. The results supported that the use of soliva as a test sample provides simple and easy techniques for bioequivalence tests of TP-containing dosage forms.