• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1133-1138
• /
• 2003

The pressure tubes, which contain high temperature heavy water and fuel, are within the core of a CANDU nuclear reactor, and are thus subjected to high stresses, temperature gradient, and neutron flux. Further, it is well known that pressure tubes of cold-worked Zr-2.5Nb materials result in hydrogen diffusion, which create fully-hydrided regions (frequently called Blister). Thus a proper investigation of hydrogen diffusion within zirconium-alloy nuclear components, such as CANDU pressure tube and fuel channels is essential to predict the structural integrity of these components. In this respect, this paper presents numerical investigation of hydrogen diffusion to quantify the hydrogen concentration for blister growth of CANDU pressure tube. For this purpose, coupled temperature-hydrogen diffusion analyses are performed by means of two-dimensional finite element analysis. Comparison of predicted temperature field and blister with published test data shows good agreement.

• 한국환경과학회지
• /
• 제11권7호
• /
• pp.705-711
• /
• 2002

In order to determine the factors causing Microcystis spp. bloom in the lower Nakdong River (Mulgum), we prepared wide ranges of pH, nutrient(N, P) concentration and the light through an enclosure experiment far 10days (pH gradient. 6.5, 7.5, 8.5, 9.5; gradient of N, P: ${\frac{1}{2}}DW+{\frac{1}{2}}River$ Water (RW), RW only; four different levels of nutrient addition/day; light: 100, 85, 60, 30, 15% of full sun light). From three days, the difference of Microcystis density in each enclosures was observed. The high density of Microcystis was maintained in the treatments over pH 9.5 and 85% of full sun light. However, in all nutrient treatments, relatively lower cell density than that of pH and light treatments was observed. These results suggested that pH and light input may play more important roles than nutrients in the early development of Microcystis bloom in the eutrophic lower Nakdong River.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권3호
• /
• pp.81-85
• /
• 2000

The effects of $NH_3$ flow rate and reactor pressure on Al composition and the interface of AlGaN/GaN heterostructure were studied. Equilibrium partial pressure of Ga and Al over AiGaN alloy was calculated as a function of growth pressure, $NH_3$flow rate and temperature. It was found equilbrium vapor pressure of Al is significantly lower than that of Ga, thus, the alloy composition mainly controlled by Ga partial pressure. We believe that more decomposition of Ga occur at lower $NH_3$ flow rate and higher growth pressure leads to preferred Al incorporation into AlGaN. The alloy composition gradient became larger at AlGaN/GaN heterointerface at higher reactor pressures, higher Al composition and low $NH_3$ flow rate. This composition gradient lowered sheet carrier concentration and electron mobility as well. We obtained an AlGaN/GaN heterostructure with sheet carrier density of ${\sim}2{\times}10^{13}cm^{-2}$ and mobility of 1250 and 5000 $cm^2$/Vs at 300 K and 100 K, respectively.

• 멤브레인
• /
• 제32권6호
• /
• pp.383-389
• /
• 2022

막 분리 공정은 다양한 응용 분야에서 사용되는 중요한 기술이다. 이러한 분리 공정은 농도 구배, 압력 또는 전위구배 등의 구동력에 의해 수행된다. 투과증발은 용액 메커니즘에 기초한 분리 과정 중 하나이다. 분리막을 투과한 쪽에서 압력은 진공에 의해 감소되고 분리는 압력차에 의해 구동된다. 다공성 제올라이트 분리막을 통한 탈수 공정에 의해 에탄올 또는 이소프로필 알코올과 같은 연료 및 화학 물질의 순도를 향상시킨다. 이러한 분리막들은 높은 열적, 화학적, 기계적 안정성을 가지고 있다. 이 총설에서는 제올라이트 분리막에 의한 에탄올 회수 및 바이오 오일 탈수라는 두 개의 섹션으로 나누어 소개한다.

• 한국공간구조학회논문집
• /
• 제23권3호
• /
• pp.87-94
• /
• 2023

Chloride is one of the most common threats to reinforced concrete (RC) durability. Alkaline environment of concrete makes a passive layer on the surface of reinforcement bars that prevents the bar from corrosion. However, when the chloride concentration amount at the reinforcement bar reaches a certain level, deterioration of the passive protection layer occurs, causing corrosion and ultimately reducing the structure's safety and durability. Therefore, understanding the chloride diffusion and its prediction are important to evaluate the safety and durability of RC structure. In this study, the chloride diffusion coefficient is predicted by machine learning techniques. Various machine learning techniques such as multiple linear regression, decision tree, random forest, support vector machine, artificial neural networks, extreme gradient boosting annd k-nearest neighbor were used and accuracy of there models were compared. In order to evaluate the accuracy, root mean square error (RMSE), mean square error (MSE), mean absolute error (MAE) and coefficient of determination (R2) were used as prediction performance indices. The k-fold cross-validation procedure was used to estimate the performance of machine learning models when making predictions on data not used during training. Grid search was applied to hyperparameter optimization. It has been shown from numerical simulation that ensemble learning methods such as random forest and extreme gradient boosting successfully predicted the chloride diffusion coefficient and artificial neural networks also provided accurate result.

• 산업기술연구
• /
• 제20권A호
• /
• pp.169-178
• /
• 2000

The 4-point bending tests have been performed In order to estimate the effect of TIG-dressing on fatigue strength and fatigue characteristics quantitatively for non load-carrying fillet welded joints subjected to pure bending. As a result of fatigue tests, fatigue strengths of as-welded specimens have satisfied the grade of fatigue strength prescribed in specifications of korea, AASHTO and JSSC. Fatigue strength at 2 million cycles of TIG-dressing specimens have increased compared with as-welded specimens. As the result of beachmark tests, fatigue cracks occurred at several points, where the radius of curvature and flank angle in the weld bead toes were low, and grew as semi-elliptical cracks, then approached to fracture. As a result of finite element analysis, stress concentration factor in weld bead toes has closely related to the flank angle and radius of curvature, and between these, the radius of curvature has more largely affected in stress concentration factor than flank angle. As a result of fracture mechanics approaches, the crack correction factor of test specimens has largely affected on stress gradient correction factor in case a/t is below 0.4. From the relations between stress intensity factor range estimated from FEM analysis and fatigue crack growth rate, fatigue life has been correctly calculated.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.167-172
• /
• 2020

The effectiveness of in situ sediment capping as a technique for heavy metal risk mitigation in Hyeongsan River estuary, South Korea was studied. Sites in the estuary were found previously to show moderate to high levels of contamination of mercury, methylmercury and other heavy metals. A 400 m x 50 m section of the river was selected for a thin layer capping demonstration, where the total area was divided into 4 sections capped with different combinations of capping materials (zeolite, AC/zeolite, AC/sand, zeolite/sand). Pore water concentrations in the different sites were studied using diffusive gradient in thin film (DGT) probes. All capping amendments showed reduction in the pore water concentration of the different heavy metals with top 5 cm showing %reduction greater than 90% for some heavy metals. The relative maxima for the different metals were found to be translated to lower depths with addition of the caps. For two-layered cap with AC, order of placement should be considered since AC can easily be displaced due to its relatively low density. Investigation of methylmercury (MeHg) in the site showed that MeHg and %MeHg in pore water corresponds well with maxima for sulfide, Fe and Mn suggesting mercury methylation as probably coupled with sulfate, Fe and Mn reduction in sediments. Our results showed that thin-layer capping of active sorbents AC and zeolite, in combination with passive sand caps, are potential remediation strategy for sediments contaminated with heavy metals.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.65-70
• /
• 2001

OH radical and NOx have been measured in a methane-air partially premixed flame using PLIF technique to define preheated air combustion characteristics. The temperature of mixture is determined by 300K, 400K, 600K and 800K below the auto-ignition temperature respectively. Flame height increases as equivalence ratio increased. As initial enthalpy is supplied, the radius of flame was increased and much amount of yellow flame in rich equivalence ratio was observed. This is due to the faster burning velocity. Also initial oxidization begins earlier as the initial temperature of mixture increased. It means that height of premixed flame front decreased. This phenomenon can be observed OH PLIF image. The qualitative analysis of OH concentration in the PLIF image shows that overall OH concentration increases with equivalence ratio and the initial temperature of mixture increased. At the preheating temperature goes up, axial gradient of OH concentration is less steep than that of lower temperature condition. This may identify that combustion reacts continuously, so preheated air combustion can evade the local heating and make high temperature indiscriminately in the overall reaction zone.

• 설비공학논문집
• /
• 제16권1호
• /
• pp.1-7
• /
• 2004

This study has been numerically conducted to investigate the removal efficiency of Volatile Organic Compound (VOC) for different photocatalytic honeycomb filters. Recently, the photocatalysis is being applied to air-cleaner, air-conditioner and vacuum-cleaner with the capability of air-purification, sterilization and antibiosis. However, photocatalysis is less efficient than other methods for removing VOC except in the case of low concentration. So far most of studies have focused on an improvement of the photocatalytic materials, but this study have placed emphasis on the improvements of shape of photocatalytic honeycomb filter. UV irradiation, concentration profile and pressure drop have been investigated for different cross sections of filters and for different filter lengths. Light intensity is dropped sharply with increasing distance from the UV-lamp, and becomes very low in the middle of the filters. Since photocatalytic reaction rate is a function of light intensity, VOC concentration gradient might be small in the middle of long filters. Thus, most of reaction have risen within only three times of dimensionless axial distance. These results can be used effectively for the design of advanced photocatalytic honeycomb filters.

• 한국치위생학회지
• /
• 제17권3호
• /
• pp.381-394
• /
• 2017

Objectives: This study aims to evaluate carbonated drinks induced dental caries with qualitative analysis and to compare with oral organic acids including lactate, acetate, propionate, formate, butyrate, pyruvate and valerate which cause caries when taking either 10% sucrose drinks or carbonated drinks. Methods: Saliva was collected from six study subjects before and after (start, 5, 10, 30 minutes) taking water intake upon (A) 10% sucrose intake, (B) 10% sucrose intake, and (C) carbonated drink intake, then they were centrifuged at 1,200 rpm followed by removing bacteria and enzymes with syringe filtering, performing a qualitative analysis with HPLC conductivity detection (GP50 gradient pump, ED 50 detector) after saliva pre-treatment under isocratic 100 mM NaOH mobile phase. Results: Higher risk of dental caries was evaluated in order of C>B>A, with the results of total oral organic acids' concentration, lactates of organic acids and organic acids produced after 5 minutes from the 3 types of drinks intake. Conclusions: Carbonated beverages were estimated to develop higher dental caries induction than beverages containing 10% sucrose because of the high organic acid concentration in the mouth after its intake.