• Journal of Korean Foot and Ankle Society
• /
• v.16 no.1
• /
• pp.53-57
• /
• 2012

Purpose: To study computerized measurements of angular parameters on 100% and 150% resized digital radiography of hallux valgus deformity Materials and Methods: 30 digital radiography of standing foot anteroposterior view of hallux valgus patients were included. Two observers(A, B) independently measured hallux valgus angle (HVA), 1-2 intermetatarsal angle (IMA), and distal metatarsal articular angle (DMAA) in two times on both 100%-size and 150% magnified images respectively, using computerized measurement software tools. The results were interpreted with the statistical software program, Statistical Analysis System, version 9.2. Results: In repeated measurements of each observer, measurements on 150% magnified image showed no differences of all three parameters and with 100%-size image, there were differences of HVA (observer A) and 1-2 IMA (observer B) (p>0.05). When testing interobserver reliability, both observers showed differences in measurement of HVA and DMAA (p<0.05), but no differences in measurement of 1-2 IMA in both images. Within the 95% confidence interval, limits of error of measurements between two observers on HVA, IMA and DMAA were $2.7^{\circ}$ $1.4^{\circ}$ and $5.0^{\circ}$ respectively in 100%-size images, and $2.6^{\circ}$, $1.6^{\circ}$ and $4.7^{\circ}$ respectively in 150% magnified images. Conclusion: In computerized measurements for angular parameters of hallux valgus with digital radiography, 150% magnified images showed intraobserver reliability. Both 100% and 150% magnified images failed to show interobserver reliability. Measurement of 1-2 IMA in both 100% and 150% images showed less interobserver error.

• Journal of Korean Foot and Ankle Society
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2009

Purpose: To study the reliability of intra- and interobserver reliability in angular measurement of hallux valgus deformity by assessing hallux valgus angle (HVA) and the 1st to 2nd intermetatarsal angle (1-2 IMA) through using computerized system. Materials and Methods: 20 cases of moderate to severe hallux valgus patients were included in this study. With the standing anteroposterior view of foot, the HVA and 1-2 IMA were calculated by computerized measurement system of Infinity cooperation, called ${\pi}$-view, with its software tools. Using the statistical software program, SPSS (version 12th), we interpreted the results which were measured by two independent observers. Results: In the intraobserver measurement, the HVA of observer A showed reliability ($32.5^{\circ}{\pm}6.9$ and $33.1^{\circ}{\pm}6.8$)(p<0.05). 1-2 IMA in observer A was not regarded as reliable ($16.9^{\circ}{\pm}2.8$ and $17.1^{\circ}{\pm}2.8$)(p>0.05). In the results of observer B, HVAs were measured as $35.7^{\circ}{\pm}7.6$ and $36.2^{\circ}{\pm}7.7$, and were not reliable (p>0.05). 1-2 IMA in observer B was not reliable as well ($17.0^{\circ}{\pm}0.8$ and $20.8^{\circ}{\pm}1.5$)(p>0.05). In the interobservers' measurements, the first and the second results of HVA were $3.2^{\circ}{\pm}3.6$ and $3.1^{\circ}{\pm}3.1$, reliable within the 95% confidence interval (p<0.05). 1-2 IMAs were $0.1^{\circ}{\pm}1.9$ and $3.73^{\circ}{\pm}1.3$, which were not reliable (p>0.05). Conclusion: In the angular measurement of the hallux valgus by computerized system, the HVA and 1-2 IMA showed less error range in the interobserver's results, compared with the previous studies about the manual measurement. However, our results failed to show the statistical reliability of intra- and interobserver's measuring. Therefore, even the computerized angular measurements in the severity of hallux valgus require development of the measuring methods and software tools.

• Journal of Korean Academy of Nursing
• /
• v.39 no.6
• /
• pp.781-787
• /
• 2009

Purpose: The purpose of this study was to evaluate a computerized touch-screen version of the asthma-specific quality-of-life (cA-QOL) questionnaire against the conventional paper-and-pencil version (pA-QOL) for equivalence, time for completion, user preference, and ease of use. Methods: A total of 261 patients were recruited. A randomized cross-over design was used. Patients in group A completed the cA-QOL first while waiting to see a physician, and completed the pAQOL version after seeing the physician. Patients allocated in group B completed these questionnaires in the reverse order. The patients were asked questions about user preference and ease of use of the cA-QOL. The time taken to complete both versions of the questionnaire was measured. Results: Weighted kappa coefficients of all items showed almost perfect agreement. The time required to complete the pA-QOL is faster than the time for cA-QOL. The patients who preferred the cA-QOL were 37.5%, while those who preferred the pA-QOL were 29.9%. Most patients reported that the cA-QOL was "easy" or "very easy" to complete. Conclusion: The cA-QOL is the computerized equivalent of the pA-QOL. The findings herein demonstrate that the cA-QOL can be helpful to nurses in busy practices for assessing, collecting, and evaluating their patients' health related quality of life.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.1
• /
• pp.103-109
• /
• 2016

The performance of a multi-head, computerized combination scaling system to automatically identify a group of agricultural products having a total weight within the target range has been optimized to reduce the package cycle time of the merchandise. First, the structure of the scale was modified to enable faster measurement by enhancing the dynamic stability during the process. Second, the high frequency noise in the measured signal was eliminated by a high frequency filter to provide more accurate weight data. Finally, the algorithm to identify a group of products with a total weight within the target range was modified to enable a user to select an optimal number of scales. According to the experimental verifications, this modified system reduced the package cycle time significantly and also was accurate in measuring the total weight of the selected products.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1990.10a
• /
• pp.23-25
• /
• 1990

In this paper, a system to measure tree degradation of three dimensional phenomena in organic insulating materials using image processing system is discussed. Using a computerized tomography method, volume of tree immediately after tree initiation, as well as changes in the configuration of the tree were measured, which up to now have been difficult to measure. The specimens used an acrylic acid resin. As a result, it was possible to record the cross sections of the tree, and to describe the volume of the tree by the three dimensional measurement.

• Journal of Periodontal and Implant Science
• /
• v.37 no.1
• /
• pp.103-113
• /
• 2007

The purpose of this study was to measure the thickness of masticatory mucosa in the hard palate as a donor site for mucogingival surgery by using computerized tomography(CT), Thickness measurements were performed in 84 adult patients who took CT on maxilla for implant surgery and 24 standard measurement points were defined in the hard palate according to the gingival margin and mid palatal suture. Radiographic measurements were utilized after calibration for standardization. Data were analyzed to determine the differences in mucosal thickness by gender, age, tooth positions and depth of palatal vault. The results of this study were as follows: 1. Mean thickness of palatal masticatory mucosa was $3.93{\pm}0.6mm$ and females had significantly thinner mean masticatory mucosa($3.76{\pm}0.56mm$) than males($4.04{\pm}0.6mm$)(p<0.05). 2. The thickness of palatal masticatory mucosa increased by aging. 3. Depending on position, masticatory mucosa thickness increased from canine to premeolar, but decreased at the first molar, and increased again in the second molar region(p<0.0001). 4. No significant difference in mean thickness of palatal masticatory mucosa were indentified between low palatal vault group and high palatal vault group(p>0.05). The results suggest that canine and premolar area appears to be the most appropriate donor site for soft tissue grafting procedure. The measurement of the thickness of palatal masticatory mucosa by using computerized tomography can offer useful information clinically but further studies in as-sessing the validity and reliability of the method using computerized tomography is needed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.9 no.2
• /
• pp.9-25
• /
• 1983

The purpose of this study was to film up computerized analyses for both kinematic posture(film analysis) and muscle dynamics (EMG) during a weight-lifting motion. (Snatch, Clean and Jerk) Using a motor drive camera (3.5 frames/sec) and a Location Analyzer, motion tracks of 13 landmarks, which were attached to the major joints, during the motion were converted into digital values. At the same time, EMG amplitudes from 11 major muscle groups were recorded. Recorded data were processed via analog/hybrid computer (ADAC 480) and digital computer (PDP 11/44). Landmark locations and EMG amplitude were integrated by a computerized routine. Computer output included graphic reproductions on sepuential dislocations of body segments, center of gravity of body segments and the associated changes on EMG amplitude such as % EMG's of major muscle group during a weight lifting motion. The results strongly suggest that the computerized motion-EMG integration can provide a further working knowledge in selection and in training of workers and athletes. Suggestions for a further study include additional device for velocity measurement, expansion of the link model for biomechanical analysis and other implementations necessary for athletic application.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.146-149
• /
• 1997

Computerized densitometry was developed or the quantitative measurement of diffuse retinal nerve fiber layer (RNFL) atrophy and intra- and inter-operator reliability and clinical validity of this system were evaluated. Vertical diameter, center of the optic disc, and peripapillary circles which had radii of 1.5 and 2.5 times that of the optic disc were user-interactively determined in digitized RNFL photograph and density profile along each circle was measured and normalized. The areas under the normalized density profiles of the superior and the inferior segments in both circle were used or the study of RNFL. To determine the variability and correspondence in the measurements of density variations, 21 RNFL photographs of glaucoma patients which showed varying degrees of atrophy underwent computerized densitometry by two operators on two separate occasions. Coefficient of variation in the densitometric measurements was $1.2{\sim}5.4%$. Intra- and inter-operator reliabilities were excellent. The correlations between the densitometric values and mean deviations of Humphrey C30-2 visual field showed statistical significance. Computerized densitometry of RNFL photographs was useful in the objective and quantitative assessment of diffuse RNFL atrophy.

• Journal of the Ergonomics Society of Korea
• /
• v.14 no.1
• /
• pp.69-81
• /
• 1995

Few studies on the biomechanical analysis of hand postures and tool handling tasks exist because of the lack of appropriate measurement techniques for hand force. A measurement system for the finger forces and joint angles for the analysis of manual tool handling tasks was developed in this study. The measurement system consists of a force sensing glove made from twelve Force Sensitive Resistors and an angle-measuring glove (Cyberglove$^{TM}$, Virtual technologies) with eighteem joint angle sensors. A biomechanical model of the hand using the data from the measurement system was also developed. Systems of computerized procedures were implemented inte- grating the hand posture measurement system, biomechanical analysis system, and the task analysis system for manual tool handling tasks. The measurement system was useful in providing the hand force data needed for an existing task analysis system used in CTD risk evaluation. It is expected that the hand posture measurement developed in this study will provide an efficient and cost-effective solution to task analysis of manual tool handling tasks.s.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.467-477
• /
• 1994

The objective of this research is to develop a manufacturability measurement model for process and material screening. The process and material screening is the key requirement for implementing the Design for Manufacturability (Concurrent Engineering). A computerized system realizing this model then is developed to aid designers. Identification of the key factors which influence technical manufacturability, decision variables and their characteristics, conceptual framework for implementing the model are suggested. Manufacturability measure for quantifying the consistency of between the product requirements and the manufacturing capability is important contribution of this research. The focus is on net shape manufacturing process such as diecasting, forging, metal forming and injection molding.